voltage divider
voltage divider see potentiometer .
Cite this article
Pick a style below, and copy the text for your bibliography.
|
Photomultiplier. (Medical Products).
Magazine article from: Designfax; 7/1/2003; 72 words
; The 2-in. square head-on 85011 Planacon MCP-PMT low-profile photomultiplier has an integrated voltage divider network and is less than 1-in. thick. Its 64 anodes provide 6 mm position resolution when used as a discrete pixel device, while...
Read more
|
|
|
Photosensor modules.(Product News)
Magazine article from: Designfax; 6/1/2004; 78 words
; ...jobs. It consists of 1 1/28-in. dia. end window-type modules. Each integrated module contains a high-voltage power supply, voltage divider and signal amplifier. It offers a low power consumption of 10 mA at 12V. Burle Industries Inc, Lancaster, PA Circle 282...
Read more
|
|
Power in the field and on the shop floor.(New Products)
Magazine article from: Modern Applications News; 10/1/2008; 140 words
; ...low-line conditions or when connected to a motor generator. The system is designed with a built-in CNC interface and 50:1 voltage divider. Its drag cutting technology and controls provide for operator use. It includes a quick disconnect torch for transitions...
Read more
|
|
Controlling the alternator. (Shop talk).
Magazine article from: Outdoor Power Equipment; 12/1/2001; ; 700+ words
; ...frequencies and lower operating temperatures because no filament is needed to heat the emitter. Figure 5 shows a common voltage divider. When there are two identical resistors attached in series to a voltage source, the voltage between the resistors is half...
Read more
|
|
|
Clear-cut leader: key factors to consider when choosing the right plasma cutting system.(SPOTLIGHT: PLASMA CUTTING)
Magazine article from: Modern Applications News; 3/1/2009; 700+ words
; ...for use on X-Y tables, track burners, pipe bevellers, and robotic arms. A few systems include a CNC interface and internal voltage divider, providing options for mechanized applications. In addition to cutting, many plasma models may also be used for gouging...
Read more
|
|
Eliminating the reel motor position sensor in a tape drive.(Tape/Disk/Optical Storage)
Newspaper article from: Computer Technology Review; 1/1/2002; ; 700+ words
; ...network to simulate the voltage across an ideal winding with no impedance variation. The two driven motor windings form a voltage divider. Knowing that the impedance variations will cause the center node to vary, our technique compares this center node to the...
Read more
|
|
potentiometer
Book article from: The Columbia Encyclopedia, Sixth Edition
...of the resistance element are attached to two input voltage conductors of the circuit, and the third contact, attached...movable terminal determines what percentage of the input voltage will actually be applied to the circuit, the potentiometer can be used to vary the magnitude of the voltage; for this ...
Read more
|
