Propane

views updated May 29 2018

Propane

Background

Propane is a naturally occurring gas composed of three carbon atoms and eight hydrogen atoms. It is created along with a variety of other hydrocarbons (such as crude oil, butane, and gasoline) by the decomposition and reaction of organic matter over long periods of time. After it is released from oil fields deep within Earth, propane is separated from other petrochemicals and refined for commercial use. Propane belongs to a class of materials known as liquefied petroleum gases (LPGs), which are known for their ability to be converted to liquid under relatively low pressures. As a liquid, propane is 270 times more compact than it is as a gas, which allows it to be easily transported and stored as a liquid until ready for use. Approximately 15 billion gal (57 billion L) of propane are consumed annually in the United States as a fuel gas. The greatest consumers are the chemical and manufacturing industries, which use propane as chemical intermediates and aerosol propellants, followed by residential homes and commercial establishments, who use propane for heating and in dryers and portable grills.

The value of petroleum products has long been recognized by the civilized world, with documented examples of their use stretching back more than 5,000 years. The ancient Mesopotamians used petroleum-derived tar-like compounds for many applications, including caulking for masonry and bricks and adhesives for jewelry. About 2,000 years ago Arabian scientists learned one of the basic tenets of petroleum chemistry—that it can be distilled or separated into different parts, or fractions, based on their boiling points, and that each fraction has its own distinctive properties.

The modern era of refining is considered to have begun in 1859, when petroleum was found in Pennsylvania and the Sennaca Oil Company drilled the first oil well there. From a depth of 70 ft (21.2 m) the world's first oil well produced nearly 300 tons (305 metric tons) of oil in its first year, and thus an entire industry was born. Propane was first recognized as an important component of petroleum in 1910, when a Pittsburgh motor car owner asked chemist Dr. Walter Snelling why the gallon of gasoline he had purchased was half gone by the time he got home. The car owner thought the government should investigate why consumers were being cheated, because the gasoline was evaporating at a rapid and expensive rate. Snelling discovered a large part of liquid gasoline was actually composed of propane, butane, and other hydrocarbons. Using coils from an old hot water heater and other miscellaneous pieces of laboratory equipment, Snelling built a still that could separate the gasoline into its liquid and gaseous components. Since the days of Snelling, chemists have made tremendous advances in techniques for processing propane and other LPGs. Today, the manufacture of propane gas is an $8 billion industry in the United States.

Raw Materials

Because propane has natural origins, it is not "made" of other raw materials; instead, it is "found" in petroleum chemical mixtures deep within the earth. These petroleum mixtures are literally rock oil, combinations of various hydrocarbon-rich fluids which accumulate in subterranean reservoirs made of porous layers of sandstone and carbonate rock. Petroleum is derived from various living organisms buried with sediments of early geological eras. The organisms were trapped between rock layers without oxygen and could not break down, or oxidize, completely. Instead, over tens of millions of years, the residual organic material was converted to propane-rich petroleum via two primary processes, diagenesis and catagenesis. Diagenesis occurs below 122°F (50°C) when the organic "soup" undergoes microbial action (and some chemical reactions) which result in dehydration, condensation, cyclization, and polymerization. Catagenesis, on the other hand, occurs under high temperatures of 122-424°F (50-200°C) and causes the organic materials to react via thermocatalytic cracking, decarboxylation, and hydrogen disproportionation. These complex reactions form petroleum in the sedimentary rocks.

The Manufacturing
Process

Propane manufacture involves separation and collection of the gas from its petroleum sources. Propane and other LPGs are isolated from petrochemical mixtures in one of two ways—by separation from the natural gas phase of petroleum and by refinement of crude oil.

  1. Both processes begin when underground oil fields are tapped by drilling oil wells. The gas/oil hydrocarbon mixture is piped out of the well and into a gas trap, which separates the stream into crude oil and "wet" gas, which contains natural gasoline, liquefied petroleum gases, and natural gas.
  2. Crude oil is heavier and sinks to the bottom of the trap; it is then pumped into an oil storage tank for later refinement. (Although propane is most easily isolated from the "wet gas" mixture, it can be produced from crude oil. Crude oil undergoes a variety of complex chemical processes, including catalytic cracking, crude distillation, and others. While the amount of propane produced by refinery processing is small compared to the amount separated from natural gas, it is still important because propane produced in this manner is commonly used as a fuel for refineries or to make LPG or ethylene.)
  3. The "wet" gas comes off the top of the trap and is piped to a gasoline absorption plant, where it is cooled and pumped through an absorption oil to remove the natural gasoline and liquefied petroleum gases. The remaining dry gas, about 90% methane, comes off the top of the trap and is piped to towns and cities for distribution by gas utility companies.
  4. The absorbing oil, saturated with hydrocarbons, is piped to a still where the hydrocarbons are boiled off. This petroleum mixture is known as "wild gasoline." The clean absorbing oil is then returned to the absorber, where it repeats the process.
  5. The "wild gasoline" is pumped to stabilizer towers, where the natural liquid gasoline is removed from the bottom and a mixture of liquefied petroleum gases is drawn off the top.
  6. This mixture of LP gases, which is about 10% of total gas mixture, can be used as a mixture or further separated into its three parts—butane, isobutane, and propane (about 5% of the total gas mixture).

Quality Control

As described above, propane must be carefully isolated from a complex mixture of petrochemicals which includes methane, ethane, ethene, propene, isobutane, isobutene, butadiene, pentane, and pentene, to name a few. If such impurities are not removed, the propane or propane and butane mixture will not liquefy properly. Liquefaction at appropriate temperature and pressure is critical for the gas to be economically useful. The liquefied gas industry has established standardized specifications that LPG mixtures must conform to in order to be considered acceptable for use as fuel gas. Standardized test methodologies for evaluating these specifications are approved and published by the American Society for Testing and Materials (ASTM). For example, the LPG known as "commercial propane" must have a maximum vapor pressure of 200 psig at 100°F (38°C) and can have no more than 0.0017 ounces (0.05 ml) of residual matter. Furthermore, the allowed amount of volatile residue is strictly limited, and the gas must meet established guidelines for corrosivity to copper, volatile sulfur content, and moisture. Other mixtures of propane and butane are commercially available which have slightly different target values.

These tightly held quality standards make propane an environmentally attractive fuel. In fact, to meet pipeline standards, nearly all pollutants are removed from propane before it is allowed to enter pipelines. When used in properly adjusted and maintained burners, propane's emissions easily meet the standards for clean air set by the Environmental Protection Agency (EPA). Their testing has proven that propane is environmentally safer than other hydrocarbon energy sources, and that properly processed propane can be used as a motor fuel which is significantly cleaner than gasoline. Studies have shown that, compared to gasoline, propane engines have as much as 45% less ozone-forming potential. Results of another recent EPA study show propane reduces total hydrocarbon emissions by 29% according to the new Federal Clean Air Standards. Furthermore, carbon monoxide emissions are 93% below the standard, hydrocarbon emissions are 73% below the standard, and nitrogen oxide emissions are 57% below the standard.

Byproducts/Waste

As detailed above, the manufacture of propane produces a variety of byproducts that are economically useful. Actually, it is more accurate to think of these not as byproducts but as co-products, since they are produced along with propane as part of petroleum refinement. These co-products may be in the form of solids, gases, or liquids. Solids (or semisolids) include bitumes, hydrogen sulfide, and carbon dioxide and are sold for fuel purposes. The liquid fractions include crude oil, which is further refined to give a variety of products. These oils vary dramatically in appearance and physical properties like boiling point, density, odor, and viscosity. The different fractions of crude oil are referred to as "light" or "heavy" depending on their density. Light crude is rich in low-boiling and paraffinic hydrocarbons; heavy crudes are higher-boiling and more viscous. They yield a variety of asphalt-like molecules. Many of the co-products of propane production, such as propylene and butylene, are useful in gasoline refining, synthetic rubber manufacture, and the production of petrochemicals.

The Future

As the field of petroleum chemistry evolves, propane chemistry will continue to advance. Improvements will be made in the way propane is separated from petroleum. One area that offers opportunity for advancement is in the area of oil well production. Much natural gas is burned at remote oil wells because the extensive piping system required to transport it is prohibitively expensive. There are efforts underway to convert more of this wasted gas to condensable gases, which could be easily stored and transported. It is also important to note that propane is likely to become increasingly popular as a fuel gas based on economic factors and enviromnental concerns. In fact, in the Clean Air Act of 1990 Congress named LPGs as one of the clean-burning alternative fuels designated to take national air quality into the twenty-first century.

Where to Learn More

Books

Clark, William, ed. Handbook of Butane! Propane Gases. Butane-Propane News, Inc., 1972.

Other

National Propane Gas Association. http://www.propanegas.com/npga/ (July 14,1997).

RandySchueller

Propane

views updated Jun 27 2018

Propane

OVERVIEW

Propane (PRO-pane) is a colorless gas with an odor of natural gas. It occurs naturally in petroleum and natural gas. It belongs to the alkane family of organic compounds, compounds consisting of only carbon and hydrogen, all joined by single bonds. Propane is commonly sold as fuel, often available in a liquefied form known as liquid propane gas, or LPG.

KEY FACTS

FORMULA:

C3H8

ELEMENTS:

Carbon, hydrogen

COMPOUND TYPE:

Alkane; saturated hydrocarbon; organic

STATE:

Gas

MOLECULAR WEIGHT:

44.10 g/mol

MELTING POINT:

−187.63°C (−323.73°F)

BOILING POINT:

−42.1°C (−43.8°F)

SOLUBILITY:

Slightly soluble in water; soluble in ethyl alcohol, ether, benzene

HOW IT IS MADE

Propane is most widely available as a component of petroleum and natural gas, fossil fuels that formed many millions of years ago when marine organisms died, sank to the bottom of seas, and were eventually buried under massive layers of debris. The decay of those organisms without access to oxygen resulted in the formation of so-called fossil fuels: natural gas, petroleum, and coal. All fossil fuels are complex mixture of some free carbon and a very large variety of hydrocarbons. Natural gas, for example, consists primarily of methane, ethane, and propane.

Roughly half of all the propane produced in the United States comes from petroleum gases produced during the refining of crude oil and half from natural gas. The mixture of gases from either refined petroleum or natural gas is liquefied and then allowed to boil off, changing back to the original gases. Each gas boils off at its characteristic boiling point and can be captured and removed as it escapes from the liquid mixture. Often, propane is allowed to remain in its liquid state and is then made available as liquid propane gas (LPG). LPG is easier to store and transport than is gaseous propane.

Interesting Facts

Propane's natural odor is so faint that it can often not be detected when leaks occur. To avoid the problem of unexpected fires and explosions, manufacturers usually add a compound with a strong odor, such as ethanediol, to make leaks more noticeable.

COMMON USES AND POTENTIAL HAZARDS

About 100 billion liters (27 billion gallons) of propane were produced in the United States in 2004. The largest portion of that output (45 percent) was used for space heating, water heating, the operation of appliances, and other purposes in commercial and residential buildings. Propane has many advantages as a fuel:

  • It produces less pollution than gasoline or coal.
  • Propane water heaters are less expensive to purchase and operate than are electric water heaters, and they can heat more water than electric heaters.
  • Propane fireplaces are less expensive and less polluting than wood-burning fireplaces, and they can be turned on and off with a switch.
  • Many professional cooks prefer propane stoves to electric stoves because they heat instantly and are easier to control.
  • Propane dryers take three-quarters of the time of electric dryers to dry the same amount of clothes.
  • Propane appliances continue to operate during power outages, unlike electric appliances.

The second most important application of propane is in the petrochemical industry where the compound is used for the production of a host of organic chemicals, primarily ethylene and propylene. Ethylene and propylene are two important compounds used in the production of plastics and other kinds of polymers. They ranked third and sixth on the list of the largest volume chemicals produced in the United States in 2004.

Farm use and industrial use follow next in importance, each accounting for about 7 percent of the propane used in the United States each year. On farms, propane is used to operate farm equipment and irrigation systems, to dry crops, and to help control weeds. In industries, the compound is used for space heating, for soldering, for cutting and treating metals, and as a fuel for fork lifts. Finally, a relatively small amount of propane is used as a fuel for cars, trucks, and other vehicles. Many people argue that more vehicles should be built to operate on propane because the gas produces fewer pollutants, reduces wear and tear on engines, and burns more efficiently than gasoline. So far, however, propane-powered vehicles have not become very popular in the United States. In the early 2000s, there were about 350,000 propane-powered vehicles in the United States and about 4 million in the world.

In moderate amounts, propane presents no health hazards to humans. In larger quantities, it may have a narcotic effect, producing drowsiness, disorientation, headaches, and confusion. The gas is both flammable and explosive and requires special care when being used.

Words to Know

ALKANE
One of a family of organic compounds consisting of only carbon and hydrogen, all joined by single bonds.
POLYMER
A compound consisting of very large molecules made of one or two small repeated units called monomers.

FOR FURTHER INFORMATION

"Facts about Propane." National Propane Gas Association. http://www.npga.org/files/public/Facts_About_Propane.pdf (accessed on November 3, 2005).

"Propane." Air Liquide. http://www.airliquide.com/en/business/products/gases/gasdata/index.asp?GasID=53 (accessed on November 3, 2005).

"Propane Education and Research Council." http://www.propanecouncil.org/ (accessed on November 3, 2005).

"Propane: Exceptional Energy." http://www.usepropane.com (accessed on November 3, 2005).

"/Propane: What is Propane?" Vehicle Buyer's Guide for Consumers. http://www.eere.energy.gov/cleancities/vbg/consumers/lpg.shtml (accessed on November 3, 2005).

Sherman, Josepha, and Steve Brick. Fossil Fuel Power. Mankato, Minn.: Capstone Press, 2003.

See AlsoEthylene; Methane; Propylene

propane

views updated May 29 2018

propane Colourless, flammable gas (C3H8), the third member of the alkane series of hydrocarbons. It occurs in natural gas, from which it is obtained; it is also obtained during petroleum refining. Propane is used (as bottled gas) as a fuel, as a solvent and in the preparation of many chemicals. Properties: m.p. −190°C (−310°F); b.p. −42°C (−43.6°F).

propane

views updated May 18 2018

pro·pane / ˈprōˌpān/ • n. Chem. a flammable hydrocarbon gas, C3H8, of the alkane series, present in natural gas and used as bottled fuel.