Ferro Corporation

views updated May 23 2018

Ferro Corporation

1000 Lakeside Avenue
Cleveland, Ohio 44114-1183
U.S.A.
(216) 641-8580
Fax: (216) 696-6958

Public Company
Incorporated: 1919 as Ferro Enameling Company
Employees: 6,000
Sales: $1.10 billion
Stock Exchanges: Midwest Boston New York
SICs: 2816 Inorganic Pigments; 3299 Nonmetallic Mineral Products Nec; 3089 Plastics Products Nec; 2819 Industrial InOrganic Chemicals Nec; 2899 Chemicals and Chemical Preparations Nec; 2851 Paints, Varnishes, Lacquers, Enamels, and Allied Products; 3264 Porcelain Electrical Supplies; 2893 Printing Ink; 2865 Cyclic Organic Crudes and Intermediates and Organic Dyes and Pigments

Ferro Corporation is a leading worldwide producer of specialty coatings, colors, ceramics, plastics, and chemicals for a wide variety of markets, including: building and renovation, home appliances, household furnishings, leisure products, transportation, industrial products, and packaging. The company has manufacturing plants in 23 countries and marketing operations in more than 100 nations worldwide.

Ferro was founded in 1919 by Harry D. Cushman as the Ferro Enameling Company. Cushman had worked for the American Rolling Mill Co. (Armco) of Cleveland since the early 1900s when he and fellow employee Raymond L. Williams decided to strike out on their own with a porcelain enamel shop, making themselves president and vice president, respectively.

In the early 1920s enameling was based on the manufacture of frit, a glass compound. The business commenced in 1920 with an investment of $1,000. As a subcontractor, Ferro Enameling Company applied porcelain enamel finishes to component parts, then returned the parts to the client for assembly. In its first year of operation, Ferro produced 59,000 pounds of porcelain enamel.

During that first year, salesman Robert A. Weaver approached Harry Cushman with an unusual proposal. Weaver offered to provide marketing and other services through a separate company, and leave the technical aspects of the business to the original enterprise. He had been involved in sales and advertising with several porcelain enameling companies in the 1910s and, like his prospective clients, hoped to go into business for himself.

Cushman and Williams agreed to Weavers proposition, and in 1920 Weaver founded the Ferro Enamel & Supply Co. to sell and service Ferro Enameling Co. products. The two companies endured early financial problems but soon grew in the favorable economic climate of the 1920s.

By passing marketing responsibilities on to Weaver, Cushman was given more time to concentrate on the technical aspect of the enameling business. His early emphasis on technical research and development started a tradition of scientific inquiry at Ferro that would continue throughout the companys history and drive its growth and expansion. Cushmans emphasis on quality control gave birth to the companys logo in 1921. The Check-Mark-Within-a-Circle has evolved over the decades, but remained the trademark into the 1990s.

While Cushman concentrated on the technical aspects of the business, Robert Weaver formulated a new marketing plan that later would be known as systems marketing. He proposed that the company not limit its products to porcelain enamel frit, but also produce the tools customers needed to complete the enameling process.

Soon Ferro Enamel & Supply Co. was in the business of designing and manufacturing complete equipment for enameling, from furnaces to finishing. In 1926 the company formed an engineering division to handle this burgeoning business that grew with the expanding appliance industry. The divisions first technical achievement came in 1928 when Ferro patented the U-type continuous furnace, which soon became an industry standard.

In 1923 Weaver came up with another innovative marketing tool. He founded the industrys first trade journal, The Enamelist, to foster use of enamel coatings. The periodical featured advertising, news, and semi-technical pieces. It was emulated by competitors, and eventually evolved into The International Enamelist, reflecting Ferros global scope.

The companys first international expansion came in 1927 after a Ferro executive from Canada suggested that the company build a plant in his adopted homeland. In its first three years of operation, Ferro Enamels (Canada) Limited, Canadas first porcelain enamel supplier, imported the product from the United States. But by the end of the decade, the company opened a modest plant in Ottawa.

Ferro ventured across the Atlantic Ocean before the decades end, but the company took many factors into account before deciding on its overseas locations. At the time, long-distance communications still posed a problem. Political and currency stability and the initial investment were also considered before Ferro settled on England and Holland as subsidiary locations.

Despite the relatively high shipping costs associated with exporting, The Ferro Enameling Company (England) Limited was undertaken as strictly a marketing business in 1929. The company was established in a Wombourne warehouse about 120 miles from London. Ferro chose Rotterdam as its Holland site for production and distribution because of its access to fuel and raw materials, and for its situation on the largest port in continental Europe.

This first decade of growth ended with three events that shaped Ferros future: the decision to sell shares in Ferro Enameling Company on the American Stock Exchange and the October 1929 stock market crash that precipitated worldwide depression. The onslaught of the Great Depression motivated Ferro Enamel & Supply to merge with Ferro Enameling to form the Ferro Enameling Corporation in the spring of 1930. The company was struck another blow when Harry Cushman, recently named chairman of the new entity, died in May. Co-founder Raymond Williams replaced Cushman as chairman, and Robert Weaver was elected president.

In Weavers continuing quest to promote Ferros porcelain enameled products, he advanced the idea of an all-porcelain house in 1932. The companys first attempt at the concept featured porcelain enameled steel shingles on the outside and porcelain amenities inside. A second model, opened that same year, was subjected to various strength tests to illustrate the durability of Ferros products. Although the company would make forays into the residential building materials market in the 1940s and 1970s, the products did not catch on.

Despite the deepening recession, Ferro continued to expand in the 1930s. In 1933 the company acquired Allied Engineering Co. of Columbus, Ohio, and made it a second engineering division. Allied was a recognized leader in the design and manufacture of china, pottery, and tile kilns, having created the industrys first circular kiln.

Ferro dramatically expanded its international influence in the 1930s, establishing businesses in four countries within just two years. Ferro France, founded in 1934 about 150 miles from Paris, imported porcelain enamel frit from Ferro Holland for its first year in operation, then inaugurated a smelting facility the following year. Ferro Enamels (Australia) Ltd. in Victoria, Ferro Brazil in Sao Paulo, and Ferro Enamel S.A. (Argentina) were created in 1935 with the cooperation of American Rolling Mills Co., former employer of Ferros two founders.

As the world emerged from the Great Depression, Ferro expanded its operations in Britain and Holland with manufacturing facilities in England and enlargement of the Holland business. Ferro achieved 100 percent ownership of both the Holland and Canada enterprises in 1937, making the operations full-fledged subsidiaries.

Ferro augmented its product line and improved its original products near the end of the 1930s. The corporation purchased the Ceramic Supply Company (Cesco) in 1936 to supply kiln furniture and compliment its Allied Engineering Divisions kiln business. Ferros sales more than doubled over the course of this difficult decade, but net income grew by only 15 percent, from $390,000 to $457,500.

Ferro penetrated the paint industry in 1940 with the purchase of the Chase Drier & Chemical Co. in Bedford, just outside Cleveland. Later renamed Bedford Chemical, the company made metallic soaps that promoted the paint drying process. This timely acquisition initiated Ferros Chemical Division and provided inroads for wartime contracts.

As the United States entry into World War II grew imminent, the federal War Production Board prohibited all industrial production except war work. The ban included a Ferro mainstay, appliance manufacture, thereby threatening the companys future. Sales manager Dud Clawson earned the gratitude of his co-workers (and the presidency of Ferro in 1947) when he negotiated U.S. government contracts to manufacture incendiary products like thermit, an iron oxide-aluminum metal powder, and the newly-developed napalm, a liquid explosive. Over the course of the Great War, Ferro produced more than 61 million pounds of thermit and more than eight million pounds of napalm. The government even asked Ferro to take over a munitions plant in Marion, Ohio. Ferros unanticipated involvement in the war effort earned it five Army-Navy E awards.

The companys overseas outposts were more directly affected by the war. In Holland, Rotterdam was unmercifully shelled for four days in 1940. The city was occupied by Germany throughout most of the war, and inhabitants concerned themselves more with day-to-day survival than with frit. Similar conditions prevailed in occupied France. Ferro England supplied hospital ware and military canteens for the government.

After the war Ferro concentrated on reconstruction of war-damaged plants in Europe and expansion of other international interests. Canadian facilities were moved to Oakville, Ontario, and expanded by 1947. A new South African subsidiary, Ferro Enamels (Pty.) Ltd., imported ceramic products from Ferros England subsidiary.

Ferro also focused on meeting postwar demand for appliances in the United States. The company built two new frit manufacturing facilities in Nashville, Tennessee, and Los Angeles, California, to meet market requirements. In 1946 Ferro research perfected a new frit composition that soon became an industry standard.

Ferros Color Division grew rapidly in the postwar era. It had been established in 1939, but the work had been suspended during the war. The companys line of porcelain enamel was soon complemented with a series of ceramics pigments that catapulted Ferro to international leadership in the field. And recognizing the ascendancy of plastics, the company developed a third line of coloring agents engineered for that market. By 1947 the Color Division produced almost 5,000 different colors for the enamel, clayware and plastics fields.

Ferro focused on expanding its product base through technological research and acquisitions in the 1950s, and changed its name to Ferro Corporation in 1951 to reflect these new aspirations. When the U.S. Supreme Court eliminated the Owens-Corning Fiberglas Companys monopoly on the fiber glass industry that year, Ferro invested heavily in five domestic fiber glass plants. But the companys profit margins never met industry standards, and the operations were eventually divested in the late 1970s.

Ferros gel coat business fared much better than its fiber glass enterprise. This durable plastic coating developed at Ferros Los Angeles plant in 1953 was used to coat fiber glass boats, and soon became an important product line for the company.

Ferro applied two criteria to new acquisitions: each must have the potential for growth and competent management in place. During the 1950s two specialty ceramics companies were purchased that contributed to Ferros diversification goals: the Louthan Manufacturing Company in East Liverpool, Ohio (1954); and the American Clay Forming Company of Tyler, Texas (1957). In 1957 these two companies were organized with the Cesco Company as members of the Refractories Division.

Technological developments in the 1950s revolutionized Ferros primary business, porcelain enameling. After observing a customers experimental frit cooling process, Ferro engineers spent several years developing a procedure that used water-cooled steel rolls to cool molten frit. The new process was cheaper and cleaner than the centuries-old water cooling technique, and gave Ferro an advantage in the industry.

The Korean War precipitated another major development for Ferro when the company was asked to develop camouflage colors for the U.S. Army Engineer Corps. The Color Division maintained sole rights to produce camouflage colors for many years, and continued to hold more than three-fourths of the market through the 1980s.

Ferro expanded its international presence in the 1950s with the launch of international businesses in Mexico (1951), West Germany (1951), Italy (1958), Japan (1950), and Hong Kong (1953). After postwar reconstruction, Ferro Holland grew quickly, subsuming many competitors and launching many foreign subsidiaries. Ferro Holland also developed a technical advance in ceramic tile glaze that cut production costs in half. Ferro England and Ferro France expanded research facilities, entered the plastics field, and brought modern equipment on line.

The end of the decade was marked by the untimely death of president Dud Clawson. Over the course of the 1950s, Clawson had managed dramatic growth and expansion at Ferro: sales rose from $17 million to almost $64 million during that time. He was succeeded by Harry Marks, a 25-year Ferro veteran who would serve 17 more years as president, chairman, and CEO.

The company continued its acquisitions spree in the 1960s, adding nine domestic companies in the chemical and ceramics fields and making the largest purchase in its then-48-year history. Although some of the purchases were short-lived, others further expanded Ferros product line. The addition of Pittsburghs Vitro Company at the beginning of the decade eventually propelled Ferro to leadership in the glass color industry. Other acquisitions added coated fabrics, porous ceramic components, and specialty organic and inorganic chemicals to the conglomerates list of products.

In 1967 Ferro purchased the Electro Refractories and Abrasives Company and thereby entered the high-temperature ceramics industry. The massive acquisition took several months to negotiate, and brought such specialty products as cements, diffusing plates, and silicon carbide under Ferros growing product umbrella.

Technological developments in the 1960s were encouraged and consolidated with the construction of a Central Research Division where research on porcelain enamel, glaze, and pigments was undertaken. One of the centers innovations was the development of self-cleaning coating for household ovens, which was instantly popular.

Ferros international businesses in Japan, Holland, Canada, and Australia grew during the 1960s, and new extensions in Spain and India spread the companys global influence. The Holland subsidiarys reorganization of Ferros French business raised that operating unit to full ownership.

Ferros dramatic growth in the 1960s required a move into larger headquarters, and in 1969 the company moved to Clevelands new trade center at Erieview Plaza. Driven by acquisitions, the conglomerates sales more than doubled over the decade from $64 million to $148 million; net income kept up with that pace.

Despite economic fluctuations, a worldwide oil crisis, new environmental regulations, and shifts in top management, Ferro managed to record several accomplishments in the 1970s. Cliff Andrews was elected president and chief operating officer in 1972; he added CEO and chairman to his list of titles in 1975 and 1976. But within just six months of those promotions, Andrews was obliged to leave his post because of poor health. Ad Posnick ascended to the presidency and chief executive officership in 1976 and led the company throughout the 1980s and into the 1990s.

Ferro established manufacturing facilities in Portugal and Venezuela and expanded operations in Spain, West Germany, Japan, and Brazil. Ferro Canada reached $10 million in sales in 1973, and Ferro Holland grew so large and complex that a holding company, Ferro (Holland) B.V., was organized to manage those businesses. Political instability and anti-American terrorism plagued Ferros Argentinian subsidiary in the 1970s and forced the company to take extraordinary measures to protect its employees.

Technological developments were facilitated by a new corporate Technical Center that replaced the Central Research Division in 1970. Ferros Frit Division developed forehearth colors, enabling the company to produce small runs of colored glass by the early 1970s. VEDOC organic powder coatings developed in the 1970s helped Ferro capture a vital share of the paint and enamel market. VEDOC stood for versatile, everlasting, durable organic coating: the product line was used to finish appliances, automotive parts, and outdoor furniture.

Ferros Refractories Division grew in the 1970s with the acquisition of the Gem Manufacturing Company, and Ferro began manufacturing vacuum-formed products like catalytic converters, insulation, and refractories for the steel industry following the purchase of the Gemcolite and Therm-X companies. The acquisition of the Keil Chemical Company in 1974 expanded Ferros Chemical Group. At the end of the decade, Ferro purchased Transelco, Inc., a manufacturer of extremely specialized ceramic materials for the optical and electronics fields.

Having entered the plastics field just after World War II, Ferro expanded those operations into a full-fledged division in 1979 with the purchase of five plastic color businesses. The new Thermoplastic Colors and Compounds Division manufactured and marketed a comprehensive line of thermoplastic colorants.

By the end of the decade Ferro had evolved into a highly diversified worldwide conglomerate with sales of almost $600 million. But a deep recession in the early 1980s forced divestments and a mid-decade reorganization. The company identified thermoplastics as its new core business early in the decade and worked to bring those new operations to profitability. The new kid on the block, Ferro had competition in the industry that included established companies like General Electric, Imperial Chemical, Hercules, and Rhone-Poulenc. Occupied by the competition, Ferro was threatened with takeover by Crane Company, which acquired 22.4 percent of Ferros stock between 1980 and 1982. Ferro blocked the hostile action by repurchasing 1.73 million shares from Crane in late 1982.

In the latter half of the decade, plastics became Ferros fastest-growing business, providing up to a third of revenues. The company acquired plastics manufacturers in France, Portugal, and Great Britain, and established or expanded plastics operations in Holland, Canada, Spain, South Africa, and Brazil. Ferro added a plastics lab to its corporate Technical Center, and focused on the food packaging industry as a growth vehicle.

Ferros reorganization started with the development of a new mission statement to establish general goals for the corporation, but soon progressed to more concrete changes. Over the course of the decade, the corporation pared down its specialty ceramics division to concentrate on high-margin niche markets and sold its Allied Division and coated fabric business. In an effort to streamline operations, Ferro Europe was reorganized to include three core product lines: frit, pigments, and plastics.

Ferro Corporation moved into a new headquarters in time for its 70th anniversary in 1989. The renovated building featured Ferro architectural products, including ceramic tiles, engineered plastic materials, and powder coatings. The company entered the 1990s with a strong earnings growth of 24 percent annually from 1985 to 1989, surpassing $1 billion in worldwide sales by 1988.

But Ferro was not without problems. As the corporations share price plummeted from over $40 in 1989 to under $20 in 1990, takeover threats came from four directions. Scarce raw materials and low profit margins kept the plastics division hamstrung, and both sales and earnings dropped from 1990 to 1991.

That year, Albert C. Bersticker succeeded Ad Posnick as president and CEO. Even before advancing to Ferro leadership, Bersticker set out to enhance the companys positives and eliminate the negatives. His plan to restructure the company featured three primary parts: an emphasis on income over sales growth, concentration on core businesses, and reliance on Ferros long history of global, technological, and customer service advantages. The strategy equated into $60 million in capital investments, the elimination of 12 percent of the companys U.S., European, and Latin American salaried workforce, and increased corporate debt from about 20 percent up to 40 percent.

A number of changes occurred in the early 1990s. In March of 1992 Ferro sold its steel mill products business in Tyler, Texas, to Vesuvius USA Corporation; two months later, though, Ferros Plastic Colorants and Dispersions Division acquired ICI Americas, Inc.s PDI business unit, which produces polyester, epoxy, and urethane dispersions. A year later Ferro purchased Bayer S.p.A.s ceramic frit and color operations in Milan, Italy.

As the 1990s progressed, Ferro Corporation continued to find strength in its core businesses and international companies. The company continued to hold about 40 percent of the worlds steel and porcelain enamel markets. Foreign sales brought in more than half of the companys revenues and 75 percent of net earnings, and had profit margins of 5 percent of sales.

Principal Subsidiaries

Ferro France S.A.R.L; Eurostar S.A. (France); Ferro Chemicals S.A. (France); Ferro (Deutschland) G.m.b.H.; Ruhr-Pulverlack G.m.b.H. (Germany); Ferro (Great Britain) Ltd.; Ferro (Holland) B.V.; Ferro (Italia) S.R.L.; Metal Portuguesa S.A. (51%); Ferro Enamel Española, S.A.; Ege-Ferro Kimya A.S. (Turkey; 49.9%); Ferro Enamel Argentina, S.A.; Termoplasticos de Ingeniería S.A.; Ferro Enamel do Brasil I.C.L.; Ferro Enamel do Sul I.C.L.; Nutriplant I.C.L. (50%); Ferro Ecuatoriana S.A. (49%); Ferro Mexicana S.A. de C.V.; Ferro de Venezuela, C.A. (49%); Ferro Corporation (Australia) Pty. Ltd.; Ferro Industrial Products Ltd. (Canada); Ferro Far East, Ltd. (Hong Kong); Excel Frits and Colours Limited (India; 40%); P.T. Ferro Mas Dinamika (Indonesia; 55%); Ferro Enamels (Japan) Ltd. (10%); Nissan-Ferro Organic Chemical Co. Ltd. (Japan; 51%); NFE Co. Ltd. (Japan; 50%); Ferro Plastics (N.Z.) Ltd. (New Zealand); Ferro Industrial Products Limited (Taiwan, Republic of China); Ferro Toyo Co., Ltd. (Taiwan, R.O.C.; 60%); Ferro-TPI (Thailand) Co.Ltd. (44%); Ecotech Italia S.P.A. (Italy).

Further Reading

Bozsin, Michael A., Harold P. Connare, and Catherine N. Scott, Ferro: The First Seventy Years, 1919-1989, Cleveland: Ferro Corporation, 1990.

Kiesche, Elizabeth S. and Debbie Jackson, JV Talks Falter, Chemicalweek, January 29, 1992.

Lappen, Alyssa A., Someone Elses Turn?, Forbes, February 4, 1991, p. 94.

Marcial, Gene G., At Ferro, Its Move Over, Mario, Business Week, October 29, 1990, p. 92.

McConville, Daniel J., Despite a Trying Year, Ferro Keeps a Confident Outlook, Chemical Week, November 21, 1990, pp. 3637.

Moskal, Brian S., The Buck Doesnt Stop Here, Industry Week, July 15, 1991, pp. 2930.

April S. Dougal

Ferro Corporation

views updated Jun 11 2018

Ferro Corporation

1000 Lakeside Avenue
Cleveland, Ohio 44114-7000
U.S.A.
Telephone: (216) 641-8580
Fax: (216) 875-2705
Web site: http://www.ferro.com

Public Company
Incorporated:
1919 as Ferro Enameling Company
Employees: 7,481
Sales: $1.5 billion (2002)
Stock Exchanges: New York
Ticker Symbol: FOE
NAIC: 325131 Inorganic Dye and Pigment Manufacturing; 325998 All Other Miscellaneous Chemical Product and Preparation Manufacturing; 325510 Paint and Coating Manufacturing; 325910 Printing Ink Manufacturing

Ferro Corporation is a leading worldwide producer of coatings and performance chemicals used in the electronics, transportation, appliance, building and renovation, and household furnishing industries. The company has utilized an acquisition strategy for much of its history to promote growth and has operations in over 20 countriesits products are sold in over 100 countries across the globe. Established in 1919, Ferro operates as the largest supplier of ceramic glaze and porcelain enamel coatings.

Early History: 1920s

Ferro was founded in 1919 by Harry D. Cushman as the Ferro Enameling Company. Cushman had worked for the American Rolling Mill Co. (Armco) of Cleveland since the early 1900s when he and fellow employee Raymond L. Williams decided to strike out on their own with a porcelain enamel shop, making themselves president and vice-president, respectively.

In the early 1920s, enameling was based on the manufacture of frit, a glass compound. The business commenced in 1920 with an investment of $1,000. As a subcontractor, Ferro Enameling Company applied porcelain enamel finishes to component parts, then returned the parts to the client for assembly. In its first year of operation, Ferro produced 59,000 pounds of porcelain enamel.

During that first year, salesman Robert A. Weaver approached Harry Cushman with an unusual proposal. Weaver offered to provide marketing and other services through a separate company and leave the technical aspects of the business to the original enterprise. He had been involved in sales and advertising with several porcelain enameling companies in the 1910s and, like his prospective clients, hoped to go into business for himself.

Cushman and Williams agreed to Weavers proposition, and in 1920 Weaver founded the Ferro Enamel & Supply Co. to sell and service Ferro Enameling Co. products. The two companies endured early financial problems but soon grew in the favorable economic climate of the 1920s.

By passing marketing responsibilities on to Weaver, Cushman was given more time to concentrate on the technical aspect of the enameling business. His early emphasis on technical research and development started a tradition of scientific inquiry at Ferro that would continue throughout the companys history and drive its growth and expansion. Cushmans emphasis on quality control gave birth to the companys logo in 1921. The Check-Mark-Within-a-Circle has evolved over the decades but remained the trademark into the new century.

While Cushman concentrated on the technical aspects of the business, Robert Weaver formulated a new marketing plan that later would be known as systems marketing. He proposed that the company not limit its products to porcelain enamel frit, but also produce the tools customers needed to complete the enameling process.

Soon Ferro Enamel & Supply Co. was in the business of designing and manufacturing complete equipment for enameling, from furnaces to finishing. In 1926, the company formed an engineering division to handle this burgeoning business that grew with the expanding appliance industry. The divisions first technical achievement came in 1928 when Ferro patented the U-type continuous furnace, which soon became an industry Standard.

In 1923, Weaver came up with another innovative marketing tool. He founded the industrys first trade journal, The Enamelist, to foster use of enamel coatings. The periodical featured advertising, news, and semi-technical pieces. It was emulated by competitors and eventually evolved into The International Enamelist, reflecting Ferros global scope.

The companys first international expansion came in 1927 after a Ferro executive from Canada suggested that the company build a plant in his adopted homeland. In its first three years of operation, Ferro Enamels (Canada) Limited, Canadas first porcelain enamel supplier, imported the product from the United States. By the end of the decade, the company opened a modest plant in Ottawa.

Ferro ventured across the Atlantic Ocean before the decades end, but the company took many factors into account before deciding on its overseas locations. At the time, long-distance communications still posed a problem. Political and currency stability and the initial investment were also considered before Ferro settled on England and Holland as subsidiary locations.

Despite the relatively high shipping costs associated with exporting, The Ferro Enameling Company (England) Limited was undertaken as strictly a marketing business in 1929. The company was established in a Wombourne warehouse about 120 miles from London. Ferro chose Rotterdam as its Holland site for production and distribution because of its access to fuel and raw materials, and for its situation on the largest port in continental Europe.

This first decade of growth ended with three events that shaped Ferros future: the decision to sell shares in Ferro Enameling Company on the American Stock Exchange, the October 1929 stock market crash, and the worldwide economic depression of the 1930s. The onslaught of the Great Depression motivated Ferro Enamel & Supply to merge with Ferro Enameling to form the Ferro Enameling Corporation in the spring of 1930. The company was struck another blow when Harry Cush-man, recently named chairman of the new entity, died in May. Cofounder Raymond Williams replaced Cushman as chairman, and Robert Weaver was elected president.

Expansion in the 1930s

In Weavers continuing quest to promote Ferros porcelain enameled products, he advanced the idea of an all-porcelain house in 1932. The companys first attempt at the concept featured porcelain enameled steel shingles on the outside and porcelain amenities inside. A second model, opened that same year, was subjected to various strength tests to illustrate the durability of Ferros products. Although the company would make forays into the residential building materials market in the 1940s and 1970s, the products did not catch on.

Despite the deepening recession, Ferro continued to expand in the 1930s. In 1933, the company acquired Allied Engineering Co. of Columbus, Ohio, and made it a second engineering division. Allied was a recognized leader in the design and manufacture of china, pottery, and tile kilns, having created the industrys first circular kiln.

Ferro dramatically expanded its international influence in the 1930s, establishing businesses in four countries within just two years. Ferro France, founded in 1934 about 150 miles from Paris, imported porcelain enamel frit from Ferro Holland for its first year in operation, then inaugurated a smelting facility the following year. Ferro Enamels (Australia) Ltd. in Victoria, Ferro Brazil in Sao Paulo, and Ferro Enamel S.A. (Argentina) were created in 1935 with the cooperation of American Rolling Mills Co., former employer of Ferros two founders.

As the world emerged from the Great Depression, Ferro expanded its operations in Britain and Holland with manufacturing facilities in England and enlargement of the Holland business. Ferro achieved 100 percent ownership of both the Holland and Canada enterprises in 1937, making the operations full-fledged subsidiaries.

Ferro augmented its product line and improved its original products near the end of the 1930s. The corporation purchased the Ceramic Supply Company (Cesco) in 1936 to supply kiln furniture and complement its Allied Engineering Divisions kiln business. Ferros sales more than doubled over the course of this difficult decade, but net income grew by only 15 percent, from $390,000 to $457,500.

Ferro penetrated the paint industry in 1940 with the purchase of the Chase Drier & Chemical Co. in Bedford, just outside Cleveland. Later renamed Bedford Chemical, the company made metallic soaps that promoted the paint drying process. This timely acquisition initiated Ferros Chemical Division and provided inroads for wartime contracts.

Company Perspectives:

Our strategies are all aimed at creating profitable growth and expanding our market leadership. They are: to build a foundation for growth by strengthening our organization and continuously improving productivity; to generate growth by improving marketing capabilities and leveraging our technology; to pursue acquisitions and global expansion that will contribute to profitable growth; and to implement the Leadership Agendaa new way of managing Ferro s portfolio of businesses to maximize profitable revenue growth using more mature businesses to fund high-growth opportunities that represent Ferro s future.

Finding Opportunities in the 1940s and 1950s

As the United States entry into World War II grew imminent, the federal War Production Board prohibited all industrial production except war work. The ban included a Ferro mainstay, appliance manufacture, thereby threatening the companys future. Sales manager Dud Clawson earned the gratitude of his co-workers (and the presidency of Ferro in 1947) when he negotiated U.S. government contracts to manufacture incendiary products like thermit, an iron oxide-aluminum metal powder, and the newly-developed napalm, a liquid explosive. Over the course of the war, Ferro produced more than 61 million pounds of thermit and more than eight million pounds of napalm. The government even asked Ferro to take over a munitions plant in Marion, Ohio. Ferros unanticipated involvement in the war effort earned it five Army-Navy E awards.

The companys overseas outposts were more directly affected by the war. In Holland, Rotterdam was unmercifully shelled for four days in 1940. The city was occupied by Germany throughout most of the war, and inhabitants concerned themselves more with day-to-day survival than with frit. Similar conditions prevailed in occupied France. Ferro England supplied hospital ware and military canteens for the government.

After the war, Ferro concentrated on reconstruction of war-damaged plants in Europe and expansion of other international interests. Canadian facilities were moved to Oakville, Ontario, and expanded by 1947. A new South African subsidiary, Ferro Enamels (Pty.) Ltd., imported ceramic products from Ferros England subsidiary.

Ferro also focused on meeting postwar demand for appliances in the United States. The company built two new frit manufacturing facilities in Nashville, Tennessee, and Los Angeles, California, to meet market requirements. In 1946, Ferro research perfected a new frit composition that soon became an industry standard.

Ferros Color Division grew rapidly in the postwar era. It had been established in 1939, but the work had been suspended during the war. The companys line of porcelain enamel was soon complemented with a series of ceramics pigments that catapulted Ferro to international leadership in the field. Recognizing the ascendancy of plastics, the company developed a third line of coloring agents engineered for that market. By 1947, the Color Division produced almost 5,000 different colors for the enamel, clay ware, and plastics fields.

Ferro focused on expanding its product base through technological research and acquisitions in the 1950s and changed its name to Ferro Corporation in 1951 to reflect these new aspirations. When the U.S. Supreme Court eliminated the Owens-Corning Fiberglas Companys monopoly on the fiber glass industry that year, Ferro invested heavily in five domestic fiber glass plants. However, the companys profit margins never met industry standards, and the operations were eventually divested in the late 1970s.

Ferros gel coat business fared much better than its fiber glass enterprise. This durable plastic coating developed at Ferros Los Angeles plant in 1953 was used to coat fiber glass boats and soon became an important product line for the company.

Ferro applied two criteria to new acquisitions: each must have the potential for growth and competent management in place. During the 1950s, two specialty ceramics companies were purchased that contributed to Ferros diversification goals: the Louthan Manufacturing Company in East Liverpool, Ohio (1954) and the American Clay Forming Company of Tyler, Texas (1957). In 1957, these two companies were organized with the Cesco Company as members of the Refractories Division.

Technological developments in the 1950s revolutionized Ferros primary business, porcelain enameling. After observing a customers experimental frit cooling process, Ferro engineers spent several years developing a procedure that used water-cooled steel rolls to cool molten frit. The new process was cheaper and cleaner than the centuries-old water cooling technique and gave Ferro an advantage in the industry.

The Korean War precipitated another major development for Ferro when the company was asked to develop camouflage colors for the U.S. Army Engineer Corps. The Color Division maintained sole rights to produce camouflage colors for many years and continued to hold more than three-fourths of the market through the 1980s.

Ferro expanded its international presence in the 1950s with the launch of international businesses in Japan (1950), Mexico and West Germany (both 1951), Hong Kong (1953), and Italy (1958). After postwar reconstruction, Ferro Holland grew quickly, subsuming many competitors and launching many foreign subsidiaries. Ferro Holland also developed a technical advance in ceramic tile glaze that cut production costs in half. Ferro England and Ferro France expanded research facilities, entered the plastics field, and brought modern equipment on line.

The end of the decade was marked by the untimely death of president Dud Clawson. Over the course of the 1950s, Clawson had managed dramatic growth and expansion at Ferro: sales rose from $17 million to almost $64 million during that time. He was succeeded by Harry Marks, a 25-year Ferro veteran who would serve 17 more years as president, chairman, and CEO.

Key Dates:

1919:
Harry D. Cushman establishes the Ferro Enameling Company.
1920:
Robert A. Weaver creates the Ferro Enamel & Supply Co.
1930:
The two companies merge to form Ferro Enameling Corp.
1940:
Ferro enters the paint industry with the purchase of Chase Drier & Chemical Co.
1951:
The firm changes its name to Ferro Corporation.
1957:
The company merges Cesco, Louthan Manufacturing Co., and American Clay Forming Co. to create its Refractories Division.
1979:
Ferro buys five plastic color businesses; the Thermoplastic Colors and Compounds Division is established.
1982:
The company fends off a takeover attempt by Crane Co.
1995:
Synthetic Products Company is added to Ferros arsenal.
2001:
Ferro buys dmc2s electronics materials, ceramics, glass, and pigments business segments.

Acquisitions and International Growth Continue: 1960s1970s

The company continued its acquisitions spree in the 1960s, adding nine domestic companies in the chemical and ceramics fields and making the largest purchase in its then 48-year history. Although some of the purchases were short-lived, others further expanded Ferros product line. The addition of Pittsburghs Vitro Company at the beginning of the decade eventually propelled Ferro to leadership in the glass color industry. Other acquisitions added coated fabrics, porous ceramic components, and specialty organic and inorganic chemicals to the conglomerates list of products.

In 1967, Ferro purchased the Electro Refractories and Abrasives Company and thereby entered the high-temperature ceramics industry. The massive acquisition took several months to negotiate and brought such specialty products as cements, diffusing plates, and silicon carbide under Ferros growing product umbrella.

Technological developments in the 1960s were encouraged and consolidated with the construction of a Central Research Division where research on porcelain enamel, glaze, and pigments was undertaken. One of the centers innovations was the development of self-cleaning coating for household ovens, which was instantly popular.

Ferros international businesses in Japan, Holland, Canada, and Australia grew during the 1960s, and new extensions in Spain and India spread the companys global influence. The Holland subsidiarys reorganization of Ferros French business raised that operating unit to full ownership.

Ferros dramatic growth in the 1960s required a move into larger headquarters, and in 1969 the company moved to Clevelands new trade center at Erieview Plaza. Driven by acquisitions, the conglomerates sales more than doubled over the decade from $64 million to $148 million; net income kept up with that pace.

Despite economic fluctuations, a worldwide oil crisis, new environmental regulations, and shifts in top management, Ferro managed to record several accomplishments in the 1970s. Cliff Andrews was elected president and chief operating officer in 1972; he added CEO and chairman to his list of titles in 1975 and 1976. However, within just six months of those promotions, Andrews was obliged to leave his post because of poor health. Ad Posnick ascended to the presidency and chief executive officership in 1976 and led the company throughout the 1980s and into the 1990s.

Ferro established manufacturing facilities in Portugal and Venezuela and expanded operations in Spain, West Germany, Japan, and Brazil. Ferro Canada reached $10 million in sales in 1973, and Ferro Holland grew so large and complex that a holding company, Ferro (Holland) B.V., was organized to manage those businesses. Political instability and anti-American terrorism plagued Ferros Argentinian subsidiary in the 1970s and forced the company to take extraordinary measures to protect its employees.

Technological developments were facilitated by a new corporate Technical Center that replaced the Central Research Division in 1970. Ferros Frit Division developed forehearth colors, enabling the company to produce small runs of colored glass by the early 1970s. VEDOC organic powder coatings developed in the 1970s helped Ferro capture a vital share of the paint and enamel market. VEDOC stood for versatile, everlasting, durable organic coating: the product line was used to finish appliances, automotive parts, and outdoor furniture.

Ferros Refractories Division grew in the 1970s with the acquisition of the Gem Manufacturing Company, and Ferro began manufacturing vacuum-formed products like catalytic converters, insulation, and refractories for the steel industry following the purchase of the Gemcolite and Therm-X companies. The acquisition of the Keil Chemical Company in 1974 expanded Ferros Chemical Group. At the end of the decade, Ferro purchased Transelco, Inc., a manufacturer of extremely specialized ceramic materials for the optical and electronics fields.

Having entered the plastics field just after World War II, Ferro expanded those operations into a full-fledged division in 1979 with the purchase of five plastic color businesses. The new Thermoplastic Colors and Compounds Division manufactured and marketed a comprehensive line of thermoplastic colorants.

Reorganizing in the 1980s and Early 1990s

By the end of the decade, Ferro had evolved into a highly diversified worldwide conglomerate with sales of almost $600 million. However, a deep recession in the early 1980s forced divestments and a mid-decade reorganization. The company identified thermoplastics as its new core business early in the decade and worked to bring those new operations to profitability. The new kid on the block, Ferro had competition in the industry that included established companies like General Electric, Imperial Chemical, Hercules, and Rhone-Poulenc. Occupied by the competition, Ferro was threatened with takeover by Crane Company, which acquired 22.4 percent of Ferros stock between 1980 and 1982. Ferro blocked the hostile action by repurchasing 1.73 million shares from Crane in late 1982.

In the latter half of the decade, plastics became Ferros fastest-growing business, providing up to a third of revenues. The company acquired plastics manufacturers in France, Portugal, and Great Britain and established or expanded plastics operations in Holland, Canada, Spain, South Africa, and Brazil. Ferro added a plastics lab to its corporate Technical Center and focused on the food packaging industry as a growth vehicle.

Ferros reorganization started with the development of a new mission statement to establish general goals for the corporation but soon progressed to more concrete changes. Over the course of the decade, the corporation pared down its specialty ceramics division to concentrate on high-margin niche markets and sold its Allied Division and coated fabric business. In an effort to streamline operations, Ferro Europe was reorganized to include three core product lines: frit, pigments, and plastics.

Ferro Corporation moved into a new headquarters in time for its 70th anniversary in 1989. The renovated building featured Ferro architectural products, including ceramic tiles, engineered plastic materials, and powder coatings. The company entered the 1990s with a strong earnings growth of 24 percent annually from 1985 to 1989, surpassing $1 billion in worldwide sales by 1988.

Nevertheless, Ferro was not without problems. As the corporations share price plummeted from over $40 in 1989 to under $20 in 1990, takeover threats came from four directions. Scarce raw materials and low profit margins kept the plastics division hamstrung, and both sales and earnings dropped from 1990 to 1991.

That year, Albert C. Bersticker succeeded Ad Posnick as president and CEO. Even before advancing to Ferro leadership, Bersticker set out to enhance the companys positives and eliminate the negatives. His plan to restructure the company featured three primary parts: an emphasis on income over sales growth, concentration on core businesses, and reliance on Ferros long history of global, technological, and customer service advantages. The strategy equated into $60 million in capital investments, the elimination of 12 percent of the companys U.S., European, and Latin American salaried workforce, and increased corporate debt from about 20 percent up to 40 percent.

A number of changes occurred in the early 1990s. In March 1992, Ferro sold its steel mill products business in Tyler, Texas, to Vesuvius USA Corporation. In 1993, Ferros Plastic Colorants and Dispersions Division acquired Imperial Chemical Industries North American and European power coatings business, which produced polyester, epoxy, and urethane dispersions. That same year, Ferro purchased Bayer S.p.A.s ceramic frit and color operations in Milan, Italy.

As the 1990s progressed, Ferro Corporation continued to find strength in its core businesses and international companies. The company continued to hold about 40 percent of the worlds steel and porcelain enamel markets. Foreign sales, which had profit margins of 5 percent, brought in more than half of the companys revenues and 75 percent of net earnings.

Growing the Business: Mid-1990s and Beyond

After losing much of its focus on specialty ceramics in the late 1980s, Ferro made a resurgence in this sector during 1994 when in bought Diamonite Products, a unit owned by W.R. Grace & Company. The custom ceramic manufacturer added to Ferros growing line of high-performance specialty ceramics and fit nicely into the companys strategy of gaining a stronger foothold in that segment of the market. Ferro topped off its acquisition plan with the 1995 purchase of Synthetic Products Company. The dealone of the largest in its historynearly doubled of the size of its polymer additives product line. Three years later, the company secured a majority interest in a powder coatings manufacturer based in China.

During the latter half of the decade, Ferro launched another restructuring effort designed to secure profit growth and shore up sales. By this time, the specialty chemicals industry had become increasingly competitive due to a flurry of merger activity. Speculation arose the Ferro could become the target for another takeover attempt and company management acknowledged the difficult road that lie ahead for the company. really think Ferro has a major challenge, and that is to grow the business, claimed Berstickers successor Hector R. Ortino in a 1999 Chemical Week article. The CEO pointed to the importance of Ferros restructuring, stating that it was a matter of survival.

Indeed, as Ferros sales remained lackluster, Ortino set plans in motion to revitalize Ferros holdings. In 1999, the firm added electronics materials supplier Tam Ceramics Inc. and Advanced Polymer Compounding to its arsenal. Additional acquisitions followed during the early years of the new millennium. In 2000, the company snatched up the polymer modifiers business of Solutia Inc. and National Starch and Chemical Co.s EMCA-Remex Products division. Ferro then made a $525 million play for certain assets of OM Group Inc.s dmc2 division the following year. The deal included dmc2s electronics materials, ceramics, glass, and pigments business segments, all of which were deemed high growth areas by Ferro management.

By 2002, the company had strengthened its international position, revamped its production facilities, and bolstered its research and technology activities. Ferro sold off its powder coatings business unit that year and announced plans to divest its specialty ceramics business in May 2003 in an attempt to focus on three core segmentsElectronic Material Systems, Color and Glass Performance Materials, and Tile Coating Systems. While competition and faltering economies continued to challenge Ferros financial performance, the company appeared to be on the right track for future success.

Principal Subsidiaries

Ferro Electronic Materials Inc.; Ferro Pfanstiehl Laboratories Inc.; Ferro Pfanstiehl (Europe) Ltd. (United Kingdom); Ferro Glass & Color Corporation; Ferro Graphics Inc.; Ferro Colores S.A. de C.V. (Mexico); Ferro EM L.P.; Ferro Industrial Products Ltd. (Canada); Ferro B.V. (The Netherlands); Ferro (Belgium) S.p.r.l.; Ferro (Holland) B.V.; Ferro France S.a.R.L.; Ferro (Italia) S.R.L.; Ferro Industrias Químicas (Portugal) S.A.; Ferro Investments BV (The Netherlands); Ferro Toyo Co., Ltd. (China; 60%); Ferro Electronic Materials B.V. (The Netherlands); Ferro Holdings GmbH (Germany); Ferro Couleurs France S.A.; PT Ferro Ceramic Colors Indonesia (59%); Ferro Additives Asia (75.4%); dmc2 Italia SrL; Cerpart SrL (Italy); Cerdec Ceramics Italia SpA; Smaltochimica SrL (Italy; 40%); Degussa-Metais, Catalisadores e Ceramica, Lda (Portugal); Ferro Spain S.A.; Chilches Materials S.A. (Spain; 20%); Gardenia-Quimica S.A. (Spain; 48%); Kerajet S.A. (Spain; 25%); Ferro (Great Britain) Ltd.; Ferro Argentina S.A.; Minera Loma Blanca S.A. (Argentina); Procesadora de Boratos Argentinos S.A. (Argentina); Ferro Enamel do Brasil, Industria e Comercio Ltda; Ferro Mexicana S.A. de C.V.; Ferro de Venezuela C.A. (51%); Ferro Corporation (Australia) Pty. Ltd.; Ferro Far East, Ltd. (China); Ferro Suzhou Ceramic Color & Glaze Co. Ltd. (China); Ferro Taiwan Co. Ltd.; Ferro EMS Taiwan Ltd.; Ferro (Thailand) Co., Ltd. (49%); Ferro Cerdec (Thailand) Company Limited (49%); Ferro Ceramic Colors (Thailand) Co. Ltd. (51%); Ferro Electronic Materials Japan Co., Inc.; Ferro Japan K.K.; Ferro Performance Chemicals K.K. (Japan); DC-Ferro Co., Ltd. (Korea; 50%); PT Ferro Mas Dinamika (Indonesia; 95%); Ferro Enamels (Japan) Ltd. (10%); ESFEL Ecuatoriana S.A. (Ecuador; 19%).

Principal Competitors

Great Lakes Chemical Corporation; PPG Industries Inc.; Spartech Corporation.

Further Reading

Bozsin, Michael A., Harold P. Connare, and Catherine N. Scott, Ferro: The First Seventy Years, 19191989, Cleveland: Ferro Corporation, 1990.

Ferro Completes dmc2 Buy, Chemical Market Reporter, September 24, 2001, p. 30.

Ferro Corp. of Cleveland Has Completed the Sale of Its Powder Coatings Business Unit in Two Separate Transactions, Plastics Engineering, December 2002, p. 59.

Ferro Moves Forward in the Electronic Materials Market, Ceramic Industry, April 2001, p. 24.

Ferro Moves Forward with Geographic and Product Expansion, Chemical Market Reporter, December 11, 2000, p. 26.

Financial Group Buys Ferros Ceramics, Chemical Week, May 14, 2003, p. 10.

Kiesche, Elizabeth S. and Debbie Jackson, JV Talks Falter, Chemicalweek, January 29, 1992.

Lappen, Alyssa A., Someone Elses Turn?, Forbes, February 4, 1991, p. 94.

Marcial, Gene G., At Ferro, Its Move Over, Mario, Business Week, October 29, 1990, p. 92.

McConville, Daniel J., Despite a Trying Year, Ferro Keeps a Confident Outlook, Chemical Week, November 21, 1990, pp. 3637.

Moskal, Brian S., The Buck Doesnt Stop Here, Industry Week, July 15, 1991, pp. 2930.

Schmitt, Bill, Ferros Challenge Pulling Out All the Stops for Growth, Chemical Week, June 16, 1999, p. 23.

April S. Dougal

update: Christina M. Stansell