Home > Categories > Science and Technology > Computers and Electrical Engineering > Computers and Computing > computer program

computer program

From: The Columbia Encyclopedia, Sixth Edition | Date: 2008

computer program a series of instructions that a computer can interpret and execute; programs are also called software to distinguish them from hardware, the physical equipment used in data processing . These programming instructions cause the computer to perform arithmetic and logical operations or comparisons (and then take some additional action based on the comparison) or to input or output data in a desired sequence. In conventional computing the operations are executed sequentially; in parallel processing the operations are allocated among multiple processors, which execute them concurrently and share the results. Programs are often written as a series of subroutines, which can be used in more than one program or at more than one point in the same program.

Systems programs are those that control the operation of the computer. Chief among these is the operating system—also called the control program, executive, or supervisor—which schedules the execution of other programs, allocates system resources, and controls input and output operations. Processing programs are those whose execution is controlled by the operating system. Language translators decode source programs, written in a programming language , and produce object programs, which are in machine language and can be understood by the computer. These include assemblers, which translate symbolic languages that have a one-to-one relationship with machine language; compilers, which translate an algorithmic- or procedural-language program into a machine-language program to be executed at a later time; and interpreters, which translate source-language statements into object-language statements for immediate execution. Other processing programs are service or utility programs, such as those that "dump" computer memory to external storage for safekeeping and those that enable the programmer to "trace" program execution, and application programs, which perform business and scientific functions, such as payroll processing, accounts payable and receivable posting, word processing, and simulation of environmental conditions.

Bibliography: See F. Maddix and G. Morgan, Systems Software: An Introduction to Language Processors and Operating Systems (1989).

Author not available, COMPUTER PROGRAM., The Columbia Encyclopedia, Sixth Edition 2008

The Columbia Encyclopedia, Sixth Edition. Copyright 2008 Columbia University Press

For permission to reuse this article, contact Copyright Clearance Center.

Related articles from HighBeam Research:

	Q1 2008 Computer Programs and Systems, Inc. Earnings Conference Call - Final Fair Disclosure Wire; 4/25/2008; 5631 words; ... thank you for standing buy and welcome to the Computer Programs and Systems first quarter earnings conference ... Douglas President and Chief Executive Officer at Computer Programs and Systems, Inc. Please go ahead, BOYD DOUGLAS, PRESIDENT AND CEO, COMPUTER PROGRAMS AND SYSTEMS, INC.: ...
	Toshiba Bolsters Recycling Program with Free Computer Take-Back Wireless News; 3/8/2007; 11 words; Copyright 2003 ProQuest Company All rights reserved. - Terms and Conditions
	TOP: Computers running the BootFinder program can display outstanding parking tickets and delinquent taxes...[Derived Headline; Caption text only] New Haven Register; 8/18/2007; Jack Golas; 2 words; Caption text only
	eBay Inc. and Intel Corp. launched a recycling program to safely dispose of computers and other electronics.(Industry notes)(Brief Article) Photo Marketing Newsline; 1/12/2005; 22 words; eBay Inc. and Intel Corp. launched a recycling program to safely dispose of computers and other electronics. Visit http://ebay.com/ rethink.
	Gaylord Hotels chose computer and telecom system manufacturer XTEND Communications Corp. for the "Consider It Done" guest service program.(Tech Bytes)(Brief Article) Lodging Hospitality; 3/1/2005; 30 words; Gaylord Hotels chose computer and telecom system manufacturer XTEND Communications Corp. for the Consider It Done guest service program at the Gaylord Opryland, Gaylord Palms and Gaylord Texan.
	Ansys of Canonsburg, Pa., a maker of computer-aided engineering software that develops mainly simulation programs. (Briefly Noted).(Brief Article) Mechanical Engineering-CIME; 7/1/2002; 38 words; Ansys of Canonsburg, Pa., a maker of computer-aided engineering software that develops mainly simulation programs, has partnered with Autodesk of San Rafael, Calif., a maker of CAD software. Ansys will provide simulation software for Autodesk.
	Department of Computer Science.(University of Saskatchewan's Software Engineering Honors Bachelor of Science program accredited)(Brief Article) SaskBusiness; 11/1/2001; 48 words; The Software Engineering Honors B.Sc program offered by the Department of Computer Science at the University of Saskatchewan has ... CSAC), making it the first software engineering program in Canada to be accredited by CSAC.
	COMPUTER PROGRAM EXPORTS VALUED Info-Prod Research (Middle East); 8/28/2002; Info-Prod Strategic Business Information; 43 words; According to Assafir newspaper (August 26, 2002), sources at the Lebanese information technology sector estimate the value of the Lebanese computer program exports at $50 million per annum. The same sources anticipate these computer program exports to rise by 50 percent in 2003.
	The Computer Hazardous-Waste Infrastructure Program (CHIP). (Business Briefs).(Brief Article) IIE Solutions; 9/1/2002; 49 words; ... to create a recycling program for the 41 million computers that are discarded every year. The Computer Hazardous-Waste Infrastructure Program (CHIP) Act would see ... administer grants to establish computer recycling programs throughout the United ...
	HK to help develop computer programs The Milwaukee Journal Sentinel; 12/7/2000; 45 words; HK to help develop computer programs Thursday, December 7, 2000 HK Systems Inc., New Berlin, has ... Rensselaer Polytechnic Institute in Troy, N.Y., to develop computer programs for use by companies considering the installation of materials ...
	System design: Mc4 Software, Leesburg, Va., offers Mc4, an AutoCAD[R]-compatible stand-alone system design program with four modules.(Focus on Software)(computer-aided design)(Brief article) ASHRAE Journal; 4/1/2007; 41 words; Mc4 Software, Leesburg, Va., offers Mc4, an AutoCAD[R]-compatible stand-alone system design program with four modules. The program automatically calculates the quantity of material inserted to aid in creating a materials inventory. www.info.hotims.com/12645-214
	Computer Resolutions Inc. (Credits, Clients and Awards).(certified as a system builder select program member)(Brief Article) Fairfield County Business Journal; 1/20/2003; 45 words; Computer Resolutions Inc. (CRI), Bridgeport, a supplier of computer hardware products and services, announced that NEC/Mitsubishi Electronics Display ... visual display solutions, has certified the company as a system builder select program member.
	COMPUTER PROGRAM PIRACY - OUTLOOK Info-Prod Research (Middle East); 6/4/2003; 50 words; ... Business Software Association (BSA) estimated the computer program piracy level in Kuwait at 73 percent in 2002 compared ... The same report estimated the losses resulting from computer program piracy practices in Kuwait at $5.7 million last year ...
	COMPUTER CLASS AVAILABLE AT BOYLE PROGRAM CENTER.(Local) The Post-Standard (Syracuse, NY); 1/1/2007; 39 words; A computer class will be offered from 9 to 10:30 a.m. Jan.9, 10, 16, 17, 23 and 24 at the Boyle Program Center, 149 Genesee St., Auburn. The cost is $70 for six sessions. Payment is due at the time of registration. For more information, call 253-6178.
	TRW's Avionics Engineering Center.(to manufacture and install Group II Mission Computer Replacement Program units)(Brief Article) Journal of Electronic Defense; 10/1/2001; 44 words; TRW's Avionics Engineering Center (San Diego, CA) was awarded a $17.8-million contract for the manufacture and installation of 43 Group II Mission Computer Replacement Program units into the E-2C Airborne Technical Data System (ATDS). Work is expected to be completed by March 2004.