Shipbuilding

views updated

SHIPBUILDING

SHIPBUILDING. Shipbuilding in the United States began out of necessity, flourished as maritime trade expanded, declined when industrialization attracted its investors, then revived in World War II. Shipyards grew from barren eighteenth-century establishments with a few workers using hand tools even for "large" ships (200 tons) to huge twentieth-century organizations where thousands of employees use ever-changing technology to build aircraft carriers of 70,000 tons. Today the United States no longer leads the world in ship production, but it is still a major force in marine technology and engineering.

American shipbuilding began when Spanish sailors constructed replacements for ships wrecked on the North Carolina coast in the 1520s. Other Europeans launched small vessels for exploration and trade. In the 1640s the trading ventures of Massachusetts built vessels that established New England as a shipbuilding region. By the 1720s, however, New England shipyards faced competition from Pennsylvania and later from other colonies with growing merchant communities, such as Virginia, where slave labor boosted production.

The typical eighteenth-century urban shipyard was a small waterfront lot with few if any permanent structures. Rural yards, where land was cheap and theft less of a problem, often had covered sawpits, storage sheds, and wharfs. The labor force consisted of about half a dozen men, sawyers and shipbuilders as well as apprentices, servants, or slaves. Work was sporadic, and accidents, sometimes fatal, were common. Yet from such facilities came 40 percent of Great Britain's oceangoing tonnage on the eve of the Revolution. After Independence, shipbuilding stagnated until European wars in the 1790s enabled American shipyards to launch neutral vessels for their countrymen and merchant ships or privateers for French and British buyers.

During the Golden Age of American shipbuilding, from the mid-1790s through the mid-1850s, shipping reached its highest proportional levels, the navy expanded, and the clipper ship became a symbol of national pride. New technology entered the shipyard: the steam engine supplied supplementary power for some sailing vessels and the sole power for others; iron first reinforced and then replaced some wooden hulls. Many shipowners, attracted to the promised economy of size, ordered larger ships that required more labor, raw materials, and technology. Meanwhile, a transportation revolution compelled coastal vessels to connect with and compete with canal


barges, inland river trade, and railroads. At this time, many New England merchants turned to manufacturing for higher and steadier returns.

By the late 1850s, the glory days had begun to fade. Maine and Massachusetts shipyards launched more tonnage than anyone else, but they did not construct steam-ships, while builders outside New England recognized that the future belonged to steam, not sail. The Civil War promoted naval construction, with both sides making remarkable innovations, but the war devastated commercial shipbuilding. Confederate raids on Union ships convinced some Yankee merchants to sell their ships to foreign owners. By 1865, American tonnage in foreign trade was half that of the late 1850s; at the end of the decade it was down to a third.

In 1880, Pennsylvania shipyards launched almost half of what the top ten states constructed. Iron, not steam, now represented the future; most shipyards could not afford the transition from wood to iron. Massachusetts build-ers held on by mass-producing small boats for offshore fishing schooners. Capital investments per yard many times greater than those of other states allowed Pennsylvania and Delaware yards to succeed. With yards in six of the ten states producing at a rate of less than two vessels per year, many establishments did not survive the introduction of iron.

Two successful shipyards of the period, William Cramp and Sons in Philadelphia and Newport News Shipbuilding and Drydock Company of Virginia, embraced the new technology and benefited from the naval modernization program of the 1890s. Naval contracts proved vital to these builders' success, and the strength of the navy depended upon such shipyards.

When the United States entered World War I, it undertook an unprecedented shipbuilding program. After the war, builders watched maritime trade decline through


the 1920s as the coastal trade gave way to trains and trucks and quotas restricted the once profitable immigrant trade. The Newport News Shipbuilding and Drydock Company survived by performing non-maritime work such as building traffic lights. Relief did not come until the 1930s, when the U.S. government began ordering aircraft carriers to serve the dual purpose of strengthening the navy and providing jobs for the unemployed.

At the outbreak of World War II, Great Britain asked the United States to mass-produce an outdated English freighter design that had many deficiencies but possessed the all-important virtue of simplicity. Thanks to new welding techniques and modular construction, the "Liberty" ship became the most copied vessel in history. More than 2,700 were built—many completed in less than two months, some in a few weeks. This remarkable feat, accomplished by a hastily trained workforce using parts produced across the nation, was directed by Henry Kaiser, who had never before built a vessel. American shipyards also produced 800 Victory ships (a faster, more economical freighter), more than 300 tankers, and hundreds of other warships. American shipbuilding, a key factor in the Allied victory, increased 1,000 percent by war's end, making the United States the world's undisputed maritime power.

Following World War II, America abandoned maritime interests and focused on highways, factories, and planes. During the 1950s, Japanese, European, and Latin American shipbuilders outperformed American shipyards, while American Atlantic passenger liners succumbed to passenger jets. A nuclear-powered freighter, Savannah, proved both a commercial and public relations failure. While Americans pioneered development of the very economical container ship, it was quickly adopted by foreign competitors. Despite technical advances, shipbuilding continued to decline in the face of waning public and private support.

Today, Japan, Korea, and China build over 90 percent of the world's commercial tonnage; the U.S. share is only 0.2 percent. Since 1992, U.S. shipyards have averaged fewer than nine new commercial ships per year of 1,000 tons or more. Submarines and aircraft carriers are still under construction, although in reduced numbers; guided-missile destroyers and support vessels are on the rise. Modern maritime technology requires significant resources and expertise. Unlike the colonial years, when every seaport, however small, had a few shipyards, today the nation has just half a dozen major shipyards in total. The United States still enjoys an abundance of materials, skilled labor, and engineering ingenuity. It requires only large-scale public and private support to reignite interest in this once flourishing industry.

BIBLIOGRAPHY

Chapelle, Howard I. The National Watercraft Collection. Washington, D.C.: United States National Museum, 1960. 2d ed., Washington, D.C.: Smithsonian Institution Press, 1976.

Goldenberg, Joseph A. Shipbuilding in Colonial America. Charlottesville, Va.: University Press of Virginia, 1976.

Hutchins, John G. B. The American Maritime Industries and Public Policy, 1789–1914. Cambridge, Mass.: Harvard University Press, 1941.

Pedraja, René de la. The Rise and Decline of U.S. Merchant Shipping in the Twentieth Century. New York: Macmillan, 1992.

JosephGoldenberg

See alsoArmored Ships ; Clipper Ships ; Packets, Sailing ; Savannah ; Steamboats .

More From encyclopedia.com