Air Products and Chemicals, Inc.
Air Products and Chemicals, Inc.
P.O. Box 538
Allentown, Pennsylvania 18105
U.S.A.
(215) 481-4911
Public Company
Incorporated: October 1, 1940 as Industrial Gas Equipment Co.
Employees: 18,700
Sales: $2.040 billion
Market value: $2.632 billion
Stock Index: New York
As a teenager George Pool, founder of Air Products, sold oxygen to industrial users. By the age of 30 Pool was district manager for Compressed Industrial Gases. In 1938, when Pool began his work, the oxygen market was dominated by large companies like Linde and the Air Reduction Company which avoided price wars and did not intrude in each other’s sales territory. Oxygen is inexpensive to distill and the raw material from which it is distilled, namely air, is free. When Pool founded his company, now the second largest of its kind, the chief cost of oxygen to the customer was the cost of shipping it in heavy containers. Pool’s idea was to distill oxygen in the customer’s plant. The cost of this plan would have been prohibitive unless a cheap oxygen generator could be designed.
Pool, the son of a boiler-maker, had only a high school education, but he set out to design the generator he needed. He hired a young engineer by the name of Frank Pavlis to work with him. The design they came up with was revolutionary because it used a compressor lubricated with liquid oxygen and graphite. The competitor’s compressors were lubricated with water due to the fear that the compressed oxygen, in contact with a lubricating oil, would ignite when exposed to the smallest spark. However, when oxygen was compressed using water, several steps were required to then remove the water from the oxygen. Pool’s generator could skip these steps and, as a result, it was less expensive to build, install and maintain.
By 1940 Pool and Pavlis had a functioning generator. Pool quit his job, sold his insurance policy and borrowed all the money that his wife (a school teacher) had saved. With this money he founded Air Products Inc., and opened shop in a building that had been a mortuary. A mortuary was an appropriate place to start a new business given the gloomy business climate that prevailed during the last years of the Depression. In the beginning, Pool had a great deal of difficulty selling his generators.
The situation improved for Air Products during World War II because it manufactured mobile oxygen generators for the armed services and heavy industry. When the war ended Air Products found itself without customers and was forced to aggressively pursue new accounts. Although Air Products could provide oxygen at a cost 25% lower than its competitors, it had to convince its customers of the benefits of the new system, where the customer leased the generator on a 5-10 year basis. Air Products maintained the generator and taught the customer’s employees how to operate it. Many potential customers liked the idea, but were locked into long term contracts with a company that shipped oxygen to their plants.
In desperation, Pool went to Pittsburgh and used a sales technique called “door-stepping” to win a major contract with Weirton Steel. This sales technique involved staying at the customer’s plant until the contract was signed. Pool said years later, “God, we just lived at Weirton Steel when we learned they were interested in our proposition.” Indeed, Weirton was practically Air Product’s only customer.
Air Products knew it was in a precarious position and said as much in the prospectus they sent out to potential investors when the company needed funds for a new plant. “The Company... has no background in prewar civil business... proposes to compete by a new method of distribution in a well-established field against experienced competitors who have much greater resources... expects to operate at a loss following the completion of its government contracts.” The company’s boldness and candor impressed investors and the necessary 300,000 dollars was raised. Soon Air Products installed generators at a number of chemical companies and built a huge generator for Weirton Steel (a generator 100 times larger than any that had been built before).
Air Products was a combative little company and part of its success was due to the “tiger pack” as Pool called the group of aggressive young salesmen-engineers that he surrounded himself with. Pool occasionally assumed the role of manager, dealing out a tongue-lashing to any of those young men who had misled a customer or lost a sale. Otherwise, he was reputed to have a good sense of humor and to take care of his employees.
In the mid-1950’s Air Products gained an opportunity from the launching of the first Sputnik, which American scientists surmised was powered by liquid hydrogen. The U.S. also wanted liquid hydrogen, and Air Products was asked to supply it. As a security precaution the new Air Products Company plants were provided with code names like “Baby-Bear” and “Project Rover.” One large plant was disguised as the “Apix Fertilizer Company.”
Air Products was now making liquid hydrogen and also branching out into new areas of chemistry like fluorine chemistry and cryogenics (the science of ultra-low temperatures). The oxygen business continued to grow. The company no longer leased generators, but built multi-million dollar operations near major customers like Ford and U.S. Steel, and sold any excess capacity to smaller customers.
Throughout the 1960’s the company was very successful. In the course of the decade sales rose 400% and earnings rose 500%. The expansion into merchant gas (gas sold in tanks) was profitable for the company, although Air Products was a latecomer to the field. Air Products used its Johnny-come-lately status to its advantage by conceding the saturated markets to its well-established rivals, Linde and Air Reduction Co., and sought out smaller, more receptive markets instead. During the time that Air Products saw its fortunes rising, competitors like Linde saw its profits decreasing.
In the 1960’s oxygen-fired furnaces became more popular for steel-making than older, hearth-style furnaces, and this increased oxygen consumption. Nitrogen, another Air Products specialty, was in demand as a refrigerant. Air Products not only sold gas, but also the implements to handle it: welding tools, anesthesia equipment and cryogenic systems were numbered among its wares. Gases and gas-related equipment accounted for approximately 3/4 of Air Product’s profits during the 1960’s. The remainder came from chemicals and engineering services.
The diversification of Air Products into chemicals began in 1962 with the company’s purchase of Houdry Chemicals and later Air Company, a specialty chemical company. Air Products had better luck with Air Company than the previous owners. When the plant was purchased it was losing money, but the management at Air Products took Air Company’s acetylic chemicals and made them into specialty chemicals which fetched a higher price. The plant became profitable right away. In 1969 Air Products purchased Escambia Chemicals (for cash) at a price well below its market value. Escambia’s attraction lay in a product called DABCO, supposedly the best catalyst for making urethane foam.
Due to the energy crisis and a recession, the 1970’s was a difficult period of time for many chemical companies. Air Products could not sustain the phenomenal growth it experienced in the 1960’s, but each year its sales and profits increased at least 9% in bad years and over 20% in good ones. The company held a strong position in industrial gases both in the U.S. and abroad, and its gases were used by virtually every major industry. Its chemical division performed erratically, and during the recession its engineering services division (which designs pipelines and plants) yielded disappointing results, but industrial gases kept the company afloat.
The energy crisis had a strong influence on the company in both positive and negative ways. The industrial gases division, which consumed a large amount of electricity, was sensitive to rising utility rates. However, as the price of organic fuels rose oxygen became a more attractive fuel to burn. The increased production costs of petro-chemicals and plastics were offset by higher demand for cryogenic equipment and gases to liquify natural gas. Air Products, like many other successful chemical companies, found a bright side to high energy prices.
The oil embargo convinced the management at Air Products to invest in synthetic fuels. In 1980 Air Products, Wheelbraton Fry Inc., the State of Kentucky and the U.S. Department of Energy formed a joint venture to produce a high energy, low pollution fuel from coal. Air Products invested $45 million in the project; however, the bulk of the money, $748 million, came from the Federal Government. None of the various synfuel projects were successful, so Air Products’ only consolation was the high levels of oxygen consumed in the unsuccessful venture. Yet Air Products remains interested in energy development. In 1985 it bought a methane recovery plant and accelerated development of a plant that converts garbage to steam and electricity.
Despite the disappointment of the synfuel project, Air Products sales grew an average of 20% per year throughout the 1970’s. A 12-year $281 million contract to supply liquid hydrogen for the space shuttle helped, and so did the discovery of expanded uses for industrial gases. For instance, the food industry increased its use of hydrogen for hydrogenating vegetable oils and flash-freezing, a process which requires nitrogen, became an increasingly more popular technique.
In the 1970’s and the early 1980’s as well, Air Products shared certain qualities with other highly successful chemical companies of the same size. One was finding a way to turn the energy crisis to its advantage, even if escalating petroleum costs posed some minor problems. The second was having a product that was used by a myriad number of industries so that the company was not in a situation where the fortunes of its staple products were linked to the fortunes of a cyclical industry. For example, the American steel industry is a major customer for Air Products oxygen, but there are so many other customers for its industrial gas that the depressed market for steel is not fatal to the company. In its annual reports Air Products rarely mentions the obvious advantages it has over other chemical companies with a less diverse product mix. Instead, it attributes its success to its employees, in particular, to those with technical training.
Although statements about the importance of “people-power” are obligatory in its annual reports, nevertheless, Air Products emphasis on employees at times is more than a mere recitation of platitudes. One indication of this is the company’s recruitment policy. Rather than leaving recruitment to professionals the company President, Edward Donley, the vice-presidents, and the 57 line managers all spend some time interviewing graduating engineers, chemists and M.B.A.’s. Donley has said that he likes to visit college campuses in order to find the best possible job candidates. The high level company executives, he says, are better judges of an applicant’s potential than a professional recruiter. The applicants who are eventually hired by Air Products may spend up to three years working in different departments of their choice in order to decide where their skills will be best employed. Air Products believes the exposure of engineers and chemists to management positions will be helpful later on in their careers.
The company’s attitude towards the health of lower echelon workers compares favorably with most other chemical companies. In the 1970’s, when three employees died from PVC induced cancer, Air Products periodically tested 492 other workers at two plants for possible exposure. Steps were taken to minimize health risks. At the same time, the company initiated a legal challenge to OSHA regulations, which it claimed were unfeasible to implement.
For the next decade or two Air Products will most likely continue its slow but steady growth. Industrial gases will remain a staple product, and should be relatively safe from most economic problems. The company plans to invest in its core industries: gases, chemicals, engineering equipment and engineering services. Amines and urethane will continue to be important chemicals. The chemical division, while profitable, has never realized Donley’s goal of providing 50% of total profits. Its contribution to company profits tends to hover around 30%, but Donley has no intention of giving up. In fact, the chemical division will likely be strengthened by the acquisition of small companies. The company has no plans for diversification into unfamiliar areas. If any division causes a problem it will be the engineering services division which provides 5-10% of revenues and is not recession-proof.
Principal Subsidiaries
Air Products, Inc.; Air Products Capital Corp.; Air Products Manufacturing Corp.; American REF-FUEL Co. of Texas; Arcain Co.; Catad, Inc.; Catalytic, Inc.; GSF, Inc.; GSF Energy Inc.; Middletown Oxygen Co., Inc.; Prodain Corp.; Stearns-Catalytic Corp.; Stearns-Roger, Inc.; Steams-Roger Manufacturers, Inc. Air Products also has subsidiaries in the following countries: Belgium, Brazil, Canada, France, The Netherlands, United Kingdom, Virgin Islands and West Germany.
