Find more facts and information on our topic page about binary system

binary system

binary system numeration system based on powers of 2, in contrast to the familiar decimal system , which is based on powers of 10. In the binary system, only the digits 0 and 1 are used. Thus, the first ten numbers in binary notation, corresponding to the numbers 0, 1, 2, 3, 4, 5, 6, 7, 8, and 9 in decimal notation, are 0, 1, 10, 11, 100, 101, 110, 111, 1000, and 1001. Since each position indicates a specific power of 2, just as the number 342 means (3 × 10 ² ) + (4 × 10 ¹ ) + (2 × 10 ⁰ ), the decimal equivalent of a binary number can be calculated by adding together each digit multiplied by its power of 2; for example, the binary number 1011010 corresponds to (1 × 2 ⁶ ) + (0 × 2 ⁵ ) + (1 × 2 ⁴ ) + (1 × 2 ³ ) + (0 × 2 ² ) + (1 × 2 ¹ ) + (0 × 2 ⁰ ) = 64 + 0 + 16 + 8 + 0 + 2 + 0 = 90 in the decimal system. Binary numbers are sometimes written with a subscript "b" to distinguish them from decimal numbers having the same digits. As with the decimal system, fractions can be represented by digits to the right of the binary point (analogous to the decimal point). A binary number is generally much longer than the decimal equivalent; e.g., the number above, 1011010 _b , contains seven digits while its decimal counterpart, 90, contains only two. This is a disadvantage for most ordinary applications but is offset by the greater simplicity of the binary system in computer applications. Since only two digits are used, any binary digit, or bit, can be transmitted and recorded electronically simply by the presence or absence of an electrical pulse or current. The great speed of such devices more than compensates for the fact that a given number may contain a large number of digits.