NCR Corporation
NCR Corporation
1700 South Patterson Boulevard
Dayton, Ohio 45479
U.S.A.
(513)445-5000
Fax: (513)445-1418
Public Company
Incorporated: 1900 as National Cash Register Company
Employees: 56,000
Sales: $5.96 billion
Stock Exchanges: New York London Zurich Basel Geneva
When National Cash Register Company was formed during the 19th century, it had one product—cash registers. Today NCR, as it is now known, develops and markets a wide range of computer and terminal systems; office-automation products; automated teller, data processing, and tele-communications services; semiconductor components; soft-ware; and business forms and supplies.
NCR’s first years were shaped largely by John Henry Patterson, who was president from 1884 to 1921. Patterson’s early emphasis on sales, his initiation of business practices which became standards for other companies and industries, and his pioneering efforts in industrial welfare made NCR a role model for other companies during the late 1800s and early 1900s.
While running a dry-goods operation in Ohio during the early 1880s, Patterson found he was losing money because not all sales were being reported by his clerks. When Patterson learned of a device called a cash register, he ordered two from James and John Ritty, who had recently established a Dayton, Ohio-based company called National Cash Register. In 1882 the Rittys sold part of their company and renamed it the National Manufacturing Company.
Patterson, meanwhile, was reaping such financial rewards from the use of his cash registers that he bought stock in the Ritty’s company. He eventually joined the board of directors and suggested that the company use nationwide marketing techniques to sell its cash registers. Patterson’s ideas met with opposition, and in 1884 he bought additional stock and took control of the company. Once president, Patterson again named the company National Cash Register Company.
Patterson moved quickly to change NCR’s emphasis from manufacturing to sales. His interest in sales led to the concept of quotas and guaranteed sales territories for agents. Patterson also provided his agents with sales seminars, training brochures, and scripted sales pitches, and required them to wear white shirts and dark suits. All of these practices were new at the time but soon became widespread at other-companies.
Cash register sales responded almost immediately to Patterson’s techniques. Sales more than doubled to 1,000 machines a year by 1886, while by 1888 the number of NCR employees had grown from about 12 to over 100. About this time Patterson also began to produce various forms of printed advertising. Beginning in the late 1880s, prospective customers were inundated with weekly or monthly advertising circulars and direct-mail letters describing products. Employees’ publications were introduced to bolster communication and enthusiasm about meeting sales quotas. Output —the first employee newspaper—listed sales, discussed the benefits of cash registers, and printed encouraging words from satisfied customers. During his first decade, Patterson also established an international division.
Poor economic conditions in the 1890s affected NCR like many other companies in the United States. Between 1892 and 1897 the company’s production was reduced and employees worked scaled-down weeks. The company also looked more closely at the manufacturing side of business. A system of interchangeable parts for cash register models was introduced, streamlining production and trimming overhead.
In 1894 the company constructed a new and larger “safety-conscious” facility in Dayton with the aid of bank loans. The following year Patterson hired Thomas J. Watson, who rose quickly through the sales ranks to become a sales manager in New York and later became part of an inner circle of Dayton executives. It was Watson who led the campaign to reduce competition, including a massive advertising blitz as well as an adamant defense of patents. By 1897, NCR’s competition had been reduced to three companies, down from over 80 a decade before.
In 1900 NCR reported the sale of its 200,000th cash register, and employed 2,269 people. That same year the company was chartered as a New Jersey corporation for the purpose of selling stock. Construction of a ten-building facility began in 1906, and overseas operations were growing as well. In a company publication that year, NCR boasted that its sales force extended from Norway and Alaska to New Zealand and China, with nearly 1,000 agents in more than 270 offices.
That same year a young inventor named Charles F. Kettering gave the company its first electric cash register. Kettering, who had been hired just two years earlier, also developed NCR’s Class 1000 machine, a low-cost redesigned register which remained in production for nearly 40 years with only minor changes. Kettering left the company in 1909 and joined the automotive industry.
Spurred by the success of Kettering’s cash register and the Class 1000 machine, sales continued to climb throughout the early 1900s. By 1911 the one millionth machine had been sold. NCR’s aggressive battle to secure patent rights and fend off competition led the American Cash Register Company to file an antitrust complaint based on the recently approved Sherman Act. In 1912 the government brought NCR to trial and presented 32 cases of alleged trade interference. The following year Patterson, Watson, and 20 other officers were found guilty of trade restraint and unlawful monopoly in three of those cases. Two years later the decision was reversed by a higher court.
The Dayton Flood of 1913 brought another kind of prominence to NCR. Under Patterson’s leadership, the company responded to the flood by suspending all operations and providing relief shelter in company facilities. In 1913 Watson left the company after a falling out with Patterson.
During the early stages of the World War I, NCR continued to make cash registers while involved in wartime production contracts with the government. By 1919 the company was operating almost solely on a wartime production basis.
John Henry Patterson passed the reins of the company presidency in 1921 to his son Frederick Beck Patterson. In 1922 Frederick Patterson also assumed the duties of the chairman of the board after his father’s death. The 1920s marked NCR’s gradual entrance into its accounting-machine era. NCR already had proved its dominance in the cash register field, having controlled over 95% of that market prior to the outbreak of the war. In 1921 NCR announced its class 2000 itemizer, which provided 30 totals and embodied what the company believed were the best features of all previous registers.
Frederick Patterson exercised voting control over NCR after the death of his father, while Comptroller Stanley C. Allyn and director John H. Barringer led the company’s first major diversification drive. The company’s profits rose from $2.8 million in 1921 to $7.8 million in 1925. Because of its success, the company went public with stock sales for the first time.
The 1920s were good years for office-equipment firms. After 1925, competitors made inroads into the cash register market, while NCR failed to introduce new products. Sales flattened for NCR, and by 1928 Remington Rand topped the list of business-machine companies, taking in $59 million to second-running NCR’s $49 million. Young IBM was fourth at the time with $19 million reported in sales.
In attempts to hasten the diversification drive, NCR purchased the Ellis Adding-Typewriter Company in January 1929. That same year the company announced the class 3000, NCR’s first hybrid machine, which represented a step up in the area of payroll, billing, and accounting operations. The promise of the new machine was dampened by the Depression later that year. Sales and earnings plunged while the company began a four-year process of cutting the number of its employees in half. With the company nearly bankrupt by 1931, New York bankers Dillon, Read and Company, who had set up the 1925 stock sales, were ready to invade the company.
Quick action was needed. NCR’s board of directors sought out Edward Deeds to take control of the company, and Frederick Patterson agreed to step down as chairman in 1931. Patterson remained as president until Deeds assumed that additional post in 1936, and it was Deeds who turned things around. Joining NCR at the beginning of the century, Deeds had been put in charge of engineering and construction for a new factory. By 1910 he had become vice president. Deeds left NCR for Delco in 1915, and later helped found the Wright Airplane Company with Orville Wright, Charles Kettering and H.E. Talbott. Deeds’s success by 1931 was evident, as he sat on the corporate boards of 28 companies.
Shortly after Deeds took control, the company purchased the Remington Cash Register Company, whose assets strengthened NCR’s position. In 1934 the company moved back into the black. Despite broad price fluctuations, by mid-decade sales were stabilizing and overseas operations were expanding in Great Britain, Europe, Central America, South America, and the Middle East and Far East. By the end of the decade NCR was third in the business-machine field behind Remington and fast-climbing IBM. NCR in 1939 earned $12 million less than it did the year prior to the Depression. In 1940 Stanley Allyn assumed the post of president, while Deeds continued to serve as chairman and chief executive.
World War II had a significant impact on NCR, as well as on other data-processing and business-machine companies, spurring the conversion from office tabulating equipment to data processing. By the time the United States entered the war in 1941, NCR’s expansion into Central America and South America in the 1930s had become important, and helped to offset the wartime reduction or elimination of operations in Japan, Germany, and Australia. For the next few years the sale of rebuilt machines was the only business NCR continued in countries directly involved in the war. By 1942, the U.S. War Production Board halted the manufacturing of all cash registers in order to conserve metal.
Wartime contracts for such items as bomb fuses and rocket motors covered the overhead during the war, while reconditioning of machines provided modest profits. An in-house research program in the electronics field developed prior to the war paid dividends when the navy asked NCR to build a computer-like device to calculate bombing navigational data. NCR worked on a secret operation for the navy to help break the German ENIGMA communication cipher. The company produced the Bombe, a high-speed electromechanical decrypting machine, building 120 Bombes during the course of the war. This project remained secret until its declassification in the 1980s.
By the war’s end a pent-up market for cash registers and accounting machines resulted in a hiring surge for the company in Dayton. Business boomed after the war. Between 1946 and 1949 NCR reestablished itself in war-torn areas of the United Kingdom, West Germany, and Japan. Improvements and expansion continued into the early 1950s, with a rebuilt plant in Australia, a new factory in Toronto, and new office buildings in Hawaii and Mexico.
NCR continued its electronics work begun during the war years and in 1952 secured a defense contract for a bombing navigational computer. That same year NCR entered into a stock-purchase agreement with Computer Research Corporation, which became NCR’s electronics division the following year. Development of a computer geared toward scientific work had limited impact, and the company’s role in the computer industry remained conservative in the mid-1950s. The 1956 introduction of the Post-Tronic, an electronic posting machine for banking, was successful. Sales of the Post-Tronic eventually passed the $100 million mark before the machine passed out of use near the end of the 1960s.
With NCR on the edge of new era, the aging Deeds retired as chairman in 1957 and was succeeded by Allyn. Robert S. Oelman, who had been instrumental in procuring wartime contracts as a company vice president, became president. Later that year NCR announced the 304, a general-purpose computer based on solid-state technology. NCR’s first “small” computer debuted in 1960. This computer, the 390, was manufactured by Control Data Corporation (CDC) for NCR.
In the early 1960s NCR increased its development of computers, as well as peripheral devices and software. In 1962 Oelman became chairman of the board and R. Stanley Laing was named president two years later. Mid-decade saw NCR continue to operate under a split strategy of selling products to its old customer line as well as to new customers in the data-processing market. NCR’s computer-related products were successful, but its innovations still remained conservative and the company’s marketplace continued to revolve around banking and retailing.
In the 1960s NCR formed its business forms and supply division. In the late 1960s, NCR became known as one of the “Seven Dwarfs,” because of its relative position of inferiority to IBM. Joining NCR in these ranks were General Electric (GE), RCA, Burroughs, UNIVAC, CDC, and Honeywell. With GE and RCA bowing out of the computer field in the early 1970s, the five remaining became known as the BUNCH, an acronym made up of the first letter of each name.
NCR announced its third generation of computers in 1968 with the introduction of the Century Series. The series included a variety of business applications and allowed NCR to market its wares to a broader customer base. NCR’s failure to take advantage of new conditions calling for terminals and software cost it some market share and resulted in a trend of declining profits from 1969 to 1972.
The first half of the 1970s marked the greatest transition period in the history of NCR, as it attempted to move full-force into the computer market. The period was marred by a number of setbacks that were worsened by an inflationary economy and poor business climate. Labor costs to produce older technology products were enormous, and the company also had marketing problems. Layoffs followed declining earnings and the company was hit by a three-month strike at its Dayton plant in late 1971. The strike idled 8,500 production and maintenance employees, sharply reduced equipment deliveries, and cost the company millions of dollars in lost orders.
In 1971 NCR entered into a cooperative agreement with CDC to establish a computer peripherals company. The following year NCR established its microelectronics division. Declining profits continued through 1972, and NCR posted its first net loss since 1933.
With revenues on shaky ground, William S. Anderson was named president in 1972 and chairman of the board in 1974. Anderson, who had been successful in heading up NCR’s Far East operations and NCR Japan, was the first president to come from outside the parent company. His success in Japan was due in part to revamping the company’s marketing organization there, and as president, Anderson quickly moved to modify NCR’s marketing structure through a similar “vocationalizing” system. The branch-manager system, in which a branch manager was responsible for sales from a number of different industries, was replaced by a system where a district manager oversaw one major marketing area, and marketing personnel were trained to specialize in a single vocational area. Areas of specialization included retail, finance, commercial business, industrial, medical, educational, governmental, and media. In 1974, NCR reported its computer business was finally out of the red. That same year the company’s name was changed from National Cash Register to NCR Corporation.
NCR began making great strides in the computer field after naming Charles E. Exley Jr. president in 1976. A 22-year veteran of Burroughs Corporation, Exley oversaw the introduction of a new series of computers and related equipment during the later part of the decade. NCR’s 1976 announcement of the 8000 series was well received, and improvements were made throughout the remainder of the decade.
NCR’s push into computers resulted in strong earnings, while the company began a series of smaller company acquisitions that boosted expertise in factory data systems, micro-cards, and IBM-compatible data systems. In fewer than five years NCR revamped its entire product line. During this time the company withdrew from the mainframe computer arena and moved closer to its traditional core industries such as banking and retailing. In 1979 the company passed the $3 billion revenue mark.
NCR came into the 1980s strong, posting its first double-digit increase in revenue in 1980, but strong growth stalled in 1981, and earnings dropped. Product lines besieged by bugs in the late 1970s resulted in user lawsuits being filed against NCR in the early 1980s. In 1980 a lawsuit was filed by the small Oakland, California, drycleaning firm Glovatorium. Glovatorium, a first-time computer user, had purchased an NCR Spirit/8200 system to do routine accounting, but the system failed to work. NCR defended its case on the grounds that contracts with Glovatorium had contained limitations of liability and disclaimers. The California judge ruling in the case in 1981 said NCR had targeted first-time computer users and was under a special obligation to be fair in dealing with the user. Punitive damages totaling $2 million were awarded along with compensatory damages for breach of warranty and intentional misrepresentation. The following year NCR agreed to a $2.6 million settlement with Glovatorium. The Tower family of microcomputers was introduced in 1982, and became one of the keys to NCR’s success in the mid-1980s.
In 1983 Exley was named chief executive officer and in the following year board chairman. Under Exley, NCR underwent a corporate restructuring process, made a push back into personal computers, began reemphasizing fiscal control, and started a long-term plan of repurchasing its own stock. By 1986 NCR was again posting double-digit increases, while most of the computer industry was suffering from a market recession.
NCR’s revenue had grown to $6 billion by 1988, as the company developed customized products that generated significant indirect sales. Meanwhile NCR’s microelectronic division became a leading producer of semiconductors, and the company surpassed IBM as the largest worldwide supplier of automatic teller machines (ATMs). Personal computers and the Tower microcomputers also saw significant sales gains in the emphasis switch from mainframes to distribution processing.
In 1988 Gilbert P. Williamson was promoted from executive vice president to president, while Exley remained chairman and CEO. The following year overall sales began to dip, although foreign sales were rising. The company closed out the decade as the last thriving member of the BUNCH that had avoided a merger or sellout of interests.
NCR expected to keep its products on par with the computer industry’s powerhouses. In late 1989 it announced it was jumping into the market for microcomputers that were based on a powerful new microchip. The announcement helped NCR land an agreement with Businessland Inc. to begin selling the new line in 1990.
According to Exley, NCR entered the 1990s with a goal to “reach all markets.” The company had operations in nine countries with products sold in more than 120 countries. NCR expected continued success in the ATM and semiconductor markets and expanded sales in transaction- and information-processing markets. The company also expected indirect sales to increase, with a number of NCR-manufactured products being sold bearing other companies’ labels.
NCR looked for benefits from the implementation of “concurrent engineering,” to keep its operations on par with Japanese competitors through a more-timely and less-costly manufacture of products. Concurrent engineering eliminated a number of independent steps of production, some which had been contracted out, and replaced that system with one where design engineers and manufacturing personnel collaborated in a closer working environment, thereby reducing the time needed to correct glitches. NCR had introduced concurrent engineering in 1987 in its new Atlanta, Georgia, plant and by the 1990s the concept was implemented to some degree in all of NCR’s manufacturing facilities.
Principal Subsidiaries
NCR Nederland N.V. (Netherlands); NCR Australia Pty. Ltd.; NCR Canada Ltd.; NCR France, S.A.; NCR GmbH (Germany); NCR Japan Ltd.; NCR Espana, S.A. (Spain); NCR (Switzerland); NCR Ltd. (U.K.); Applied Digital Data Systems, Inc.; NCR Danmark A/S (Denmark); NCR Argentina SAIC; NCR de Mexico, S.A. de C.V.
Further Reading
Crowther, Samuel, John H. Patterson, Pioneer in Industrial Welfare, New York, Doubleday, Page & Company, 1923; Allyn, Stanley C., My Half Century with NCR, New York, McGraw-Hill, 1967; McClellan, Stephen T., The Coming Computer Industry Shakeout, New York, John Wiley & Sons, 1984; Celebrating the Future, 1884-1984, Dayton, Ohio, NCR Corporation, 1984; Bernstein, Mark, “John Patterson rang up success with the Incorruptible Cashier,” Smithsonian, June 1989.
—Roger W. Rouland
