Clothing of the Byzantine Empire
Fashion, Costume, and Culture: Clothing, Headwear, Body Decorations, and Footwear through the Ages
|
2004
|
Copyright 2004 Gale, Cengage Learning. All rights reserved. (Hide copyright information)
Copyright
Clothing of the Byzantine Empire
The Byzantine costume tradition took its form from the Roman Empire (27 b.c.e.–476 c.e.) and its color and decorative tradition from the Orient and the Middle East. The Roman roots are easy to understand. After all, the Byzantine Empire began in the fourth century c.e. as the Eastern Roman Empire; its capital, Constantinople, was for a short time the capital of the entire Roman Empire. From the Romans the Byzantines inherited their basic clothing forms, the tunic and toga for men, and the stola, a type of long dress, for women, as well as their shoes and their hairstyles. These basic garments had become more ornate and luxurious late in the Roman Empire, yet it was not long after the fall of the Roman Empire in 476 c.e. that the Byzantines began to modify and extend the Roman costume tradition to become something uniquely their own.
Changing styles
By the end of the Roman Empire the toga, which had once been required wear for Romans, was worn only on ceremonial occasions. The Byzantines, who tended to prefer simple flowing clothes to the winding and draping of the toga, did away with the toga altogether. They chose as their most basic of garments the dalmatica, a long, flowing men's tunic, or shirt, with wide sleeves and hem, and the stola for women. Unlike the Romans, the Byzantines tended to be very modest about any display of flesh. Their garments were worn close about the neck, sleeves extended all the way to the wrist, and the hemline, or bottom edge, of their outer garments extended all the way to the ground. They layered their clothing, with men wearing a tunic and trousers under the dalmatica, and women wearing a long undergarment beneath their stola and an outer garment called a paludamentum, or long cloak.
One of the key features of the Byzantine Empire was its history of trade with the Middle East and the Orient. Traders brought exotic fabrics and patterns into the capital city of Constantinople from these regions, and rich Byzantines eagerly adopted the colors, patterns, and fabrics of the East into their costume tradition. Over time Byzantine clothing became ever richer in color and ornamentation, thanks largely to these influences. Deep reds, blues, greens, and yellows became common on the garments of wealthy people, but the richest color, purple, was reserved for royalty. When Byzantine emperors received foreign visitors, they costumed themselves in rich purple robes, glittering with gold embroidery and jewels sewn onto the fabric.
Among the more distinctive garments developed by the Byzantines were those worn by the clergy in the Christian church. Variations on normal Byzantine garments like the dalmatica, for example, took on specified roles in religious practice among the clergy. Garments originated by the Byzantines are still worn today by members of the Eastern Orthodox Church, and the influence of the Byzantines can be seen in the robes and headwear of leaders in the Roman Catholic Church, which split from the Eastern Orthodox Church in 1054.
Silk, the richest fabric
One fabric, silk, was especially beloved by the Byzantines. Silk first came to the West in about 139 b.c.e. via the long trade route that crossed the Middle East and reached China, and the supply was limited. In 552 c.e., however, two Persian monks, from what is modern-day Iran, smuggled silkworms out of China and began to produce silk within the Byzantine Empire. The Byzantines wove their silk into a strong fabric called samite, which sometimes had gold thread woven into the material. Silk was highly treasured by wealthy Byzantines to make a variety of garments as well as for embroidery.
Unlike in Rome, where strict sumptuary laws determined what people of different social classes could wear, the quality of Byzantine clothing was limited only by the ability of the wearer to pay for it. But this was a severe limit indeed, for only those at the very top of Byzantine society could afford the rich silks, jewels, and embroidery that distinguished Byzantine clothing. Most Byzantines likely wore much simpler versions of the common garments. However, as in many ancient cultures, little is known about what was worn by the poorer members of society because they were unable to afford the expensive things that would have survived many hundreds or thousands of years. The surviving remnants of Byzantine culture—tile mosaics, statues, and paintings—tend to depict the very wealthy or members of the church.
FOR MORE INFORMATION
Batterberry, Michael, and Ariane Batterberry. Fashion: The Mirror of History. New York: Greenwich House, 1977.
Cosgrave, Bronwyn. The Complete History of Costume and Fashion: From Ancient Egypt to the Present Day. New York: Checkmark Books, 2000.
Houston, Mary G. Ancient Greek, Roman, and Byzantine Costume and Decoration. New York: Barnes and Noble, 1947.
Yarwood, Doreen. The Encyclopedia of World Costume. New York: Charles Scribner's Sons, 1978.
Dalmatica
Paludamentum
Stola
Cite this article
Pick a style below, and copy the text for your bibliography.
"Clothing of the Byzantine Empire." Fashion, Costume, and Culture: Clothing, Headwear, Body Decorations, and Footwear through the Ages. The Gale Group, Inc. 2004. Encyclopedia.com. 9 Dec. 2009 <http://www.encyclopedia.com>.
"Clothing of the Byzantine Empire." Fashion, Costume, and Culture: Clothing, Headwear, Body Decorations, and Footwear through the Ages. The Gale Group, Inc. 2004. Encyclopedia.com. (December 9, 2009). http://www.encyclopedia.com/doc/1G2-3425500165.html
"Clothing of the Byzantine Empire." Fashion, Costume, and Culture: Clothing, Headwear, Body Decorations, and Footwear through the Ages. The Gale Group, Inc. 2004. Retrieved December 09, 2009 from Encyclopedia.com: http://www.encyclopedia.com/doc/1G2-3425500165.html
Learn more about citation styles
|
Carbide merger gets mixed reviews: ; Employees worried about company's future in valley
Newspaper article from: Charleston Daily Mail; 12/2/1999; ; 700+ words
; ...BUSINESS EDITOR Past and present Union Carbide workers voiced mixed feelings about the...Valley. Several said they are sad the Carbide name and blue hexagon logo will disappear. Union Carbide's shareholders voted overwhelmingly Wednesday...
|
|
LOCALLY PRODUCED CARBIDE RECEIVES PRESSURES FROM IMPORTED PRODUCTS
Magazine article from: Indonesian Commercial Newsletter; 2/28/1997; 700+ words
; The domestic demand for calcium carbide has continued to hike with the growth...especially the gas industry. However, local carbide, which is produced exclusively by PT...has been less competitive than imported carbide products. This is so because imported...
|
|
Calcium carbide output increases rapidly.(MARKET REPORT: Inorganics)(Statistical data)
Magazine article from: China Chemical Reporter; 10/6/2006; ; 700+ words
; ...first half of 2006 The output of calcium carbide in China was 8.9457 million tons in...to conduct rectification to the calcium carbide sector and the trend of redundant construction...of 2006, the oversupply in the calcium carbide market had no effective change. The price...
|
|
Carbides in High-Speed Steels Containing Silicon
Magazine article from: Metallurgical and Materials Transactions; 9/1/2004; ; 700+ words
; ...and amount of eutectic carbides in the high-speed...sub 2^C eutectic carbide almost disappears in...temperature of primary MC carbide in the high-speed...undissolved M^sub 6^C carbide very obviously. The...undissolved M^sub 6^C carbides. The amount of MC and...
|
|
Carbide vs. Diamond Tooling.(Point/Counterpoint)
Magazine article from: Wood Digest; 12/1/2007; 700+ words
; Carbide vs. Diamond Tooling Representatives from Royce//Ayr, Safranek Enterprises and Carbide Processors discuss the differences between...Provide a cost/benefit analysis on carbide vs. diamond tooling. Gene Veening, president...
|
|
Carbide cutting and grinding
Magazine article from: FDM; 5/1/2005; ; 700+ words
; Learn the basics of grinding carbide tooling to make it work for you. The hardest part of using carbide tooling may be getting started, especially...the whole process of cutting or grinding carbide. At first it may seem overwhelming, but...
|
|
Making carbide form tools with EDM. (electrical discharge machining)
Magazine article from: Modern Machine Shop; 1/1/1989; ; 700+ words
; Making Carbide Form Tools With EDM This progressive screw machine shop uses carbide for 90 percent of its form tools. Every tool is...house with wire EDM. There is little dispute that carbide tools cut faster and longer than high speed steel...
|
|
Carbide campers planning 25th reunion in July
Newspaper article from: Charleston Gazette; 6/27/2007; ; 700+ words
; ...were magical for the children of Union Carbide Corp. employees who attended camps in...by the company. During those years, "Carbide kids" amassed a lifetime of summer camp...letters, stories and songs. As former Carbide camper Scott Mease once wrote in a letter...
|
|
Carbide whiskers shrink to nanometer size. (researchers have developed silicon carbide filaments under 30 nanometers in diameter)(Brief Article)
Magazine article from: Science News; 7/8/1995; ; 700+ words
; ...The tiny fibers of silicon carbide used to strengthen airplane...Lieber found the niobium carbide nanorods to be superconducting and the iron carbide ones ferromagnetic. Hongjie...nanorods out of different carbides. "In principle, you can...
|
|
Carbide spurns GAF again
Newspaper article from: Chicago Sun-Times; 1/3/1986; 700+ words
; ...yesterday increased its takeover offer for Union Carbide Corp. again, but Union Carbide rejected the sweetened offer and unveiled new...last week. In rejecting the latest offer, Union Carbide said it would accept more than 50 percent of its...
|
|
Union Carbide Corporation
Book article from: International Directory of Company Histories
Union Carbide Corporation Union Carbide Corporation 400 West Sam Houston Parkway South Houston, Texas...Subsidiary of The Dow Chemical Company Incorporated: 1917 as Union Carbide & Carbon Corporation Employees: 3,800 Sales: $5.86...
|
|
The Carbide/Graphite Group, Inc.
Book article from: International Directory of Company Histories
The Carbide/Graphite Group, Inc. One Gateway Center...Basic Inorganic Chemical Manufacturing The Carbide/Graphite Group, Inc. produces massive...to form these electrodes; and calcium carbide and related products for use as fuel...
|
|
carbide
Book article from: The Columbia Encyclopedia, Sixth Edition
...acetylene and is an important source of the gas. Barium carbide reacts similarly. Aluminum carbide reacts with water to yield methane. Some carbides are unaffected by water, e.g., chromium carbide and silicon carbide . Silicon carbide, almost as...
|
|
silicon carbide
Book article from: The Columbia Encyclopedia, Sixth Edition
silicon carbide chemical compound, SiC, that forms extremely...for nuclear reactors. Very pure silicon carbide is white or colorless; crystals of it...high-temperature applications. Silicon carbide fibers, added as reinforcement to plastics...
|
|
calcium carbide
Book article from: World Encyclopedia
calcium carbide ( calcium acetylide ) Chemical (CaC 2 ) made commercially by heating coke and calcium oxide (CaO) in an electric furnace . It reacts with water to yield ethyne . Calcium carbide is also used to manufacture ethanoic acid and ethanal , as well as fertilizers.
|