Broom

views updated May 09 2018

Broom

Background

Brooms have been used for centuries to sweep up, in, and around the home and workplace. They may be made from a variety of materials, both man-made and natural. Man-made bristles are generally of extruded plastic and metal handles. Natural-material brooms may be constructed of a variety of materials, including brush, but generally include stiff grasses such as broomcorn and/or sotol fiber. Broomcom brooms have been made for at least 200 years and are considered superior brooms. Plastic brooms merely move dirt around, however, broomcom stalks actually absorb dirt and dust, wear extremely well, and are moisture-resistant. Broomcom brooms are the most expensive of the manufactured brooms.

Broomcom is actually a variety of upright grass of the species sorghum referred to as Sorghum vulgare, or S. bicolor variety technicum, belonging to the family Gramineae and cultivated for its stiff stems. Broom bristles are derived when these stiff, tasseled branches—that bear seeds on the ends—are harvested and dried. The seeds are edible, starchy, and high in carbohydrates. They can be used for human consumption (in cereals) or for animal feed. The tasseled stalks, used in the manufacture of brooms, can grow 2-8 ft (0.61-2.4 m) tall. Sorghum is especially valued in hot and arid climates due to its resistance to drought.

Mexico grows and processes most of the broomcom and sotol fiber used in American broom production. Sotol fiber, a yucca fiber, is sometimes used on the inside of the broom and is wrapped with more expensive broomcom, thus lowering the price of the natural-bristle broom.

The production of broomcom brooms is still largely a craft production with a single operator working quickly at a machine, making brooms by hand. There have been some changes in the manufacture of broomcom brooms within the last several decades, but those changes have been very minor. Essentially, the handcraft has changed little since mid-twentieth century.

Brooms were often used in matrimony rituals to symbolize a union.. Enslaved African-Americans married one another in a civil ceremony referred to as "jumping the broom" in which the couple would literally jump over a broom to signify matrimony. Today, African-Americans occasionally recreate this custom by jumping over a broom at weddings, using specially handmade and decorated brooms for this purpose. These brooms then become a centerpiece within the new household.

History

Ashes and dirt were moved around and out of the house using bundled branches and brush for centuries. Native grasses were dried and bundled together, often decoratively woven at the top or tied tightly with yarn or fabric to keep the brooms together. Southerners have used native sweet grass and other grasses for their long stalks with tasseled ends for broom bristle. The course of American broom history was altered in the late eighteenth century, when some say that in 1797 Levi Dickenson, a farmer from Hadley, Massachusetts, used a bundle of tasseled sorghum grass (also called broomcom) to make a broom for his wife. It is likely these early broomcom brooms were simply lashed or woven together, resulting in the fact that they often fell apart. Other experiments with attaching the circular bundles of broomcom led to wooden handles. By about 1810, wooden handles with holes drilled into them were used to lash the broomcom to the handle using wooden pegs.

Whether Levi Dickenson was the first American to use sorghum to make brooms is in contention. However, nearly all acknowledge that the United Society of Believers, familiarly called the Shakers, quickly moved into the broom-making business about 1798 by growing broomcom and making brooms. The Shakers' Watervliet, New York, community took the lead in manufacturing brooms, although nearly all the Shaker communities constructed and sold them throughout the century. The Shakers are credited with inventing the flat broom. They recorded that Theodore Bates of Watervliet examined the circular bundled broom and determined that flat brooms would move dust and dirt more efficiently. The bundles were put into a vice, flattened, and sewn in place.

The Shakers led the way in improving the broomcom broom. They appear to be the first to find that wire more effectively secured the broomcom to the wooden handle rather than tying or weaving. They developed treadle machinery to wind broomcorn around the handle while securing it tightly. They developed special vices to flatten the broom for sewing into the requisite flat shape. Still other machinery was devised to quickly separate the seeds of the broomcom from the tassel bristles. Using foot-powered machinery, the Shakers could make two dozen brooms per person per day—quite a feat for the early nineteenth century.

Today, the machinery is electrically powered. However, in even the largest American broom factory, the production of broomcom brooms is still remarkably a hand craft. (One factory foreman in a large broomcom factory says he can pick up a broom and tell who amongst his staff made it because each one is made according to the skills and preferences of the maker.) A single machine and operator sits at a machine and constructs a broom. The machines, and the methods, have not changed in over 40 years.

The most significant development in the history of the product resulted from the North American Free Trade Agreement (NAFTA) in 1994 when tariffs were lifted from broom-corn brooms imported from Mexico. Cheaper than American brooms (labor is cheaper and broomcorn is grown there in huge quantities), the Mexican-made broom importation obliterated many American broomcom manufacturers. American broomcom manufacturers pressed for more restrictive tariffs, but such tariffs were overruled. Today, there are only about 15 broomcorn manufacturers left in the United States.

Raw Materials

The material used is broomcom, which is shipped bundled in large bales. The bundles are grouped according to the length of the grass and color. Sotol fiber from the yucca plant may be used in cheaper broom-corn brooms. White metal wire, of approximately 18 gauge, is used to secure the broomcom and sotol to the handle. A small nail or two is used to secure the wire to the handle. The handles are generally of wood. Sometimes American hardwood is used, but more likely the wood used is ramin wood, an imported wood of dense, heavy, coarse grain. Thick twine is used to sew the brooms flat using a sewing machine. Finally, water is necessary in that the broomcom must be wetted completely in order to be worked.

The Manufacturing Process

It is important to note that brooms made from broomcorn are made at a station, using a single piece of machinery. Using this machine, brooms are largely still assembled by hand. The process described below is used by the largest manufacturer of brooms and the factory uses about 28 makers to produce 6,000 brooms per day.

  1. The raw material for the broom, the broomcorn, comes into the factory already processed and bundled. The bundles are sorted by length and are sorted by the color of the fiber. Bundles are grouped together in a bale weighing about 120 lb (54 kg). Broomcom must be wet in order to be worked effectively and must be quickly dunked in water before being delivered to the operator. Each bale is lifted with a crane and submerged in a tank of water for 10 seconds. The bundles are then removed from the water using the crane.
  2. Workers break apart the wet bales and separate the smaller bundles within the bales. The bundles are placed on racks and rolled to operators who sit at broom-manufacturing equipment.
  3. An operator sits at a broom-making machine and has the broomcom and solid handles there to work. An individual handle is picked up by the operator. The operator inserts a metal wire into a hole drilled near the bottom of the handle. Then, the insides are first applied to the broom. In this process, the lowest-grade grass is pressed around the wooden handle, forming the center of the broom. This thick bundle of grass is secured tightly to the handle using the wire attached to the handle through the hole.
  4. Then, the shoulders and sides of the broom are given shape as smaller bundles of lesser grade grasses are placed along each side of the center bundle of grass. This side corn is secured to the central bundle of grass using more tinned wire that is wrapped by hand tightly around the side corn as well as the central body of grass.
  5. Next, the grass is cut off in a straight line just above the wire by the operator using a knife.
  6. Over this foundation of lower-grade dbroomcom or other grasses is now added the outside of the broom, or the broomcom we see when we look at a broom. The hurl, the best grade of broomcom used in a broom, is attached to the broom. It is laid atop the center section and shoulders, completely covering it. The hurl is physically attached to the broom using the same piece of white metal wire used earlier in the process.
  7. The final construction step is referred to as the run down. The operator runs the wire that secures the hurl down to the handle and nails it off, thus securing the cut end to the wooden handle. The grasses and broom-corn are now completely secured to the broom.
  8. The brooms are now constructed but are not finished yet. In order to complete the broom, the broomcom must be dried out completely. The brooms are moved by rack or palette into a very large drying room that is thermostatically controlled. Depending on the weather, the brooms are left in this large, hot room for five to six hours. When instruments inside the room indicate that no more moisture is being released from the brooms, the heat kicks off and the broomcom has completely dried.
  9. The brooms are now seeded, meaning that cylinders roll vertically over the broomcom, thus removing all the seeds and small pieces of broomcorn not secured to the handle that will fall out quickly upon use.
  10. The seeded brooms are taken to sewing machine operators who run the brooms through a heavy-duty sewing machine with two needles that is threaded with thick twine. The brooms are put through the machine and the broom is flattened and its shape is maintained through the double, triple, or quadruple rows of sewing (depending on the machine and company) that holds the grasses tightly. It takes about 45 seconds to sew the brooms into a flat shape.
  11. The brooms are moved by cart to final finishing, where they are trimmed across the bottom so they are even, packaged, and sent for distribution.

Quality Control

Broomcom is carefully graded so that the manufacturer understands the quality of the product that is shipped in the bale. Broomcorn is categorized by length and by color, with the brown-red broomcorn considered inferior. Inferior broomcom may be used on the inside of the broom close to the handle and the operator ensures that the inferior product remains out of sight. Machinery must be in good shape as well. Each individual broom-making machine is maintained, and the craftsman at each machine knows instantly when the machine is amiss. Other machinery such as the hydrostatic dryers or the seed removers are carefully monitored to ensure they perform efficiently. However, it is the broom makers themselves who are the key to monitoring quality of broomcorn brooms. Because the manufacture is completed using one operator per station who works from beginning to end on the product, he or she is sees and handles the product for nearly the entire process (except the sewing process). Each operator can tell whether the product has gone awry and can set aside such a broom so that it will not make it to a retail outlet.

Byproducts/Waste

There is little waste as the processing of the broomcorn and sotol occurs in Mexico. However, there are still seeds to remove and the shorter grasses captured within a bundle of grass is hauled away immediately. These grasses and seeds can be a fire hazard and do not stay long in the factory. (Broomcom is a bit difficult to catch afire but once it begins burning it is difficult to stop.)

The Future

The broom model has changed little over the past 200 years. Today, there are brooms with synthetic fibers that attract dirt and dust. There are also brooms made of finer, polypropylene fibers with angled bristles. Smaller whisk brooms are also available as are brooms with easy to grip rubber handles. The Internet has brought broomcorn brooms to every home with easy ordering and delivery.

Where to Learn More

Books

Andrews, Edward Deming. The Community Industry of the Shakers. Albany, NY: The University of the State of New York, 1993.

Nylander, Jane. Our Own Snug Fireside. New Haven: Yale University Press, 1994.

Other

Broom Shop. http://www.broomshop.com (January 2001).

Organization of American States Website: NAFTA Dispute Settlement: Broomcorn Brooms. http:www.sie.oas.org (January 2001).

R.E. Caddy & Company, Inc. http://www.recaddy.com (January 2001).

NancyE.V.Bryk

Broom

views updated May 23 2018

BROOM

BROOM , the biblical rotem (Ar. ratam), the wild shrub Retam roetam, widespread in the deserts of Israel and in sandy regions. It produces a few leaves in the winter, which it sheds in the summer, its green stalks filling the function of the leaves in photosynthesis. According to R. Meir the shrub under which Hagar left her son Ishmael (Gen. 21:15) was the broom, "since it grows in the desert" (Gen. R. 53:13). Elijah lay down in the shade of a broom in the wilderness "a day's journey from Beer-sheba" (i Kings 19:3–5), "and he requested for himself that he might die"; and indeed it is difficult to find refuge from the powerful rays of the desert sun in the shade of this leafless bush. In the tents of Kedar they used "coals of rotem" for fuel and for fashioning arrows (Ps. 120:4–5). The roots are bitter but it is apparently possible to render them edible by roasting. Thus the hungry dwellers in the desert eat the saltwort (Heb. malu'aḥ, *Orach) "and the roots of the broom are their food" (Job 30:4; however, some translate laḥmam לַחְמָם, "their food" as "to warm themselves thereby" from חמם). According to the aggadah, the glowing embers of the broom have a remarkable characteristic: "For all embers are extinguished within [after they die down on the outside] but broom embers still burn within when extinguished on the outside" (Gen. R. 98:19). According to another aggadah coals of broom retain their heat for 12 months (bb 74b). Onkelos and the Vulgate translate the rotem by *juniper to whose embers Jerome attributes this quality of retaining their heat for 12 months. This identification is however wrong.

bibliography:

Loew, Flora, 2 (1924), 469–73; H.N. and A.L. Moldenke, Plants of the Bible (1952), 305; J. Feliks, Olam ha-Ẓome'aḥ ha-Mikra'i (19682), 130f.

[Jehuda Feliks]

broom

views updated May 21 2018

broom a sprig of this shrub (in Latin planta genista) was said to have been worn as a crest by Geoffrey of Anjou, and to be the origin of the name Plantagenet. The word is recorded from Old English (in the form brōm) and is of Germanic origin, ultimately related to bramble.

From late Middle English, broom has also meant a long-handled brush of bristles or twigs, used for sweeping; this is the emblem of St Martha, St Petronilla, an early Roman martyr whose fictional legend makes her the daughter of St Peter (see Peter1), and St Zita, a 13th-century Luccan serving-maid.



See also new brooms sweep clean, sweep of Chancery.

Broom

views updated May 09 2018

Broom

In Romania and Tuscany it was a folk belief that a broom laid beneath the pillow would keep witches and evil spirits away. Others suggested that witches and evil spirits could be kept at bay by two crossed brooms in front of a house door or cattle-shed. The British believed that if a girl should stride over a broom handle, she would be a mother before she was a wife. Other superstitions claimed that buying a broom in the month of May would sweep your friends away, hence it was unlucky to make brooms during May. Another popular belief was that a new broom should sweep something into the house before it swept dust out of the house.

broom

views updated Jun 08 2018

broom / broōm; broŏm/ • n. 1. a long-handled brush of bristles or twigs used for sweeping. 2. a shrub (genera Cytisus and Genista) of the pea family, with long, thin green stems and a profusion of flowers.

broom

views updated May 14 2018

broom Any of various deciduous shrubs of the pea family (Fabaceae/Leguminosae). They have yellow, purple or white flowers, usually in clusters. Many belong to the genus Genista, which gave its name to the Plantagenate kings of England (from the Latin Planta genista), who used the broom as their emblem.

broom

views updated Jun 08 2018

broom yellow-flowered shrub OE.; sweeping implement, orig. one of broom †wigs XV. OE. brōm, corr. to MLG. brām, OHG. brāmo, brāma (cf. G. brombeere blackberry), also MLG. brēme, brumme. Cf. BRAMBLE.