Pulmonary function tests

Definition

Pulmonary function tests are a group of procedures that measure how well the lungs are functioning.

Purpose

Pulmonary function tests help a doctor to diagnose respiratory diseases and disorders such as asthma , chronic obstructive pulmonary disease (COPD), and emphysema, and mechanical injury by measuring the degree of lung impairment. These tests are also done before major lung surgery to make sure the patient will not be disabled by having a reduced lung capacity. When performed over time, these tests are helpful in evaluating how a lung disease is progressing, and how serious the lung disease has become. They are also be used to assess how a patient is responding to different treatments.

Description

There are many types of pulmonary function tests. The most common are:

• peak expiratory flow rate (PEFR) measures airflow during forced expirations
• forced vital capacity (FVC) measures the maximum amount of air exhaled after taking a deep breath
• forced expiratory volume in one second (FEV1) measures the amount of air that can be exhaled in one second
• maximum voluntary volume (MVV) measures the amount of air a person can breathe in and out in one minute
• total lung capacity (TLC) is the measure of the amount of air the lungs can hold
• residual volume (RV) is the amount of air left in the lungs after forced expiration
• arterial blood gas (ABG) measures the amount of oxygen and carbon dioxide in the blood and gives a picture of how efficiently the lungs are functioning
• pulse oximetry measures the percentage of oxygen in the blood

With the exception of arterial blood gas, pulse oximetry, and total lung capacity, pulmonary function tests are performed using spirometry (from the Greco-Latin term meaning "to measure breathing"). Spirometry tests can be done a hospital or doctor's office. The patient places a clip over the nose and breathes through the mouth into a tube connected to a machine called a spirometer. The patient breathes in deeply, and then exhales as quickly and forcefully as possible into the tube. The machine records the volume of air that moves through the tube. The exhalation must last at least six seconds for the machine to work properly. Usually the patient repeats this test three times, and the best of the three results is considered the measure of the lung function. A similar machine called a peak flow meter may be used to measure PERF. Sometimes when airways are obstructed, the patient is given a bronchodilator, and the test is performed again.

Total lung capacity is measured by body plethysmography. The patient sits in a sealed box that resembles a telephone booth and breathes against a mouthpiece. A device measures the changes in air pressure in the box during inhalation and exhalation. From these air pressure measurements, the total capacity of the lungs can be calculated.

Arterial blood gases are measured on a blood sample that is taken from an artery. Pulse oximetry uses a sensor placed on the earlobe or fingertip to measure the amount of oxygen in the blood.

Taken together, pulmonary function tests give a good picture of how much air is moving in and out of the lungs and how efficiently oxygen is moved into the blood and carbon dioxide is moved out. Some of these tests are performed as part of a routine health screening, while others are used most often to evaluate the condition of diseased or damaged lungs.

Precautions

Except for the arterial blood gas tests and pulse oximetry, pulmonary function tests should not be given to patients who have had a recent heart attack, or who have certain other types of heart disease. Conditions that cause pain on breathing, such as broken ribs, may interfere with the performance of the tests and produce inaccurate results. Children must be old enough to follow directions and inhale and exhale as instructed.

Preparation

The patient should not eat a heavy meal before the test, nor smoke for four to six hours beforehand. The doctor will give specific instructions about whether or not to use medications before the test.

Aftercare

No special aftercare is needed following these tests.

Risks

Risks with these tests are minimal. However, some people become lightheaded or faint. The tests may also trigger an asthma attack in individuals with asthma.

Parental concerns

Normal results are based on a person's age, height, and gender. Normal results are expressed as a percentage of the predicted lung capacity. Results of 80 percent or less suggest some sort of lung impairment.

KEY TERMS

Artery —A blood vessel that carries blood away from the heart to the cells, tissues, and organs of the body.

Bronchodilator —A drug that when inhaled helps to expand the airways.

Carbon dioxide —A heavy, colorless gas that dissolves in water.

Forced exhalation —Blowing as much air out of the lungs as possible.

Resources

BOOKS

Pulmonary Function Testing and Cardiopulmonary Stress Testing. Delmar Publishing, 1997.

Ruppel, Gregg L. Manual of Pulmonary Function Testing. St. Louis: Mosby, 1997.

WEB SITES

Blaivas, Allen J." Pulmonary Function Tests." MedlinePlus Encyclopedia. 27 January 2004. <www.nim.nih.gov/medlineplus/ency/article/003853.htm>.

HealthGuide A-Z "Lung Function Tests" WebMD.com 5 May 2003. <my.webmd.com/hw/health_guide_atoz/hw5022.asp?lastselectedguid+{5FE84E90-BC77-4056-A91C-9}>.

Tish Davidson, A.M. Carol A. Turkington

Pulmonary Function Test

Definition

Pulmonary function tests are a group of procedures that measure the function of the lungs, revealing problems in the way a patient breathes. The tests can determine the cause of shortness of breath and may help confirm lung diseases, such as asthma, bronchitis or emphysema. The tests also are performed before any major lung surgery to make sure the person won't be disabled by having a reduced lung capacity.

Purpose

Pulmonary function tests can help a doctor diagnose a range of respiratory diseases which might not otherwise be obvious to the doctor or the patient. The tests are important since many kinds of lung problems can be successfully treated if detected early.

The tests are also used to measure how a lung disease is progressing, and how serious the lung disease has become. Pulmonary function tests also can be used to assess how a patient is responding to different treatments.

One of the most common of the pulmonary function tests is spirometry (from the Greco-Latin term meaning "to measure breathing"). This test, which can be given in a hospital or doctor's office, measures how much and how fast the air is moving in and out of the lungs. Specific measurements taken during the test include the volume of air from start to finish, the fastest flow that is achieved, and the volume of air exhaled in the first second of the test.

A peak flow meter can determine how much a patient's airways have narrowed. A test of blood gases is a measurement of the concentration of oxygen and carbon dioxide in the blood, which shows how efficient the gas exchange is in the lungs.

Another lung function test reveals how efficient the lungs are in absorbing gas from the blood. This is measured by testing the volume of carbon monoxide a person breathes out after a known volume of the gas has been inhaled.

Precautions

Pulmonary function tests shouldn't be given to patients who have had a recent heart attack, or who have certain other types of heart disease. It is crucial that the patient cooperate with the health care team if accurate results are to be obtained.

Description

The patient places a clip over the nose and breathes through the mouth into a tube connected to a machine known as a spirometer. First the patient breathes in deeply, and then exhales as quickly and forcefully as possible into the tube. The exhale must last at least six seconds for the machine to work properly. Usually the patient repeats this test three times, and the best of the three results is considered to be the measure of the lung function. The results will help a doctor figure out which type of treatment to pursue.

Preparation

The patient should not eat a heavy meal before the test, nor smoke for four to six hours beforehand. The patient's doctor will issue specific instructions about whether or not to use specific medications, including bronchodilators or inhalers, before the test. Sometimes, medication may be administered as part of the test.

Risks

The risk is minimal for most people, although the test carries a slight risk of a collapsed lung in some patients with lung disease.

Normal results

Normal results are based on a person's age, height, and gender. Normal results are expressed as a percentage of the predicted lung capacity. The prediction takes into account the patient's age, height, and sex.

Abnormal results

Abnormal results mean that the person's lung capacity is less than 80% of the predicted value. Such findings usually mean that there is some degree of chest or lung disease.

Resources

BOOKS

Ruppel, Gregg L. Manual of Pulmonary Function Testing. St. Louis: Mosby, 1997.

KEY TERMS

Emphysema— A disease in which the small air sacs in the lungs become damaged, causing shortness of breath. In severe cases it can lead to respiratory or heart failure.