Minerals
Minerals
In ordinary usage, minerals are the natural, non-living materials that compose rocks and are mined from Earth . Examples are metals, gemstones, clays, and ores.
The scientific definition of a mineral is more limited. To be considered a mineral, a substance must be solid under ordinary conditions, thus excluding petroleum and water . Minerals must be single, homogeneous (uniform) substances. Therefore quartz is a mineral, but rocks such as granite, which contain quartz mixed together with other minerals, are not considered minerals. Minerals must have definite chemical formulas, allowing only slight variations. Therefore, a sample of a particular mineral will have essentially the same composition no matter where it is from—Earth, the moon , or beyond. Minerals must be of nonbiological, or inorganic, origin, which excludes coal and peat. Finally, the atoms of which minerals are made must be arranged in orderly rows and stacks; that is, minerals must be made of crystals. Thus, to summarize the scientific definition, a mineral is a naturally occurring, inorganic, homogenous solid with a definite range of chemical composition and an ordered atomic arrangement.
With these restrictions, almost 4,000 different minerals are known, with several dozen new minerals identified each year. Every mineral possesses a combination of chemical composition and crystal structure that makes it unique, and by which it is classified (grouped with similar minerals) and identified. These minerals make up the solid Earth, the moon, and even meteorites. However, only 20 or so minerals compose the bulk of Earth's crust, that is, the part of the solid Earth accessible to human beings, extending from the surface downward to a maximum depth of about 55 mi (90 km). These minerals are often called the "rock-forming" minerals.
Chemical bonding and crystal structure
Mineralogists group minerals according to the chemical elements they contain. Elements are substances that cannot be broken down into simpler substances through chemical means. Over 100 of these are known, of which 88 occur naturally. However, most occur only in extremely small traces. Only ten elements account for nearly 99% of the weight of Earth's crust. Oxygen is the most plentiful element, accounting for 49.2% of the weight of Earth's crust. Next is silicon, which accounts for 25.7% of its weight. Table 1 lists the 10 most abundant elements in Earth's crust. Most minerals are compounds; that is, they contain two or more elements.
Chemical bonding
In molecules, elements are not merely mixed together, but are joined by chemical bonds. Chemical bonds in minerals are of four types: covalent, ionic, metallic, or Van der Waals, with covalent and ionic bonds most common. Two or more of these bond types can and do coexist in most minerals.
Covalent bonds are very strong bonds formed when atoms share electrons with neighboring atoms. Sulfur , and both of carbon's natural forms, graphite and diamond , are covalently-bonded minerals. So is quartz, which contains only silicon and oxygen.
Ionic bonds are strong bonds formed when electrons are transferred from one element to another. Since electrons carry a negative electrostatic charge, the element that acquires extra electrons becomes a negatively charged ion, an anion . The element that gave off the electron becomes a positively charged ion, a cation . The attraction between opposite charges binds anions and cations together in ionic compounds. Most metals (the
| Element | % weight of earth's crust |
| oxygen | 49.2 |
| silicon | 25.7 |
| aluminum | 7.5 |
| iron | 4.7 |
| calcium | 3.4 |
| sodium | 2.6 |
| potassium | 2.4 |
| magnesium | 1.9 |
| hydrogen | 0.87 |
| titanium | 0.58 |
elements iron , nickel, lead , aluminum , etc.) exist in nature as cations, rather than as electrically neutral atoms. Their mineral compounds are, therefore, usually ionic. This is true whether they are joined with one non-metal, as in oxides (oxygen), or with two, as in sulfates (sulfur and oxygen) and carbonates (carbon and oxygen).
Metallic bonds are generally weaker than either covalent or ionic bonds, which explains why metallically bonded minerals (true metals), like silver, gold, and copper , can be worked—beaten into flat sheets, or drawn into thin wires. In metallic bonds, electrons move about the crystal constantly flowing between adjacent atoms, redistributing their charge. Because of this flow of electrons, true metals are also good electrical conductors.
Van der Waals bonds are very weak bonds formed by residual charges from the other types of chemical bonds. Graphite is probably the best example of the nature of Van der Waals bonds. The atoms in graphite's carbon layers are covalently bonded, but a weak residual charge attracts the layers to one another. Van der Waals bonds make graphite a very soft mineral, excellent for use in pencil lead.
Crystal structure
The faces and angles of natural crystals result from the orderly arrangements of the atoms and molecules that make up a crystal. The relation between crystal shape and microscopic structure was suggested in the seventeenth century by Robert Hooke and Christian Huygens. It was confirmed in the twentieth century with the development of x-ray diffraction , a technique that uses x rays to examine the atomic structures of materials.
In modern terms, a solid substance is considered to be crystalline if its atoms or molecules are arranged in an orderly pattern that repeats at regular intervals. Therefore metals are crystalline, although the individual crystals making up a lump of gold are too small to see with the naked eye . By contrast, atoms making up glass do not have any orderly atomic arrangement. Therefore, glass, even it if is carved into the shape of a crystal, is not a crystalline material. Natural glasses such as obsidian (volcanic glass) are not technically minerals. Non-crystalline solids are called amorphous (without form).
Although there are thousands of different minerals, the shapes of their crystals can be described using just six basic geometric forms. These are called crystal systems. To determine what crystal system a mineral belongs to, it is nesessary to obtain a well-formed specimen, then observe the number and shape of the faces and the angles at which they meet. This task may be complicated by the fact that each crystal system includes several different forms, and a single crystal may combine several forms in its shape.
For example, consider the isometric system. This is the most symmetrical system, meaning that it has the greatest amount of "sameness" in its faces and angles. In fact, the basic geometric shape of the isometric system is a cube, having all sides of equal length and with all angles equal to 90°. Halite crystals, which are cubic, are easily recognized as belonging to the isometric system. However, 15 forms are possible within the isometric system. Isometric mineral crystals include the octahedral (eight-sided) spinels, and the dodecahedral (12-sided) garnets. A single crystal combining several forms can look almost spherical.
Mineral groups
Naming mineral groups
Anions, because of their extra electrons, tend to be much larger than cations. Ionic crystals therefore are
| Group and Constituent Elements | Mineral | Other Elements | Important or Representative Uses |
| only a few minerals, known as native elements, contain atoms of just a single element. | |||
| NATIVE ELEMENTS | Graphite | carbon | PENCIL "lead", LUBRICANT |
| Sulfur | sulfur | SULFURIC ACID, MATCH heads | |
| Silver | silver | PHOTOGRAPHY, JEWELRY | |
| SILICATES Silicon and Oxygen | Asbestos | magnesium | FLAME-PROOF fabric |
| Kaolinite | aluminum, hydrogen | clay for PORCELAIN, GLOSSY COATING for paper | |
| Muscovite (Mica) | potassium, aluminum, hydrogen | electric and heat INSULATION, decorative "GLITTER" | |
| Quartz sand | — | main ingredient in GLASS | |
| Talc | magnesium | COSMETICS | |
| OXIDES Oxygen | Hematite | iron | ore of iron, IRON and STEEL |
| Corundum | aluminum | GRINDING tools, Gems (ruby, sapphire) | |
| SULFIDES Sulfur | Pyrite | iron | ore, source of SULFUR, "marcasite" JEWELRY |
| Galena | lead | ore of LEAD | |
| HALIDES Halogens | Halite | sodium, chlorine | TABLE SALT, source of sodium for LYE, improves workability of molten GLASS |
| SULFATES Sulfur and Oxygen | Gypsum | calcium, hydrogen | PLASTER |
| Barite | barium | LUBRICANT for oil well drilling | |
| Group and Constituent Elements | Mineral | Other Elements | Important or Representative Uses |
| PHOSPHATES Phosphorus and Oxygen | Apatite | calcium, fluorine, hydrogen | source of phosphorus for FERTILIZER |
| CARBONATES Carbon and Oxygen | Trona | sodium, hydrogen | source ofsodium added to GLASS to improve workability melt |
| BORATES Boron and Oxygen | Borax | sodium, boron, hydrogen | CLEANSER, source of element BORON to improve heat resistance of GLASS |
built mainly of stacks of anions, with the much smaller cations filling spaces between them. Minerals more closely resemble each other in structure or behavior if minerals with the same anions (rather than cations) are compared. That is why minerals are generally grouped according to their anions, even if the cations may be of greater practical interest. For example, ore minerals are mined for the metals (cations) they contain, which can be changed from ions to neutral atoms of pure metal by a chemical process called smelting. Nevertheless, ore minerals (for example, oxides or sulfides) are grouped according to their non-metal elements.
Silicate minerals and the role of structure
Oxygen and silicon together make up almost three fourths of the mass of Earth's crust. The silicate minerals, a group containing silicon and oxygen atoms, are the most abundant minerals and are the major component of nearly every kind of rock. Silicate compounds make up over 90% of the weight of Earth's crust. Most silicate minerals contain other elements in their formulas; therefore, there is a great variety of silicate minerals. In some rocks such as granite, the different silicate minerals can be seen as the small interlocking crystals of various colors. In other rocks, the mineral grains may be too small to distinguish, but they are usually silicates.
Regardless of composition, all silicates have the same basic building unit, the silica tetrahedron . This consists of a silicon atom bound covalently to four oxygen atoms. The oxygen atoms occupy the corners of a geometrical shape called a tetrahedron. The silicon atom is at its center. The entire unit bears a negative electrical charge, enabling it to form compounds with cations.
Silica tetrahedra can join together by sharing oxygen atoms. The simplest result is two tetrahedra joined at one point or six tetrahedra forming a ring. Ribbons or sheets of silica tetrahedra can be millions of units long. If all four oxygen atoms are shared with neighbors, the tetrahedra form rigid networks that extend over the entire crystal. Such large silicates are inorganic polymers, large molecules built up of a great many similar small units. (The only other element known to form polymers is carbon, and carbon-based polymers are the basis of living things.) The arrangements of tetrahedra affect the properties of the silicate minerals. Garnets are very dense and hard, because their tetrahedra stand alone, bound by strong ionic charge to nearby cations. Beryl forms long, six-sided crystals, which may be colored by traces of metal to form precious emeralds and aquamarines. On the atomic level, beryl contains rings of six tetrahedra, the rings stacked one upon the other with their holes aligned. In muscovite, the tetrahedra are arranged in sheets, with alternating layers of aluminum and potassium atoms between them. The result is flat, flaky crystals, which can easily be separated by hand.
Non-silicate minerals
The so-called non-silicate minerals consist of a variety of different mineral groups each named for a particular anion. Only a few of these minerals contribute much volume to Earth's crust, but many of them are very important minerals for manufacturing and other industrial uses. Most mineralogists recognize ten or so major non-silicate groups and a variable number of lesser groups. Table 2 lists several of the major non-silicate groups.
Native elements
A few minerals, called native elements, contain only one element. These include the so-called native metals, gold, silver and copper, which occur in lumps, veins , or flakes scattered in rocks. Diamond and graphite are both naturally occurring forms of pure carbon. Sulfur, a yellow non-metal, is sometimes found pure in underground deposits formed by hot springs. Although not common, these minerals are economically important.
Physical traits and mineral identification
Despite their great variety and complexity, an unknown mineral sample can often be identified by observing or testing for a few simple physical traits. A miner al's physical traits are a direct result of its chemical composition and crystal form. Therefore, if enough physical traits are recognized, any mineral can be identified. These traits include hardness, color , streak, luster, breakage or cleavage, specific gravity, and other properties. The results of tests are compared with tables of known minerals until a match is found.
Hardness
A mineral's hardness is defined as its ability to scratch another mineral. This is usually measured using a comparative scale devised about 200 years ago by Friedrich Mohs. The Mohs scale lists ten common minerals, assigning to each a hardness from 1 (talc) to 10 (diamond). A mineral can scratch all those minerals having a lower Mohs hardness number. For example, calcite (hardness three) can scratch gypsum (hardness two) and talc (hardness one), but it cannot scratch fluorite (hardness four).
Color and streak
Although some minerals can be identified by their color, this property can be misleading because mineral color is often affected by traces of impurities. Streak, however, is a very reliable identifying feature. Streak refers to the color of the powder produced when one mineral is scratched by another, harder mineral. Fluorite, for example, comes in a great range of colors, yet its streak is always white.
Luster
Luster refers to a mineral's appearance when light reflects off its surface. There are various kinds of luster, all having descriptive names. Thus, metals have a metallic luster, quartz has a vitreous, or glassy luster, and chalk has a dull, or earthy luster.
Cleavage and fracture
Some minerals, when struck with force , will cleanly break parallel to planes of weakness in their atomic structure. This breakage is called cleavage. Muscovite cleaves in one direction only, producing thin flat sheets. Halite cleaves in three directions, all perpendicular to each other, forming cubes. A mineral's cleavage directions may reveal the crystal system to which it belongs.
However, most minerals fracture rather than cleave. Fracture is breakage that does not follow a flat surface. Some fracture surfaces are rough and uneven. Others show smooth, concentric depressions, called conchoidal fractures. Conchoidal fracture typically occurs in glasses, which are non-crystalline solids. However, it also occurs in many common crystalline minerals, for example garnet and quartz.
Specific gravity
Two minerals can look alike, yet a piece of one may be much heavier than an identical-sized piece of the other. The heavier one has a higher specific gravity. When pure, each mineral has a predictable specific gravity. Therefore, this property is a very reliable clue to a mineral's identity. A mineral's specific gravity can be thought of as a ratio of its weight to that of an equal volume of water. For example, the specific gravity of gold is 19.3 (19.3 times that of water), while quartz is 2.65.
To determine a mineral's specific gravity, it is necessary to weigh a sample (using grams), then measure its volume (in cubic centimeters). The weight divided by volume is the density . To calculate specific gravity, divide the mineral's density by that of water. Since the density of water is one gram per cubic centimeter, specific gravity and density are equal (provided all measurements are made using the metric system.)
Other identifying properties
Some minerals have unusual properties that further aid identification. Fluorescent minerals viewed under ultraviolet light glow with various colors. Phosphorescent minerals glow in the dark after exposure to ordinary light. Triboluminescent minerals give off light when crushed or hit. Several minerals containing iron, nickel, or cobalt are magnetic. Over 100 minerals contain uranium , thorium, or other radioactive elements and are therefore radioactive. These are only a few of the unique properties that can be used to identify minerals. Finally, an experienced mineralogist will take into account the location in which an unknown mineral is found. The nature of the surrounding rocks and the presence of other minerals and elements all provide clues to help in identification.
Minerals and their uses
Everything that humankind consumes, uses, or produces has its origin in minerals. Minerals are the building materials of our technological civilization, and a single mineral may have many unrelated uses.
The mineral corundum provides a good example. Corundum is an extremely hard substance. Small bits of corundum are part of the rock called "emery" which has been used since ancient times as an abrasive, to cut and grind metal and stone. Pure corundum is still used for this purpose today. Another property of corundum is that it remains solid and stable at very high temperatures, well past the melting point of iron. Therefore, masses of small corundum crystals pressed together are shaped into "alumina" firebricks, crucibles, and other apparatus to use in furnaces. Corundum is also the basis of several gemstones.
Pure corundum is colorless. However, as is the case with many other minerals, trace amounts of metal in the stone impart brilliant colors. Rubies are corundum colored red by traces of chromium. Sapphires come in shades of blue, yellow, green and violet; these varieties of corundum contain traces of iron, titanium or other elements.
Finally, corundum is indirectly a major source of aluminum metal. The ore of aluminum, called bauxite, is a mixture of several minerals containing aluminum together with oxygen and hydrogen . The first step in releasing the aluminum from the other elements is to convert the bauxite to corundum.
Table 2 lists a wide variety of familiar materials and the minerals that compose them. These and most other minerals will find even wider usage in the future as research in the field of materials science continues.
See also Element, chemical; Industrial minerals; Mining; Precious metals; Van der Waals forces.
Resources
books
Bates, Robert L. Industrial Minerals: How They Are Found and Used. Hillside, NJ: Enslow Publishers, Inc., 1988.
Hazen, Robert M. The New Alchemists: Breaking Through the Barriers of High Pressure. New York: Times Books (division of Random House), 1993.
Hochleitner, Rupert. Minerals: Identifying, Classifying and Collecting Them. 1st English language ed. Translated from German by Kathleen Luft. Hauppage, NY: Barrons Educational Series, Inc., 1994.
Holden, Martin. The Encyclopedia of Gemstones and Minerals. New York: Facts On File, A Friedman Group Book, 1991.
Klein, C. The Manual of Mineral Science. 22nd ed. New York: John Wiley & Sons, Inc., 2002.
periodicals
Ward, Fred. "Rubies and Sapphires." National Geographic 180, no. 4 (October 1991): 100-125.
Sara G. B. Fishman
KEY TERMS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .- Compound
—A pure substance that consists of two or more elements, in specific proportions, joined by chemical bonds. The properties of the compound may differ greatly from those of the elements it is made from.
- Crystal
—A solid, homogeneous body composed of a single element or compound having a fixed and regular internal atomic arrangement that may be expressed by external planar faces.
- Crystal system
—One of six mathematical models used to classify all mineral crystals.
- Deposit
—An accumulation of minerals or other Earth materials that has economic value.
- Earth's crust
—The outermost layer of solid Earth, situated over the mantle and divided into continental and oceanic crust.
- Element
—A pure substance that can not be changed chemically into a simpler substance.
- Mineral
—A naturally occurring solid substance of nonbiological origin, having definite chemical composition and crystal structure.
- Ore
—A mineral compound that is mined for one of the elements it contains, usually a metal element.
- Rock
—A naturally occurring solid mixture of minerals.
- Silicate
—A mineral containing the elements silicon and oxygen, and usually other elements as well.
- X-ray diffraction
—A method using the scattering of x rays by matter to study the structure of crystals.
