Flax
Flax
The flax plant , genus Linum, family Linaceae, is the source of two important commodities. Linen is a historic, economically important cloth made from the fiber of flax. Linseed oil is obtained from the pressed seeds of the plant. There are about 200 species of Linum. The species that is cultivated most extensively is L. usitatissimum, an annual plant grown for its fiber and seed. Varieties of L. usitatissimum grown as a fiber crop have been selected to have stems that are tall, which ensures long fibers. Varieties grown for seed are shorter, with extensive branching, and thus bearing more flowers and yielding more seed.
Flax plants have gray-green, lanceolate (long and tapered), alternate leaves. Their height ranges from 1-4 ft (0.3-1.2 m). Many cultivated varieties of flax have blue flowers, although some have white, yellow, pink, or red flowers. The flowers are self-pollinating and symmetrical, with five sepals, five petals, five stamens, and a pistil with five styles. The fruit is a capsule with five carpels, each containing two brown, yellow, or mottled, shiny seeds. Flax crops are grown in rotation with other crops to avoid fungal pathogens that cause diseases in flax plants.
Linum angustifolium is a wild, perennial flax, is thought to be a "parent" of cultivated flax. There is evidence that this species was used by prehistoric peoples in Switzerland about 10,000 years ago. The ancient
Egyptians wrapped their mummies in linen. Today, Russia is the largest producer of flax. Flax grown in the United States (mainly for seed) is raised in the northern plains states.
Fiber flax
Flax plants grown for fiber require well-weeded well-drained soil , and a cool, humid environment. The plant is harvested when the stems begin to turn brown. Any delay in harvesting results in deterioration of the fiber, causing it to lose its luster and softness. The plants are often harvested by hand, uprooting the plant to preserve the length of the fiber. Flax is also harvested mechanically, but fiber length is sacrificed to some degree. Good fiber is 12-20 in (20-30 cm) long. The seed pods (bolls) are separated from the uprooted plants, either mechanically or by hand, a process called rippling.
The uprooted plants, now called straw, are then retted. This is a process by which bacteria and fungi are allowed to rot the semi-woody stalk tissues, and break down the gummy substance (pectin) that binds the fibers together. If the straw is not retted enough, removal of the semi-woody stalk is difficult, but if the straw is over-retted, the fiber is weakened. In pool or dam retting, the straw is placed in a tank of warm water , while in dew retting it is spread out in a field, allowing the straw to become dampened by dew or rain. Stream retting is a method where the flax bundles are put into flowing streams, and this produces the best linen fiber. Straw can also be retted chemically. The various retting processes are used to create various shades and strengths of fiber.
After retting, the straw is dried and put through a machine called a flax brake, which crushes the stems into small, broken pieces called shives. The shives are removed from the fiber by a process called scutching, done either mechanically or by hand. The fibers are then straightened out by hackling or combings, sorted according to length, and baled. The long fibers, called line fiber, are used to make fine fabrics, threads used for bookbinding and shoe making, and twine. The short, damaged or tangled fibers, called tow, are used for products such as rope, and rougher linen yarns.
The finest, strongest linen is made from flax immersed in hot water, and spun while wet; dry spinning produces a rougher, uneven yarn. Linen yarn is very strong, but inflexible. Flax fiber is basically pure cellulose , and is not very porous, making it difficult to dye unless the cloth is bleached first. The manufacturing of linen is very labor intensive and its price reflects this fact. France and Belgium have the reputation of producing the highest quality linens.
Seed flax
Seed flax grows best in a warm climate, but hot temperatures and drought can reduce the crop yield and oil content. The soil should be fertile and well weeded. To obtain the seed, the flax plants are allowed to over-ripen, which destroys the plant's value for its fiber as linen. Flax seed contains about 40% oil, and the seeds are crushed and pressed to remove this product. Linseed oil, which hardens by oxidation, is used to manufacture paints, varnishes, patent leather, linoleum, and oilcloth.
The remaining seed and hull wastes after pressing are used for livestock feed. Fiber can also be obtained from seed flax plants. This fiber is made into special papers.
See also Natural fibers.
Resources
books
Lewington, Anna. Plants for People. New York: Oxford University Press, 1990.
periodicals
Akin, D.E. "Enzyme-Retting of Flax and Characterization of Processed Fibers." Journal Of Biotechnology 89, no. 2-3 (2001): 193-203.
"Nontraditionally Retted Flax for Dry Cotton Blend Spinning." Textiler Research Journal 71, no. 5 (2001): 375-380.
Christine Miner Minderovic
KEY TERMS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .- Hackling
—A combing procedure to straighten flax fibers.
- Linen
—Thread or cloth made from the long fibers of the flax plant.
- Linseed oil
—Oil obtained from the seeds of the flax plant.
- Retting
—A process whereby flax plants are moistened, allowing the stem covering to rot, and to break down the substances that hold the fiber together.
- Rippling
—A manual method of removing seed pods from the flax stalks, by drawing the stalks through combs.
- Scutching
—A process in which the flax fiber is beaten, separating it from the stem.
- Shives
—Small pieces of flax stem obtained after putting the retted straw through a machine called a flax brake, which crushes the woody part of the stem without damaging the fiber.
