Skip to main content

Impact Crater

Impact Crater

Resources

An impact crater is an oval or near-circular depression on the surface of a planet, moon, asteroid, or other celestial body. Also called simply a crater or an impact basin, it is typically the most common type of landform seen on the surface of most of the rocky and icy planets and satellites in the solar system. Impact craters form when a minor planetary body (meteoritic fragment, asteroid, or comet) strikes the surface of a larger body or major planet. A physical scar is excavated on the surface and much energy is dispersed in the process. Meteor Crater, also, called Barringer Crater, was the first impact crater discovered by scientists on Earth. It was located in the 1920s in Arizona by workers who found pieces of the meteorite that impacted Earth. American geologist Daniel Barringer (18601929) was one of the first scientists to identify the geological features of an impact crater. Barringers discovery was mostly ignored, as were other discoveries, until the Apollo Moon missions provided evidence for crating on the moon, which led to more serious consideration of past studies of such impact craters on the Earth.

Most impact craters are generally circular, although elliptical impact craters are known from very low-angle or obliquely impacting projectiles. In addition, some

impact craters have been tectonically deformed and, thus, are no longer circular. Impact craters may be exposed, buried, or partially buried. Geologists distinguish an impact crater, which is rather easily seen, from an impact structure, which is an impact crater that may be in a state of poor preservation. A meteorite crater is distinguished from other impact craters because there are fragments of the impacting body preserved near the crater. Typically, a meteorite crater is rather small feature under 0.62 mi (1 km) in diameter.

Volcanic activity can also produce circular depressions (which are also sometimes called craters, but these are not impact craters). Impact craters bear the evidence of hypervelocity impact (most cosmic objects are moving in a solar orbit at several dozen km/sec). These features include meteoritic fragments (as small craters) and shocked and shock-melted materials within and about the impact crater.

Impact craters are obliterated or covered over by younger materials where rates of volcanic activity are very high (e.g., Venus and Io) and where weathering, erosion, and sedimentation are highly active (e.g., Earth and parts of Mars). At present, there are about 1,000 suspected impact craters on Venus and perhaps one or two on Io. On Earth, 150 to 200 impact craters and impact structures have been scrutinized sufficiently to prove their origin. Several hundred other possible impact features also have been identified. Given Earths rather rapid weathering and tectonic cycling of crust, this is a relatively large preserved crater record. On Mars, there are several thousand of impact craters in various stages of degradation. Even though preserved craters are rare on Earth, there is no reason to suspect that Earth has been bombarded any less intensively than the moon (which has millions of impact craters), and, thus, the vast majority of Earths impact features must have been erased.

Impact craters of the Earth are subdivided into three distinctive groups based upon their shape, which are, in turn, related to crater size. The simple impact crater is a bowl-shaped feature (usually less than 1.2 mi [2 km] in diameter) with relatively high depth to diameter ratio. The complex impact crater has a low depth to diameter ratio and possesses a central uplift and a down-faulted and terraced rim structure. Complex impact craters on the Earth range from the upper limit of simple impact craters to approximately 62.1 m (100 km) in diameter. Multi-ring craters (also called multi-ring basins) are impact craters with depth to diameter ratios like complex impact craters, but they possess at least two outer, concentric rings (marked by normal faults with downward motion toward crater center). Earth has five known multi-ring impact basins, but many more are known on the moon and other planets and satellites in the solar system, where they range from several hundred kilometers up to 2,485.5 mi (4,000 km) in diameter. The gravity of a planet or satellite and the strength of the surface material determine the transition diameter from simple to complex and complex to multi-ring impact crater morphology.

Impact craters go through three separate stages during formation. The contact and compression stage comes first. Contact occurs when the projectile first touches the planet or satellites surface. Jetting of molten material from the planets upper crust can occur at this stage and initial penetration of the crust begins (this is the origin of most tektites or impact glass objects). During compression, the projectile is compressed as it enters the target crustal material. Depending upon relative strength of the target and projectile, the projectile usually penetrates only a few times its diameter into the crust. Nearly all the vast kinetic energy of the projectile is imbued into the surrounding crust as shock-wave energy. This huge shock wave propagates outward radially into the crust from the point of projectile entry. At the end of compression, which lasts a tiny fraction of a second to a few seconds at most (depends upon projectile size), the projectile is vaporized by a shock wave that bounces from the front of the projectile to the back and then forward. At this point, the projectile itself is no longer a factor in what happens. The subsequent excavation stage is driven by the shock wave propagating through the surrounding target crust. The expanding shock wave moves material along curved paths and, thus, ejecting debris from the continually opening crater cavity. This is the origin of the transient crater cavity. It may take several seconds to a few minutes to open this transient crater cavity. Material cast out of the opening crater during this phase forms an ejecta curtain that extends high above the impact area. This ejected material will fall back, thus, forming an ejecta blanket in and around the impact crater (usually extending out about three crater radii). During the final modification stage, gravity takes over and causes crater-rim collapse in simple impact craters. In complex and multi-ring impact craters, there is central peak or peak-ring uplift and coincident gravitational collapse in the rim area. Lingering effects of the modification stage may go on for many years after impact.

Impact crater densities are used in planetary geology to gauge the age of surfaces that have been exposed for long periods of geological time and have not been covered by volcanic flows or sediments. Impact crater sizes are also used to gauge age because the average size of impacting bodies has declined, on average, over time since the end of planetary accretion (early in the solar systems history). Sharpness, or freshness, of craters on some planetary surfaces is also a descriptive gauge of age of the crater itself. Crater studies on old planetary surfaces, like those of airless worlds like Mercury, the moon, some icy satellites of the outer planets, and some asteroids allow age comparisons to be made between the bodys surfaces. Also, crater studies allow estimates to be made of the change in density or flux of impacting bodies over time in the solar system.

On Earth (and perhaps on early Mars), it is thought that impact events related to craters greater than 62.1 m (100 km) in diameter likely had globally devastating effects. These effects, which may have led to global ecosystem instability or collapse, included: gas and dust discharge into the upper atmosphere (blocking sunlight and causing greenhouse effects); heating of the atmosphere due to re-entry of ballistic ejecta (causing extensive wildfires); seismic sea waves (causing tsunamis); and acid-rain production (causing damage to soils and oceans). There is much research currently underway to about the effect of cosmic impact events upon life on the Earth during the geological past.

Resources

BOOKS

Turtle, Elizabeth, Elisabetta Pierazzo, and Erik Asphaug. Impact Craters in the Solar System. Berlin, Germany, Springer-Verlag, 2007.

OTHER

Britt, Robert Roy. Space.com. Giant Crater Found: Tied to Worst Mass Extinction Ever. <http://www.space.com/scienceastronomy/060601_big_crater.html> (accessed October 12, 2006).

Planetary and Space Science Centre, University of New Brunswick. The Earth Impact Database. <http://www.unb.ca/passc/ImpactDatabase/> (accessed October 12, 2006).

David T. King Jr.

Cite this article
Pick a style below, and copy the text for your bibliography.

  • MLA
  • Chicago
  • APA

"Impact Crater." The Gale Encyclopedia of Science. . Encyclopedia.com. 20 Aug. 2018 <http://www.encyclopedia.com>.

"Impact Crater." The Gale Encyclopedia of Science. . Encyclopedia.com. (August 20, 2018). http://www.encyclopedia.com/science/encyclopedias-almanacs-transcripts-and-maps/impact-crater

"Impact Crater." The Gale Encyclopedia of Science. . Retrieved August 20, 2018 from Encyclopedia.com: http://www.encyclopedia.com/science/encyclopedias-almanacs-transcripts-and-maps/impact-crater

Learn more about citation styles

Citation styles

Encyclopedia.com gives you the ability to cite reference entries and articles according to common styles from the Modern Language Association (MLA), The Chicago Manual of Style, and the American Psychological Association (APA).

Within the “Cite this article” tool, pick a style to see how all available information looks when formatted according to that style. Then, copy and paste the text into your bibliography or works cited list.

Because each style has its own formatting nuances that evolve over time and not all information is available for every reference entry or article, Encyclopedia.com cannot guarantee each citation it generates. Therefore, it’s best to use Encyclopedia.com citations as a starting point before checking the style against your school or publication’s requirements and the most-recent information available at these sites:

Modern Language Association

http://www.mla.org/style

The Chicago Manual of Style

http://www.chicagomanualofstyle.org/tools_citationguide.html

American Psychological Association

http://apastyle.apa.org/

Notes:
  • Most online reference entries and articles do not have page numbers. Therefore, that information is unavailable for most Encyclopedia.com content. However, the date of retrieval is often important. Refer to each style’s convention regarding the best way to format page numbers and retrieval dates.
  • In addition to the MLA, Chicago, and APA styles, your school, university, publication, or institution may have its own requirements for citations. Therefore, be sure to refer to those guidelines when editing your bibliography or works cited list.