Steel Industry

views updated

STEEL INDUSTRY


Steel is an alloy of carbon and iron that is harder and stronger than iron. While the first ironworks were established in British North America in Jamestown, Virginia (1621), the U.S. steel industry did not develop on its own until after the American Civil War (1861–1865). Up until that time steel was too expensive to manufacture by the methods then available. Its use prior to the American Civil War was confined primarily to high-value products, and the United States imported nearly all of its steel until after the American Civil War.

The coming of the steam age in the early part of the nineteenth century created a huge demand for iron. Up to this time most iron mines, forges, and blacksmiths were small operations. Steam created a demand for rolled iron to be used in making boilers. Using iron boilers, as the railroads and paddle-wheel river boats of the time did, was dangerous because the iron was not strong enough to contain the steam pressure and they often blew up, causing death and carnage. In addition, more than 30,000 miles of railroad track with iron rails were laid in the United States between 1830 and the beginning of the American Civil War. As a result iron mills became major enterprises, but the iron rails frequently warped because of temperature extremes, causing derailments.

Two inventions in the 1850s resulted in the rapid rise of the steel industry, which supplanted the iron industry by the end of the nineteenth century. One was the Bessemer process for making steel, developed by British engineer Henry Bessemer in 1856. The second was the Siemens-Martin open-hearth method, introduced in 1858. These processes, once perfected, greatly reduced the cost of producing steel. The first Bessemer converter in the United States was built in 1864, and the first open-hearth furnace, which was better suited to American iron ore, was built in 1868, and they both spurred steel production in the United States. By 1873 the United States was producing nearly 115,000 tons of steel rail, approximately one-eighth of all U.S. steel production. As the price of steel continued to drop, steel rails replaced iron rails. The "iron age" was over.


Between 1880 and 1900 U.S. steel production increased from 1.25 million tons to more than 10 million tons. The industry underwent consolidation as mill owners sought to benefit from economies of scale and to avoid what they called "ruinous competition." Led by Andrew Carnegie, Henry Clay Frick, Charles Schwab, and others, the modern steel industry took shape. It was a period of violent labor disputes, most notably the Homestead strike of 1892. The companies managed to hold off unionization until the 1930s. In 1901 financiers J. Pierpont Morgan and Elbert H. Gary formed the United States Steel Corporation. With a capitalization of $1.4 billion, it was the largest industrial enterprise in the world. By 1910 the United States was producing more than 24 million tons of steel, far more than any other country. Until well after World War II (1939–1945), the steel industry would be the measure of the nation's economy.

In 1969 U.S. steel production peaked at more than 141 million tons. It was a time when international competition, led by newer and more efficient Japanese and European steel plants and by lower labor and transportation costs, began to challenge the U.S. domestic steel industry. The industry underwent a major shakeout in the early 1970s, and by 1975 U.S. steel production had fallen to 89 million tons. The industry suffered a major depression from 1982 to 1986. By 1988 production was up to more than 102 million tons, with greater efficiencies resulting in a smaller but more productive workforce. Then in 1991 it slipped to less than 90 million tons as an economic recession set in.

During the 1990s, restructuring, increased automation, new production techniques and upgraded facilities made U.S. steel-makers more productive. In the early 1990s approximately three-quarters of all U.S. steel production was accounted for by traditional integrated steel mills, which undertook every step of the steel making process, converting mixtures of iron ore, limestone, and coke (made from coal) into molten iron using a blast furnace. The molten iron was then converted into steel using basic oxygen furnaces (BOFs), after which the steel was cast into ingots and shaped. Some mills utilized a process called continuous casting that bypassed the production of ingots. The top six firms accounted for $25 billion worth of steel, or 40 percent of all shipments in 1992.

A second, fast-growing steel producer, known as "minimills," accounted for one-quarter of U.S. steel production in the early 1990s. Minimills are nonintegrated mills that feed scrap iron or steel into an electric arc furnace (EAF) rather than a blast or basic oxygen furnace. By 1997 minimills had the capacity to produce in excess of 50 million tons per year of carbon, alloy, and specialty steels—more than 40 percent of the total U.S. raw steelmaking capacity of 120 million annual tons. About 80 firms operated more than 100 scrap-fed electric steel plants in the U.S. in 1997. Minimills were projected to account for nearly half of all steel buyers' needs by 2000.

By the mid-1990s the U.S. steel industry was in good economic shape. From 1992 to 1998 it spent an aggregate of $50 billion to modernize its plants, and steel companies improved their financial position by reducing debt, underfunded pension plans, and other liabilities. After two strong years industry performance slackened slightly in 1996 as some plants suffered breakdowns after running at full capacity. Raw steel production during 1996 was 99.4 million tons, up from 97.1 million tons in 1995. Steel shipments rose in 1997 to 105.9 million net tons, then fell 3.5 percent in 1998 to 102.1 million tons.

Strong demand in the United States for steel in 1997 and 1998 resulted in a significant increase in imported steel of various kinds. Cheap imports from Russia, Japan, Brazil, and other countries forced the price of commodity grade steel down more than 10 percent in just a few weeks. To prevent other countries from dumping steel into the United States market, the U.S. steel industry could file antidumping petitions with the U.S. International Trade Commission, under the U.S. Department of Commerce, and the International Trade Administration. ("Dumping" refers to the practice of one country selling commodities or finished products in another country at below cost or fair market value.)

Since 1980 the steel industry used antidumping complaints as a tool to curb imports, and in 1998 it filed complaints against Japan, Russia, and Brazil. However, the wave of imported steel, coupled with a projected slowdown in the growth rate of the U.S. economy and excess world steel producing capacity, signaled that 1999 would see a decline in the U.S. steel industry.

See also: Bessemer Process, Andrew Carnegie

FURTHER READING

Boselovic, Len. "Tidal Wave of Cheap Steel Imports Sends Industry into Tailspin." Knight-Ridder/Tribune News, October 14, 1998.

Carter, Walter F. "Steel Industry Facing Declines in '99." American Metal Market, January 20, 1999.

Hall, Christopher. Steel Phoenix: The Fall and Rise of the U.S. Steel Industry. New York: St. Martin's Press, 1997.

Livesay, Harold C. Andrew Carnegie and the Rise of Big Business. Boston: Little, Brown, 1975.

Misa, Thomas J. A Nation of Steel: The Making of Modern America, 1865–1925. Baltimore, MD: Johns Hopkins University Press, 1995.

Paskoff, Paul F., ed. Iron and Steel in the Nineteenth Century. New York: Facts on File, 1989.

by 1910 the united states was producing more than 24 million tons of steel, by far more than any other country. until well after world war ii, the steel industry would be the measure of the nation's economy.

More From encyclopedia.com