wire
wire metal filament, strand, or solid rod usually having a round cross section. Metals and alloys used for wiremaking are chosen for high tensile strength and ductility or for their electrical conductivity, weight, melting point, or other properties, depending upon the use to which the wire is to be put. The size of a wire is the measure of its diameter. For convenience, the different wires are numbered in order of decreasing size, the number being known as the gauge, or gage; the higher the gauge the smaller the diameter. The number of gauges used and their sizes differ according to the kind of wire and the country's standards of measurement. In the United States the American wire gauge, known also as the Brown & Sharpe wire gauge (abbr. B. & S.), is used; in Great Britain and Canada the British, or imperial, standard wire gauge (S.W.G.) is employed. For steel wire the steel wire gauge (also known as the Washburn & Moen, the Roebling, or the American Steel & Wire Co.'s wire gauge) is employed. Wire is widely used in conducting electricity and in making fencing, screens, netting, springs, and mesh or cloth. Very thin wire is used in various scientific instruments. A wire mesh is often used in glass (wire glass) to prevent shattering and to increase strength and safety. Wire rope (cable) is made by forming wires into strands that are then wound on a core. Wire has been used since the 3d millennium BC In early times the metal was hammered into sheets, then cut in strips and shaped with hammer and file. The modern method of drawing wire is believed to have originated in Europe late in the 13th cent. In this process the metal is pulled, or drawn, through a number of holes, each smaller than the one preceding, until finally it is passed through the hole having the desired diameter. Metal plates with such holes are known as drawplates or dies. Success in drawing wire through the drawplate formerly depended upon the physical strength of the wiredrawer (or wiresmith), since machinery was not used until the introduction of power-driven cylinder blocks to pull and coil the wire. With the establishment of telegraph lines in the late 1800s, the production of wire expanded into one of the greatest industries of the 19th cent.
|
|
Cite this article
Pick a style below, and copy the text for your bibliography.
|
wire
The Oxford Pocket Dictionary of Current English
|
2009
| © The Oxford Pocket Dictionary of Current English 2009, originally published by Oxford University Press 2009. (Hide copyright information)
Copyright
wire
/ wīr/
•
n.
1.
metal drawn out into the form of a thin flexible thread or rod.
∎
a piece of such metal.
∎
a length or quantity of wire used, for example, for fencing or to carry an electric current.
∎ Horse Racing
a wire stretched across and above the track at the finish line of a racetrack.
∎
an electronic listening device that can be concealed on a person.
2.
inf.
a telegram or cablegram.
•
v. [tr.]
1.
install electric circuits or wires in:
wiring a plug
they wired the place themselves.
∎
connect (someone or something) to a piece of electronic equipment:
a microphone wired to a loudspeaker.
2.
provide, fasten, or reinforce with wires:
they wired his jaw.
3.
inf.
send a telegram or cablegram to:
she wired her friend for advice.
∎
send (money) to (someone) by means of a telegram or cablegram:
he was expecting a friend in Australia to wire him $1,500.
4.
snare (an animal) with wire.
5.
(usu. be wired) Croquet
obstruct (a ball, shot, or player) by a wicket.
PHRASES: by wire
by telegraph.down to the wire inf.
used to denote a situation whose outcome is not decided until the very last minute:
it was probable that the test of nerves would go down to the wire.get one's wires crossedsee cross.under the wire inf.
at the last possible opportunity; just in time.DERIVATIVES: wir·er
n.
ORIGIN: Old English wīr, of Germanic origin, probably from the base of Latin viere ‘plait, weave.’
|
|
Cite this article
Pick a style below, and copy the text for your bibliography.
|
wire
wire Strand of metal made by drawing a rod through progressively smaller holes in metal dies. The drawing process toughens steel, so that a cable made from steel wire is much stronger than an undrawn steel rod of the same diameter. Copper and aluminium wires are used to make electric cables. If flexibility is important, each conductor is made of several fine strands of wire.
|
|
Cite this article
Pick a style below, and copy the text for your bibliography.
|