Composting

views updated

Composting


Composting is a fermentation process, the break down of organic material aided by an array of microorganisms , earthworms, and other insects in the presence of air and moisture. This process yields compost (residual organic material often referred to as humus ), ammonia, carbon dioxide , sulphur compounds, volatile organic acids, water vapor, and heat. Typically, the amount of compost produced is 40–60% of the volume of the original waste.

For the numerous organisms that contribute to the composting process to grow and function, they must have access to and synthesize components such as carbon , nitrogen , oxygen, hydrogen , inorganic salts, sulphur, phosphorus , and trace amounts of micronutrients. The key to initiating and maintaining the composting process is a carbon-to-nitrogen (C:N) ratio between 25:1 and 30:1. When C:N ratio is in excess of 30:1, the decomposition process is suppressed due to inadequate nitrogen limiting the evolution of bacteria essential to break the strong carbon bonds. A C:N ratio of less than 25:1 will produce rapid localized decomposition with excess nitrogen given off as ammonia, which is a source of offensive odors.

Attaining such a balance of ratio and range is possible because all organic material has a fixed C:N ratio in its tissue. For example, food waste has a C:N ratio of 15:1, sewage sludge has a C:N ratio of 16:1, grass clippings have a C:N ratio of 19:1, leaves have a C:N ratio of 60:1, paper has a C:N ratio of 200:1, and wood has a C:N ratio of 700:1. When these (and other) materials are mixed in the right proportions, they provide optimum C:N ratios for composting. Typically, nitrogen is the limiting component that is encountered in waste materials and, when insufficient nitrogen is present, the composting mixture can be augmented with agricultural fertilizers, such as urea or ammonia nitrate.

In addition to nutrients, the efficiency of the composting process depends on the organic material's size and surface characteristics. Small particles provide multi-faceted surfaces for microbial action. Size also influences porosity (crevices and cracks which can hold water) and permeability (circulation or movement of gases and moisture).

Moisture (water) is an essential element in the biological degradation process. A moisture level of 55–60% by weight is required for optimal microbial, nutrient , and air circulation. Below 50% moisture, the nutrients to sustain microbial activity become limited; above 70% moisture, air circulation is inhibited.

Air circulation controls the class of microorganisms that will predominate in the composting process: air-breathing microorganisms are collectively termed aerobic , while microorganisms that exist in the absence of air are called anaerobic . When anaerobic microorganisms prevail, the composting process is slow, and unpleasant-smelling ammonia or hydrogen sulfide is frequently generated. Aerobic microorganisms will quickly decompose organic material into its principal components of carbon dioxide, heat and water.

The role of acidity and alkalinity in the composting process depends upon the source of organic material and the predominant microorganisms. Anaerobic microorganisms generate acidic conditions which can be neutralized with the addition of lime. However, such adjustments must be done carefully or nitrogen imbalance will occur that can further inhibit biological activity and produce ammonia gas, with its associated unpleasant odor. Organic material with a balanced C:N ratio will initially produce acidic conditions, 6.0 on the pH scale. However, at the end of the process cycle, mature compost is alkaline, with a pH reading greater than 7.0 and less than 8.0.

The regulation and measurement of temperature is fundamental to achieving satisfactory processing of organic materials. However, the effect of ambient or surface temperatures on the process is limited to periods of intense cold when biological growth is dormant. Expeditious processing and reduction of herbicides, pathogens, and pesticides is achieved when internal temperatures in the compost pile are maintained at 120–140°F (55–l60°C). If the internal temperature is allowed to reach or exceed 150°F (65°C), biological activity is inhibited due to heat stress. As the nutrient content is depleted, the internal temperature decreases to 85°F (30°C) or less–one criteria for defining mature or stabilized compost.

Mature or stabilized compost has physical, chemical, and biological properties which offer a variety of attributes when applied to a host soil . For example, adding compost to barren or disturbed soils provides organic and microbial resources. The addition of compost to clay soils enhances the movement of air and moisture. The water retention capacity of sandy soil is enhanced by the addition of compost and erosion also is reduced. Soils improved by the addition of compost also display other characteristics such as enhanced retention and exchange of nutrients, improved seed germination, and better plant root penetration. Compost, however, has insufficient nitrogen, phosphorous, and potassium content to qualify as a fertilizer . The ultimate application or disposition of compost depends upon its quality, which is a function of the type of organic material and the method(s) employed to enhance or control processing.

Compost processing can be as simple as a plastic garbage bag filled with a mixture of plant waste that has had a couple of ounces of fertilizer, some lime, and sufficient water added to make the material moist. The bag is then sealed and set aside for about 12 months. Faster processing can be achieved with the use of a 55 gal (208 l) drum into which 0.5-in (1.3-cm) holes have been drilled for air circulation. Filled with the same mixture as the garbage bag and rotated at regular intervals, this method will produce compost in two to three months. A multi-compartmentalized container is faster and increases the diversity of materials which can be processed. However, including such items as fruit and vegetable scraps, meat and dairy products, cardboard cartons, and fabrics must be undertaken with caution because they attract and breed vermin.

Such methods are designed for individual use, especially by those who can no longer dispose of garden waste with their household waste . Similarly, commercial and government institutions employ natural (low), medium, and advanced technical composting methods, depending on their motivation, i.e., diminishing landfill capacity, availability of fiscal resources, and commitment to recycling . The simplest composting method currently employed by industry and municipalities entails dumping organic waste on a piece of land graded (sloped) to permit precipitation and leachate (excess moisture and organics from composting) to collect in a retention pond. The pond also serves as a source of moisture for the compost process and as a system where photosynthesis can oxidize the leachate. The organic material is placed in piles called windrows (a ridge pile with a half-cone at each end). The dimensions of a windrow are typically 10–12 ft (3–3.7 m) wide at the base and about 6 ft (1.8 m) high at the top of the ridge. The length is site specific. Windrows are constructed using a front-end loader. A mature compost will be available in 12–24 months, depending on various factors including the care with which the organic material was blended to obtain optimum C:N ratio; the supplementation of the material with additional nutrients; the frequency of aeration (mixing and turning); and the moisture content maintained.

Using the same site layout, the next step in mechanization is the use of windrow turners. These turners can be simple aeration machines or machines with the added ability to shred material into smaller particles, while injecting supplemental moisture and/or nutrients. Optimizing the capabilities of such equipment requires close attention to temperature variation within the windrows. Typically, the operator will use a temperature probe to determine when the temperature falls in the range of 100°F (37–38°C). The equipment will then fold the outer surface of the windrow inward, replenishing air and moisture, and mixing in unconsumed or supplemental nutrients. This promotes further decomposition, which is identified by a gradual rise in temperature. Sequential turning and mixing will continue until temperatures are uniformly diminished to levels below 85°F (30°C). This method produces a mature compost in four to eight months.

Two more technologically advanced composting methods are the in-vessel system and the forced-air system. Both are capable of processing the bulk of all solid and liquid municipal wastes. However, such flexibility imposes substantial capital, technical, and operational requirements. In forced air processing, organic material is placed on top of a series of perforated pipes attached to fans which can either blow air into, or draw air through the pile to control its temperature, oxygen, and carbon dioxide needs. This system is popular for its ability to process materials high in moisture and/or nitrogen content, such as yard wastes. Time to produce a mature compost is measured in days, depending on the class of organic material processed. During in-vessel processing, organic material is continuously fed into an inclined rotating cylinder, where the temperature, moisture, and nutrient air and gas levels are closely controlled to achieve degradation within 24–72 hours. The composted material is then screened to remove foreign or inert materials such as glass, plastics , and metals and is allowed to mature for 21 days.

[George M. Fell ]


RESOURCES

BOOKS


Appelhof, M. Worms Eat My Garbage. Kalamazoo, MI: Flower Press, 1982.

The Biocycle Guide to the Art and Science of Composting. Emmaus, PA: JG Press, 1991.

The Biocycle Guide to Yard Waste Composting. Emmaus, PA: JG Press, 1989.

The Rodale Book of Composting. Emmaus, PA: Rodale Press, 1992.


PERIODICALS

Kovacic, D. A., et al. "Compost: Brown Gold or Toxic Trouble?" Environmental Science and Technology 26 (January 1992): 38-41.

Lecard, M. "Urban Decay." Sierra 76 (September-October 1991): 27-8.

More From encyclopedia.com