Luminescence
Luminescence
Light generation by a process other than by heating is luminescence. For example, an incandescent light bulb, in which the filament is heated until it is literally white-hot, is not luminescent; a fluorescent light tube (which is cool to the touch) is luminescent. Luminescence is generated as part of a process in which atoms or molecules with electrons excited into higher energy states shed energy by emitting visible light.
People have observed luminescence in nature for centuries. In the early twentieth century, Marie Curie, in her doctoral thesis, mentioned that calcium fluoride glows when exposed to the radioactive material, radium. In the past 50 years, the use of luminescent devices, such as fluorescent lights and television screens, has become widespread.
Luminescence can be divided into categories by duration (fluorescence or phosphorescence) or by the mechanism that creates the light. By definition, fluorescent things stop emitting light very soon (about 10 nanoseconds; a nanosecond is 10-9 seconds) after the excitation energy is cut off. Phosphorescence continues for longer than fluorescence. Glow-in-the-dark stickers and watch hands that glow are examples of phosphorescence. A less obvious but more exact definition of the difference is that the amount of time phosphorescence continues after the material has been excited may change with temperature, but in fluorescence, this decay time does not change. Also, phosphorescence tends to occur at longer wavelengths than fluorescence.
Fluorescent dyes are included in many clothing detergents to make the clothes appear brighter. Because most organic materials fluoresce when excited by ultraviolet light, fluorescent spectroscopy is used to study organic molecules and atoms by the “fingerprint” of their light emissions: the wavelengths, lifetime, polarization, and brightness of their fluorescence.
Common uses of phosphors (phosphorescent materials) are in televisions and computer monitors: small dots of red, green, and blue phosphors are grouped together on the inner surface of a cathode-ray tube. When electrons generated in the back of the tube hit the phosphors, they absorb the energy and then emit light.
Other types of luminescence are defined by the source of the energy that causes the light emission. These include chemiluminescence, bioluminescence, electroluminescence, sonoluminescence, triboluminescence, and thermoluminescence.
Chemical reactions provide the energy to generate photons in chemiluminescence. These chemical reactions often involve oxygen.
Cyalume sticks are chemiluminescent: when you bend the flexible tube enough to break the barrier that separates two substances, the tube glows for several hours until the chemical reactions are completed. A method called enhanced chemiluminescent detection, developed by researchers in Paris, offers a non-radioactive way of keeping track of genes and is used in microchips that tracking the activity of genes.
KEY TERMS
Cathode ray tube or CRT —A display device that includes an electron gun to produce a stream of electrons, magnets to direct the electrons to specific spots on the opposite end of the tube, and phosphors on the receiving end that absorb the electrons and glow briefly.
Decay time —The length of time between when energy is introduced into a molecular system and when the system returns to equilibrium.
Fluorescence —Luminescence that stops within 10–5 seconds after the energy source is removed.
Incandescence —Light created by heating. Incandescence is not a luminescent process.
Phosphor —A material that absorbs energy over some period of time, then gives off light for a longer period. Commonly used in CRTs.
Wavelength —The distance between two consecutive crests or troughs in a wave.
Bioluminescence is a subset of chemiluminescence in which the chemical change occurs in living things such as fireflies. Such reactions are very efficient. They occur when a substance called a luciferin is oxidized with the aid of a catalyst called a luciferase.
Electroluminescent devices glow when a current is applied, although not because of chemical changes. In neon lamps, current causes electroluminescence of the gas in the tube. Many flat-panel displays such as in laptop computers are made of electroluminescent materials. (Although the most common type uses a fluorescent light to backlight a liquid-crystal mask.) Luminescence because of electron bombardment or an electrical field is related to electroluminescence. In fluorescent lamps, current ionizes the gas in the tube, and the ions activate a fluorescent coating on the inside of the lamps. The television example mentioned above is a case of cathodoluminescence, in which the phosphor is activated by a stream of electrons.
In sonoluminescence, the light is produced from energy provided by sound waves. This mechanism is fairly unusual. Recent research into sonoluminescence suggests that in some situations, sound may be concentrated to produce extremely high energies in small areas. This energy is dispelled as light, but it may be possible to harness that energy for other uses.
In triboluminescence, friction is responsible for the light. A famous example of this is the flash of light sometimes produced by crunching wintergreen flavor Life-Savers. (Do not confuse this with sparks given off by hitting flint and steel together. Those sparks, which can ignite a fire, are incandescent bits of metal.)
Thermoluminescence uses heat to release already-excited ions in a solid. When subjected to ultraviolet light, x rays, or gamma rays (all of which are energetic enough to separate electrons from atoms, thus forming ions), some electrons or ions become trapped in excited states. They are prevented from decaying back to a ground state because quantum mechanics forbids the transition. Heating allows the ion to rise to a higher state that can drop back to ground state by emitting light.
Thermoluminescence can be used to measure how much radiation a material has been subjected to. It is used for dosimeters by people working around x rays or radioactivity who need to know how much ionizing radiation they have been exposed to. Thermoluminescence is also used for radioactive dating of pottery shards and for finding radioactive minerals.
Resources
BOOKS
Harvey, E. Newton. A History of Luminescence: From the Earliest Times Until 1900. Mineola, NY: Dover Publications, 2005.
Pieribone, Vincent and David F. Gruber. Aglow in the Dark: The Revolutionary Science of Biofluorescence. Boston: Belknap Press, 2006.
Ronda, Cees. Luminescence: From Theory to Applications. New York: John Wiley & Sons, 2007
Shimomura, Osamu. Bioluminescence: Chemical Principle and Methods. Singapore: World Scientific Publishing Company, 2006.
Yvonne Carts-Powell
