Pressure
Pressure
The kinetic molecular theory of gases and pressure
Atmospheric pressure and common measuring units for pressure
Pressure is a physical force exerted over a surface. Specifically, pressure (p) is defined as force (F) divided by unit area (A): p = F/A. When expressed relative to a pure vacuum, this quotient is referred to as absolute pressure. When referred to relative to atmospheric pressure it is called gauge pressure. Pressure is an important concept in many chemical and physical processes. For example, many types of reactor vessels and boilers must be monitored to ensure they do not exceed specific pressure limits, lest they rupture. In atmospheric science, an understanding of air pressure, also known as barometric pressure, is critical for making weather predictions. Acrobats and cheerleaders sometimes stand on each other’s shoulders to form a human tower. Even with perfect balance, there is a limit to how high such a tower can be built. Ultimately, the ability of the bottom person to bear the pressure, caused by the weight of all the people stacked above, is the limiting factor. Pressure, then, is the amount of force applied on a given area.
In this last example, increasing the number of people in the tower increases the amount of force applied to the shoulder area, which in turn causes the bottom person to be under greater pressure. However, pressure can also be increased without changing the amount of applied force. If the person standing directly above were to stand on one foot, thereby shifting all the weight onto a smaller area, the bottom person would feel increased pressure on that burdened shoulder.
Turning a nail upside down and driving its large, flat head through the wood by hammering its point, is a more difficult task than conventional nailing. Even if you were able to hammer the point with the same force, the flat head of the nail would spread this force over a relatively large surface area. As a result, there might not be enough pressure on the surface of the wood to cause penetration.
A force exerted over a small area causes more pressure than the same force applied over a large area. This principle explains why karate experts use the side of the hand when breaking a board, instead of the full palm which has more surface and would apply less pressure to the wood.
Similarly, a force exerted over a large area causes less pressure than the same force applied over a small area. This explains why it is possible to walk on top of deep snow with large, flat snowshoes when ordinary boots would cause a person to sink.
History of measuring devices
Historically, pressure has been measured with gauges that monitor the displacement of a mechanical element. One of the earliest measuring tools was a liquid-filled tube known as a manometer. Manometers were commonly used by scientists in the 1700 sand 1800s and are still used today to calibrate other pressure gauges. A manometer consists of a cylindrical glass U-shaped tube that is partially filled with liquid. One end of the tube is exposed to the process that is generating pressure; the other end may be sealed or left open depending on the design of the instrument. The pressure exerts a force on the surface of the liquid and causes it to move a specific distance that is proportional to the magnitude of the force. The pressure differential can be measured by comparing the height of the liquid to calibrated marks on the side of the tube. Another type of manometer is the inverted bell-type instrument that consists of two inverted U-shaped tubes, or bells, mounted on a balance beam. Each of these bells is located over a pressure inlet tube in such a way that the bell that is subjected to the highest pressure will rise. This type of apparatus is used to measure very small pressure changes such as those found in drying appliances like conveyor dryers and kilns.
Another type of pressure-sensing element is the Bourdon tube, which is a flexible tube made from steel, beryllium, copper, and other special alloys. The tube, which is flattened slightly and sealed on one end, is formed into a coil. When the open end is exposed to pressure, the tube uncoils to a degree that corresponds to the magnitude of the pressure. Positive pressure causes the tube to expand and a vacuum (negative pressure as compared to air pressure) causes it to contract. As the coil moves, it displaces a needle or other indicator that points along a pre-calibrated scale to give the pressure measurement. Bourdon tubes have the advantage of being low cost, simply designed, and useful for measuring both high and low pressure. They also have several disadvantages: they are not extremely accurate at low pressures, the mechanical linkage to the indicator needle may require amplification to give a meaningful reading, and process materials may accumulate inside the tube since one end is sealed.
Other important mechanical pressure sensors include the bellows and diaphragm type elements. The bellows employs a coiled spring instead of a coiled tube as the responsive element. When exposed to pressure, the spring stretches and moves a needle on a measuring gauge. The diaphragm is a flexible disk made of sheet metal with ridges carved into it. When the disk is exposed to pressure, it deforms to one side or the other, depending on which side is exposed to the higher pressure. The disks are very sensitive to small changes in pressure and therefore are useful in low pressure measurements as low as 13 Pa (0.1 torr).
Today, mechanical pressure devices have been supplemented with electrical sensors and transmitters. Certain devices, like piezoelectric crystals, may directly register pressure changes. These crystals operate on the principle that certain quartz compounds can be cut and aligned in such a way that they will trigger a small electric current when pressure is applied to them. Other electronic sensing devices depend on a mechanical sensor like a Bourdon tube or a diaphragm to register a change in pressure, and then they use electronic components to amplify and transmit the signal. The mechanical element transmits the pressure change to the magnetic coil of a transformer, which in turn translates the pressure to an electronic signal that can be relayed to a variety of output devices. Examples of this type of gauge include strain gauges, which measure the change in electrical resistance of a metal wire exposed to pressure via a mechanical sensor such as a bourdon tube or a bellows, and capacitive pressure transducers that register changes in capacitance when an elastic element is displaced by pressure.
The kinetic molecular theory of gases and pressure
According to the kinetic theory, gas, like all matter, is composed of many small, invisible particles that are in constant motion. In a child’s toy balloon, the amount of particle motion depends on the temperature of the gas trapped inside. The collision of the air particles with the walls of the balloon, accounts for the pressure.
Imagine a glass jar containing a few steel ball bearings. If one were to shake the jar, the steel balls would crash into the walls, and the sum of their forces would exert a pressure that might be enough to break the glass. Pressure depends on the total number of collisions and the intensity of the force with which each steel ball hits the glass. Both factors can be increased by shaking the jar more violently or in the case of the toy balloon, by increasing the temperature of the air trapped inside.
Atmospheric pressure and common measuring units for pressure
As humans living on the surface of Earth, people dwell at the bottom of an ocean of air. Each person supports on his or her shoulders the pressure caused by the weight of an air column that extends out to interstellar space.
Hold out the palm of a hand. Its area is approximately 20 sq in (120 sq cm) and the weight of the air resting upon it is nearly 300 lb (136 kg). Yet with all this weight, the hand is not crushed. This is because human bodies are used to living under such pressures. The liquids and solids inside the body grow to exert an equal pressure from the inside.
Air particles are constantly hitting every part of human bodies and the pressure they cause is known as atmospheric pressure. At high altitudes, such as one would find in places like Mexico City, Mexico, or Aspen, Colorado, there is less air above and, therefore, less atmospheric pressure. Breathing becomes more difficult, but throwing a baseball for distance is easier because there is less air resistance experienced by the moving baseball.
The barometer, invented by Italian physicist Evangelista Torricelli (1608–1647) in 1643, was the first instrument built to measure the pressure of the gases in Earth’s atmosphere. (The non-SI unit of pressure, torr, was named after Torricelli.) It consisted of a long glass tube closed at one end, filled with liquid mercury, and inverted into a dish of more mercury.
With this instrument, it has been observed that at sea level, atmospheric pressure can support the weight of about 760 mm of Hg (mercury). The exact figure depends on such things as weather conditions.
One standard atmosphere (1 atm) of pressure is the pressure exerted by a column of mercury that is 760 mm high at a temperature of 32°F (0°C). In the universe, pressure varies from very high pressures
KEY TERMS
Atmospheric pressure— Earth’s gravitational force pulls the surrounding air towards Earth. The force created by this action causes atmospheric pressure.
Kinetic molecular theory— The theory that explains the behavior of matter in terms of the motion of the particles that make it up.
Newton— The SI unit of force. One newton is roughly the force exerted by Earth on a 0.1 kg mass. This is about equal to the force exerted upward by the human hand when supporting a medium sized apple.
SI system— An abbreviation for Le Système International d’Unités, a system of weights and measures adopted in 1960 by the General Conference on Weights and Measures.
found the center of stars and other massive bodies to about one atmosphere on Earth’s surface and to approximately zero in the vacuum of outer space.
The pascal is the SI (International System of Units) unit of pressure. One pascal is equal to the force of one newton applied to a surface whose area is equal to one squared meter, 1.0 Pa = 1.0 N / m2. One atmosphere of pressure is equal to approximately 101.3 KPa.
Pressure in liquids
According to the kinetic theory, liquids are also composed of many small particles, but in contrast to gases where the particles are very far apart, liquid particles are often touching.
Liquid water is much more dense than air, and one liter of it contains many more particles and much more mass than an equivalent volume of air. When a swimmer dives into a lake, the person can feel the pressure of the water above even if just a few meters below the surface because the body is supporting a lot of weight. Doubling the depth below the surface causes the pressure on the human body to also double.
Fill an empty juice can with water and put two holes down one side. Place one hole near the top of the can and one near the bottom. The water coming out of the bottom hole will shoot out much further than the water escaping from the hole near the top. This is because the water at the bottom of the can is supporting the weight of the water column above it and so it is under greater pressure.
Lou D’ Amore
