Microscopy

views updated

Microscopy

The light microscope

History of light microscopy

Electron microscopy

Scanning tunneling microscopy

Recent developments in microscopy

Resources

Microscopy is the science of producing and observing images of objects that cannot be seen by the unaided eye. A microscope is an instrument the produces the image within microscopy. The primary function of a microscope is to resolve, that is distinguish, two closely spaced objects as separate. The secondary function of a microscope is to magnify. Microscopy has developed into an exciting field with numerous applications in biology, geology, chemistry, physics, and in various other areas of technology.

The light microscope

The most common, inexpensive, and easy to use microscope is the light microscope, which produces a magnified image of the object by bending and focusing light rays. The light microscope uses a variety of glass lenses to produce a magnified image that is focused before the eye. The magnifying properties of a converging lens, like that which is used in a typical magnifying glass or camera. Light from the object is bent, or refracted, as it passes through the lens producing an image that is inverted and magnified. In the simplest compound microscope, two converging lenses are used. The image from the first lens (objective) becomes the object for the second lens (eyepiece). The final image is much larger than either lens could produce independently. With a little effort, one can reproduce this effect by using two magnifying glasses.

The wavelength of visible light ultimately limits the resolving power of the light microscope. Therefore, two objects separated by distances significantly less than about 0.4 micrometers (the smallest wavelength of visible light) cannot be distinguished as separate. This is because the light microscope produces its images by reflecting from or transmitting visible light through a specimen. An analogy can be made to ocean waves at the beach, with wavelengths of a few meters. If two people were wading into the surf only a few inches apart (a separation much less than the wavelength of the ocean waves), it would be impossible to distinguish them as separate by analyzing the ocean waves that reflected from them. Despite these limitations, the resolution of the light microscope is sufficient to produce excellent images of many of the important cell structures and organelles, and consequently still has many applications, chiefly in biology.

History of light microscopy

Since the time of the Romans, it was realized that certain shapes of glass had properties that could magnify objects. By the year 1300, these early crude lenses were being used as corrective eyeglasses. It was not until the late 1500s, however, that the first compound microscopes were developed.

There are several different forms of microscopes available to the researcher in a modern laboratory but all owe their origin to the microscopes that used optical lenses to enlarge objects. The first record describing an artificial lens being used for magnification dates from 1267. The work of English philosopher Roger Bacon (c. 1214–1292) entitled Perspectiva described viewing minute objects through a lesser segment of a sphere of glass or crystal to enlarge them. Spectacles were in use shortly after this period to correct vision and enlarge objects, but it was not until 1595 that the first device that could truly be considered a microscope was made. This microscope was prepared by lens grinder Zacharias Jansen (1580–c.1638), along with his father Hans, in Holland. This was the first compound microscope in that it employed two separate lenses that could be moved relative to each other by the means of a sliding tube. This mechanism allowed the microscope to zoom (to change its magnification) from 3x (three times normal) to 9x (nine times normal).

This system was eventually improved by English scientist Robert Hooke (1635–1703) who added a third lens attached to the viewing (eyepiece) lens. This improvement was carried out using an eyepiece from a telescope, an optical instrument with a longer pedigree than the microscope. Hooke also was the first to publish results on the microscopy of plants and animals. Using a simple two-lens compound microscope, he was able to discern the cells in a thin section of cork. Once the first Jansen microscopes had been made, word spread rapidly throughout the world. As a result, the seventeenth century saw many microscope manufacturers and users appear. It was at this time that the word microscope was first used by an Italian scientific society, which included Italian astronomer and physicist Galileo Galilei (1564–1642) as a member.

Some of the early work that was carried out using these primitive microscopes is still highly regarded today. In 1660, Italian physiologist Marcello Malpighi (1628–1694) was able to prove the blood circulation theories of English physician William Harvey (1578–1657) by discovering the presence of capillaries connecting arteries and veins in the body as well as identifying many microscopic structures in the human body. Some five years later, English scientist Robert Hooke (1635–1703) published the first pictures of the cells making up living organisms. Prior to these works, it had been assumed that the microscope was nothing more than a toy. During this period, some microscopes were 2 feet (0.6 meter) in length and illuminated by oil lamps.

The most famous microbiologist was Antoni van Leeuwenhoek (1632–1723) who, using just a single lens microscope, was able to describe organisms and tissues, such as bacteria and red blood cells, which were previously not known to exist. In his lifetime, Leeuwenhoek built over 400 microscopes, each one specifically designed for one specimen only. The highest resolution he was able to achieve was about 2 micrometers.

By the mid-nineteenth century, significant improvements had been made in the light microscope design, mainly due to refinements in lens grinding techniques. However, most of these lens refinements were the result of trial and error rather than inspired through principles of physics. Ernst Abb´ (1840–1905) was the first to apply physical principles to lens design. Combining glasses with different refracting powers into a single lens, he was able to reduce image distortion significantly. Despite these improvements, the ultimate resolution of the light microscope was still limited by the wavelength of light. To resolve finer detail, something with a smaller wavelength than light would have to be used.

Electron microscopy

In the mid-1920s, French physicist Louis Victor de Broglie (1892–1966) suggested that electrons, as well as other particles, should exhibit wave like properties similar to light. Experiments on electron beams a few years later confirmed de Broglie’s hypothesis. Electrons behave like waves. Of importance to microscopy was the fact that the wavelength of electrons is typically much smaller than the wavelength of light. Therefore, the limitation imposed on the light microscope of 0.4 micrometers could be significantly reduced by using a beam of electrons to illuminate the specimen. This fact was exploited in the 1930s in the development of the electron microscope.

There are two types of electron microscope, the transmission electron microscope (TEM) and the scanning electron microscope (SEM). The TEM transmits electrons through an extremely thin sample. The electrons scatter as they collide with the atoms in the sample and form an image on a photographic film below the sample. This process is similar to a medical x ray where x rays (very short wavelength light) are transmitted through the body and form an image on photographic film behind the body. By contrast, the SEM reflects a narrow beam of electrons off the surface of a sample and detects the reflected electrons. To image a certain area of the sample, the electron beam is scanned in a back and forth motion parallel to the sample surface, similar to the process of mowing a square section of lawn. The chief differences between the two microscopes are that the TEM gives a two-dimensional picture of the interior of the sample while the SEM gives a three-dimensional picture of the surface of the sample. Images produced by SEM are familiar to the public, as in television commercials showing pollen grains or dust mites.

For the light microscope, light can be focused and bent using the refractive properties of glass lenses. To bend and focus beams of electrons, however, it is necessary to use magnetic fields. The magnetic lens that focuses the electrons works through the physical

principle that a charged particle, such as an electron, which has a negative charge, will experience a force when it is moving in a magnetic field. By positioning magnets properly along the electron beam, it is possible to bend the electrons in such a way as to produce a magnified image on a photographic film or a fluorescent screen. This same principle is used in a television set to focus electrons onto the television screen to give the appropriate images.

Electron microscopes are complex and expensive. To use them effectively requires extensive training. They are rarely found outside the research laboratory. Sample preparation can be extremely time consuming. For the TEM, the sample must be ground extremely thin, less than 0.1 micrometer, so that the electrons will make it through the sample. For the SEM, the sample is usually coated with a thin layer of gold to increase its ability to reflect electrons. Therefore, in electron microscopy, the specimen can’t be living. Today, the best TEMs can produce images of the atoms in the interior of a sample. This is a factor of a 1,000 better than the best light microscopes. The SEM, on the other hand, can typically distinguish objects about 100 atoms in size.

Scanning tunneling microscopy

In the early 1980s, a new technique in microscopy was developed which did not involve beams of electrons or light to produce an image. Instead, a small metal tip is scanned very close to the surface of a sample and a tiny electric current is measured as the tip passes over the atoms on the surface. The microscope that works in this manner is the scanning tunneling microscope (STM). When a metal tip is brought close to the sample surface, the electrons that surround the atoms on the surface can actually “tunnel through” the air gap and produce a current through the tip. This physical phenomenon is called tunneling and is one of the amazing results of quantum physics. If such phenomenon could occur with large objects, it would be possible for a baseball to tunnel through a brick wall with no damage to either. The current of electrons that tunnel through the air gap is very much dependent on the width of the gap and therefore the current will rise and fall in succession with the atoms on the surface. This current is then amplified and fed into a computer to produce a three dimensional image of the atoms on the surface.

Without the need for complicated magnetic lenses and electron beams, the STM is far less complex than the electron microscope. The tiny tunneling current can be simply amplified through electronic circuitry similar to what is used in other electronic equipment, such as a stereo. In addition, the sample preparation is usually less tedious. Many samples can be imaged in air with essentially no preparation. For more sensitive samples that react with air, imaging is done in vacuum. A requirement for the STM is that the samples be electrically conducting, such as a metal.

Recent developments in microscopy

There have been numerous variations on the types of microscopy outlined so far. A sampling of these is: acoustic microscopy, which involves the reflection of sound waves off a specimen; x-ray microscopy, which involves the transmission of x rays through the specimen; near field optical microscopy, which involves shining light through a small opening smaller than the wavelength of light; and atomic force microscopy, which is similar to scanning tunneling microscopy but can be applied to materials that are not electrically conducting, such as quartz.

Microscopy is a fascinating subject that has quite literally given scientists and educators a whole new view of the world. In the over 400 years since the field began, massive advances have been made, both in terms of what is technically possible and also in what can be discovered using a microscope. During the last 50 years of the twentieth century, the reliance on light and light microscopes has been reduced in favor of ones that are more powerful. The twenty-first century has opened up even more ways of looking more closely at the world. Current advances in microscopy include new techniques such as multi-photon fluorescence and computerized wide-field deconvolution microscopy. A major advance has come to scientists at the University of St. Andrews, in Scotland, who are developing what they call a super-microscope for use with leading-edge research in such diseases as cancer and Alzheimer diesase. The biophotonics microscope will allow one instrument to perform multiple functions in cellular research; such activities as imaging, organizing, separating, and making holes into cells as small as one-hundredth of a millimeter.

One of the most amazing recent developments in microscopy involves the manipulation of individual atoms. Through a novel application of the STM, scientists at International Business Machines Corporation (IBM) were able to arrange individual atoms on

KEY TERMS

Compound microscope— A light microscope that uses two or more glass lenses to produce an image.

Electron— A negatively charged particle, ordinarily occurring as part of an atom. The atom’s electrons form a sort of cloud about the nucleus.

Glass converging lens— A circular disk with one or two convex curved surfaces used in focusing (converging) light or producing magnified images.

Magnetic lens— A magnet used to focus an electron beam for producing magnified images in an electron microscope.

Micrometer— One millionth of a meter, or 0.001 millimeter (one thousandth of millimeter).

Refraction— The bending of light that occurs when traveling from one medium to another, such as air to glass or air to water.

Wavelength— The distance between two consecutive crests or troughs in a wave.

X ray— Short wavelength light between wavelengths of 0.01 and 0.00001 micrometer.

a surface and spell out the letters “IBM.” This has opened up new directions in microscopy, where the microscope is both an instrument with which to observe and to interact with microscopic objects. Future trends in microscopy will most likely probe features within the atom.

Resources

BOOKS

Becker, Wayne M. Guide to Microscopy. San Francisco, CA: Benjamin Cummings Publishing Company, 2003.

Murphy, Douglas B. Fundamentals of Light Microscopy and Electronic Imaging. New York: Wiley-Liss, 2001.

Sluder, Greenfield, and David E. Wolf, eds. Digital Microscopy: A Second Edition of Video Microscopy. Amsterdam, Netherlands, and Boston, MA: Elsevier Academic Press, 2003.

Spector, David L., and Robert D. Goldman, eds. Basic Methods in Microscopy: Protocols and Concepts from Cells (A Laboratory Manual). Cold Spring Harbor, NY: Cold Spring Harbor Laboratory Press, 2006.

Torok, Peter, and Fu-Jen Keo, eds. Optical Imaging and Microscopy: Techniques and Advanced Systems. Berlin, Germany, and New York: Springer-Verlag, 2003.

Kurt Vandervoort

More From encyclopedia.com