Lithography

views updated May 21 2018

Lithography

Lithography in printing

Photolithography

Lithography and integrated circuits

Resources

Lithography is a method of printing an image by applying patterned layers of color to paper with a series of etched metal or stone plates. This is the process used to print many newspapers and multi-colored lithographs. It is also the general name for the techniques used to fabricate integrated circuits (ICs).

Lithography in printing

The concept of lithography was developed by German actor and playwright Johann Alois Senefelder (17711834) between 1796 and 1798, while in Bohemia (what is now the Czech Republic). He used a stone slab with printed grease marks and dampened it with water. When a coating of ink was applied to the stone, it adhered to the grease marks and washed away from the wet areas. The ink was then transferred to paper by pressing the stone against it.

Senefelders method was perfected over time. Metal plates were soon used in place of stone slabs. Several chemical solutions that repelled water and adhered to ink better than grease were later used. Lithography was used with several different color inks to create color pictures, called lithographs, which were made famous by Currier and Ives.

Photolithography

The invention of photography in the twentieth century spurred the development of a new lithographic process called photolithography. In this method, the printer shines a bright light through a photo negative onto a thin plate coated with light-sensitive chemicals. The areas of the plate struck by the light harden into a reproduced image, serving the same function as the grease design in early lithography. Today, lithographic processes are the most widely-used printing methods.

Lithography and integrated circuits

The same lithographic concepts used to reprint text and pictures on paper can be used to manufacture integrated circuits. In this case, a polymer resist is used to repel the subsequently applied layers of metal conductors, semiconductor materials, and dielectric insulators, which are the ink. An integrated circuit is a tiny version of a conventional electrical circuit. Thin films of various materials act as insulators between conductive material and the silicon metal substrate, or protect existing layers from implantation of other atoms. These devices are built by coating a silicon wafer with patterned layers of material, designed to allow the insulators or protective barriers to be applied, or to leave holes in the barrier layer permitting electrical contact. Sophisticated circuits may require 20 or more layers. Small features and narrow lines must be precisely placed, and the absence of material in a given spot is as critical as the presence of it somewhere else.

There are several ways lithography is used to make integrated circuits, including visible and ultraviolet lithography (forms of photolithography), electron beam patterning, ion beam patterning, and x-ray lithography. The most common method is photolithography, which is well suited to high volume production of consumer electronics.

Making integrated circuits

In the manufacture of integrated circuits, the silicon wafer that acts as the base and a light-sensitive

KEY TERMS

Negative photoresist A type of photosensitve polymer that leaves a barrier only where exposed to light.

Photolithography A method of integrated circuit fabrication that uses a light-sensitive polymer to pattern a silicon wafer with other materials.

Photoresist Photosensitive polymer that is used to pattern silicon wafers during integrated circuit fabrication.

Positive photoresist A type of photosensitive polymer that leaves a barrier only where not exposed to light.

Reticle A photomask used to print patterns on silicon wafers, typically made of chrome-patterned transparent glass.

Stepper A lithographic system that exposes the wafer one small section at a time before stepping to the next location.

Substrate The foundation material on which integrated circuits are built; usually made of silicon.

Wafer A very thin disk of silicon metal on which integrated circuits are built.

polymer material, called photoresist, are used to create the pattern of the circuits layers. Negative photoresists harden when exposed to light, adhering to the base through the developing process. Positive photoresists degrade when they are exposed to light and developed, leaving a depression. The coated wafer is then dried 10 to 30 minutes in an oven at 176 to 194°F (80 to 90°C).

After photoresist is applied to the silicon wafer, it is selectively exposed to light with the aid of a reticle. A reticle consists of a layer of patterned chrome on transparent glass; gaps in the chrome permit light to reach the resist-covered wafer. Exposure takes place in a device, called a stepper, that shines light on the wafer through the transparent regions of the reticle. Only a small region of the wafer is exposed at a time. Then, the wafer is moved, or stepped, forward and a new segment is exposed. After exposure, the wafer is put into developing solution where the positive and unex-posed photoresists are removed. It is hard-baked at temperatures between 248 to 356°F(120 to 180°C).

After the photoresist is in place, a layer of conducting, semiconducting, or insulating metal solution is applied to the wafer and adheres in the pattern opposite to the photoresist. The application and removal of photoresist and metal solutions is repeated 10 to 20 times in the manufacture of a single integrated circuit. In addition to the number of steps needed to make the circuit, the complexity of the task is increased by the necessity for precision in the manufacturing process. For instance, some circuits use printed features as small as 0.35 micron. A human hair, on the other hand, is about 100 microns in diameter.

Resources

BOOKS

Glendinning, William, and John Helbert, eds. Handbook of VLSI Microlithography. Park Ridge, NJ: Noyes Publications, 2001.

Hirsch, S. Carl. Printing from a Stone: The Story of Lithography. New York: Viking Press, 1967.

Jaeger, Richard C. Introduction to Microelectronic Fabrication. Upper Saddle River, NJ: Prentice Hall, 2002.

Kristin Lewotsky

Lithography

views updated May 23 2018

Lithography

Lithography is a method of printing an image by applying patterned layers of color to paper with a series of etched metal or stone plates. This is the process used to print many newspapers and multi-colored lithographs. It is also the general name for the techniques used to fabricate integrated circuits (ICs).


Lithography in printing

The concept of lithography was developed by German Aloys Senefelder in 1796. He used a stone slab with printed grease marks and dampened it with water . When a coating of ink was applied to the stone, it adhered to the grease marks and washed away from the wet areas. The ink was then transferred to paper by pressing the stone against it.

Senefelder's method was perfected over time . Metal plates were soon used in place of stone slabs. Several chemical solutions that repelled water and adhered to ink better than grease could were experimented with. Lithography was used with several different color inks to create color pictures, called lithographs, which were made famous by Currier and Ives.


Photolithography

The invention of photography in the twentieth century spurred the development of a new lithographic process called photolithography. In this method, the printer shines a bright light through a photo negative onto a thin plate coated with light-sensitive chemicals. The areas of the plate struck by the light harden into a reproduced image, serving the same function as the grease design in early lithography. Today, lithographic processes are the most widely-used printing methods.


Lithography and integrated circuits

The same lithographic concepts used to reprint text and pictures on paper can be used to manufacture integrated circuits. In this case, a polymer resist is used to repel the subsequently applied layers of metal conductors, semiconductor materials, and dielectric insulators which are the "ink." An integrated circuit is a tiny version of a conventional electrical circuit. Thin films of various materials act as insulators between conductive material and the silicon metal substrate, or protect existing layers from implantation of other atoms . These devices are built by coating a silicon wafer with patterned layers of material, designed to allow the insulators or protective barriers to be applied, or to leave holes in the barrier layer permitting electrical contact. Sophisticated circuits may require 20 or more layers. Small features and narrow lines must be precisely placed, and the absence of material in a given spot is as critical as the presence of it somewhere else.

There are several ways lithography is used to make integrated circuits, including visible and ultraviolet lithography (forms of photolithography), electron beam patterning, ion beam patterning, and x-ray lithography. The most common method is photolithography, which is well suited to high volume production of consumer electronics .


Making integrated circuits

In the manufacture of integrated circuits, the silicon wafer that acts as the base and a light-sensitive polymer material, called photoresist, are used to create the pattern of the circuit's layers. Negative photoresists harden when exposed to light, adhering to the base through the developing process. Positive photoresists degrade when they are exposed to light and developed, leaving a depression. The coated wafer is then dried 10-30 minutes in an oven at 176–194°F (80–90°C).

After photoresist is applied to the silicon wafer, it is selectively exposed to light with the aid of a reticle. A reticle consists of a layer of patterned chrome on transparent glass ; gaps in the chrome permit light to reach the resist-covered wafer. Exposure takes place in a device, called a stepper, that shines light on the wafer through the transparent regions of the reticle. Only a small region of the wafer is exposed at a time. Then the wafer is moved, or stepped, forward and a new segment is exposed. After exposure, the wafer is put into developing solution where the positive and unexposed photoresists are removed. It is hard-baked at temperatures between 248–356°F (120–180°C).

After the photoresist is in place, a layer of conducting, semiconducting, or insulating metal solution is applied to the wafer and adheres in the pattern opposite to the photoresist. The application and removal of photoresist and metal solutions is repeated 10-20 times in the manufacture of a single integrated circuit. In addition to the number of steps needed to make the circuit, the complexity of the task is increased by the necessity for precision in the manufacturing process. For instance, some circuits use printed features as small as 0.35 micron. A human hair, on the other hand, is about 100 microns in diameter.

Resources

books

Glendinning, William, and John Helbert, eds. Handbook of VLSI Microlithography. Park Ridge, NJ: Noyes Publications, 1991.

Jaeger, Richard. Introduction to Microelectronic Fabrication. New York, NY: Addison-Wesley, 1988.


Kristin Lewotsky

KEY TERMS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Negative photoresist

—A type of photosensitve polymer that leaves a barrier only where exposed to light.

Photolithography

—A method of integrated circuit fabrication that uses a light-sensitive polymer to pattern a silicon wafer with other materials.

Photoresist

—Photosensitive polymer that is used to pattern silicon wafers during integrated circuit fabrication.

Positive photoresist

—A type of photosensitive polymer that leaves a barrier only where not exposed to light.

Reticle

—A photomask used to print patterns on silicon wafers, typically made of chrome-patterned transparent glass.

Stepper

—A lithographic system that exposes the wafer one small section at a time before 'stepping' to the next location.

Substrate

—The foundation material on which integrated circuits are built; usually made of silicon.

Wafer

—A very thin disk of silicon metal on which integrated circuits are built.

Lithography

views updated May 21 2018

Lithography

Sources

Scientific Process. The technology involved in lithography was developed by a Bavarian named Alois Senefelder in 1795. It spread to France in 1816 and by 1822 was being used in London. In the United States, Bass Otis, a student of the great portrait painter Gilbert Stuart, began to experiment with the new techniques sometime around 1819. Lithography was a delicate technique that required a particular kind of stone, imported from Bavaria, on which the artist drew using special crayons. When the design was finished, the stone would be bathed in gum and acids which would harden the crayon

design and cause it to stand out in relief, turning the stone into a plate that, when wet and inked, could be pressed onto paper to make a print.

Publishing. Before lithography was introduced, pictures in books and magazines were reproduced from copperplate engravings or from woodcuts, which were slow and difficult processes. Lithography made book and magazine illustration easier and less expensive. More and more, authors were able to add illustrations to their books, a step that subtly altered how literature was received. Magazine editors were able to vary the visual appeal of their products so that Godeys Ladys Book, for example, could draw on lithographic technology to print fashion plates and other illustrated material for its readers. Sheet-music publishers also capitalized on the new technology, packaging songs with illustrations that suggested their contents.

Currier and Ives. Nathaniel Currier got his start in 1828 as apprentice to William and John Pendleton of Boston, the first American company to make lithography a commercial success. Eventually Currier settled in New York and established his own business at 1 Wall Street in 1835. Curriers company, later known as Currier and Ives after James M. Ives, a skilled business manager and self-educated artist, joined the firm in 1852, billed itself as offering Colored Engravings for the People. Over the years Currier and Ives offered a wide range of prints; today the collection of known Currier and Ives prints totals over seven thousand illustrations. Prints included views of city and country locations; political cartoons and banners; portraits of American and European celebrities and political figures; illustrations of historical events; blank certificates for birth, marriage, church membership, or death; country and pioneer home scenes; sheet music; nature scenes; and pictures of trains, horses (a Currier and Ives specialty), and sporting events. To produce this enormous range of illustrations, produced at a rate of three per week, Currier and Ives relied on various artists. The company regularly bought drawings as they were offered, hired artists as full-time staff members, and, on occasion, hired independent lithographers.

Art for the Masses. Lithographic prints produced by Currier and Ives and other lithographers were an important way of disseminating art to the American public. The many Americans unable to afford original art could own reproductions produced and distributed by lithographers, a development that some criticized as a devaluation of art itself. The drawing involved in lithography also provided jobs for would-be artists to supplement the portrait painting or teaching that artists typically did in order to support their more-idealistic endeavors. Ironically, while the mass production of art threatened to outdo or overshadow the ideal of individual artistic production, at the same time it provided artists with the means they needed to earn a living while they worked on more-ambitious individual projects.

Sources

Harry T. Peters, Currier & Ives: Printmakers to the People (Garden City, N.Y.: Doubleday, 1942);

John W. Reps, Views and Viewmakers of Urban America: Lithographs of Towns and Cities in the United States and Canada, Notes on the Artists and Publishers, and a Union Catalog of Their Work, 18251925 (Columbia: University of Missouri Press, 1984).

lithology

views updated May 18 2018

li·thol·o·gy / liˈ[unvoicedth]äləjē/ • n. the study of the general physical characteristics of rocks. Compare with petrology. ∎  the general physical characteristics of a rock or the rocks in a particular area: the lithology of South Dakota.DERIVATIVES: lith·o·log·ic / ˌli[unvoicedth]əˈläjik/ adj.lith·o·log·i·cal / ˌli[unvoicedth]əˈläjikəl/ adj. lith·o·log·i·cal·ly / ˌli[unvoicedth]əˈläjik(ə)lē/ adv.

lithography

views updated May 29 2018

li·thog·ra·phy / liˈ[unvoicedth]ägrəfē/ • n. the process of printing from a flat surface treated so as to repel the ink except where it is required for printing. ∎ Electr. an analogous method for making printed circuits.DERIVATIVES: li·thog·ra·pher / -fər/ n.

lithography

views updated May 11 2018

lithography In art, method of printing from a flat, inked surface. In traditional lithography, invented in the 1790s, the design is made on a prepared plate or stone with a greasy pencil, crayon, or liquid. Water applied to the surface is absorbed where there is no design. Oil-based printing ink, rolled over the surface, sticks to the design, but not to the moist areas. Pressing paper onto the surface produces a print.

Lithology

views updated May 21 2018

Lithology

Lithology is the study of rocks, emphasizing their macroscopic physical characteristics, including grain size, mineral composition, and color. Lithology and its related field, petrography (the description and systematic classification of rocks), are subdisciplines of petrology, which also considers microscopic and chemical properties of minerals and rocks as well as their origin and decay.

lithology

views updated May 08 2018

lithology The description of the macroscopic features of a rock, e.g. its texture or petrology.