Engineering
Engineering
Engineering is the art of applying science, mathematics, and creativity to solve technological problems. The accomplishments of engineering can be seen in many every aspects of our daily lives, from transportation to communications, entertainment to health care. And, although each of these applications is unique, the process of engineering is largely independent. This process begins by carefully analyzing a problem, intelligently designing a solution for that problem, and efficiently transforming that design solution into physical reality.
Analyzing the problem
Defining the problem is the first and most critical step of the problem analysis. To best approach a solution, the problem must be well understood and the guidelines or design considerations for the project must be clear. For example, in the creation of a new automobile, the engineers must know if they should design for fuel economy or for brute power. Many questions like this arise in every engineering project, and they must all be answered at the very beginning if the engineers are to work efficiently toward a solution.
When these issues are resolved, the problem must be thoroughly researched. This involves searching technical journals and closely examining solutions of similar engineering problems. The purpose of this step is two-fold. First, it allows the engineer to make use of a tremendous body of work done by other engineers. And second, it ensures the engineer that the problem has not already been solved. Either way, the review allows him or her to intelligently approach the problem, and perhaps avoid a substantial waste of time or legal conflicts in the future.
Designing a solution
Once the problem is well-understood, the process of designing a solution begins. This process typically starts with brainstorming, a technique by which members of the engineering team suggest a number of possible general approaches for the problem. In the case of an automobile, perhaps conventional gas, solar, and electric power would be suggested to propel the vehicle. Generally, one of these is then selected as the primary candidate for further development. Occasionally, however, if time permits and several ideas stand out, the team may elect to pursue multiple solutions to the problem. More refined designs of these solutions/systems then “compete,” and the best of those is chosen.
Once a general design or technology is selected, the work is sub-divided and various team members assume specific responsibilities. In the automobile, for example, the mechanical engineers in the group would tackle such problems as the design of the transmission and suspension systems. They may also handle air flow and climate-control concerns to ensure that the vehicle is both aerodynamic and comfortable to ride in. Electrical engineers, on the other hand, would concern themselves with the ignition system and the various displays and electronic gauges. They would also be responsible for the design of the communication system which links all of the car’s subsystems together. In any case, each of these engineers must design one aspect which operates in harmony with every other aspect of the system.
Bringing it to life
Once the design is complete, a prototype or preliminary working model is generally built. The primary function of the prototype is to demonstrate and test the operation of the device. For this reason, its cosmetics are typically of little concern, as they will likely change by the time the device reaches the market.
The prototype stage is where the device undergoes extensive testing to reveal any bugs or problems with the design. Especially with complex systems, it is often difficult to predict (on paper) where problems with the design may occur. If one aspect of the system happens
KEY TERMS
Brainstorming— A process by which engineers discuss and suggest multiple possible approaches for solving a problem.
Design considerations— A set of guidelines or key issues that engineers must follow when they design a particular project.
Prototype— A preliminary working model of an engineering design, primarily used for testing and not for “show.”
to fail too quickly or does not function at all, it is closely analyzed and that sub-system is redesigned and retested (both on its own and within the complete system). This process is repeated until the entire system satisfies the design requirements.
Once the prototype is in complete working order and the engineers are satisfied with its operation, the device goes into the production stage. Here, details such as appearance, ease of use, availability of materials, and safety are given attention and generally result in additional final design changes.
The foregoing account is procedural or mechanical, but there are also personal and ethical dimensions to engineering. Engineers may enjoy their work, or not; they may have ethical concerns about how their employers ask them to do their work, or about the nature of the work itself. Many technologies have had unintended side effects; others have intended side effects that may be ethically questionable. Indeed, the survival of the human race has been called into question by the unintended and intended effects of devices produced by engineers, including the automobile, the oil rig, and the nuclear weapon. Unlike the pure understanding produced, ideally, by physics, the products of engineering always have an economic, ecological, and human aspect that cannot be ignored.
Resources
BOOKS
Baine, Celeste. Is There An Engineer Inside You?: A Comprehensive Guide To Career Decisions In Engineering. New York: Professional Publications, 2005.
Echaore-McDavid, Susan. Career Opportunities in Engineering. New York: Checkmark Books, 2004.
Eilam, Eldad. Reversing: Secrets of Reverse Engineering. New York: Wiley, 2005.
Scott Christian Cahall
