Geologic Map

views updated May 23 2018

Geologic map

Geologic maps display the arrangement of geologic features of a particular area. These features can include such things as types of rocks, faults, minerals, and groundwater. From studying a geologic map the user can better understand possible dangers like the potential for floods or earthquakes, and help locate important deposits of energy resources, such as water, oil, natural gas, and minerals. Through the use of letters, colors, lines, and symbols, geologic maps help the user gain a better understanding of Earth's makeup.

Elements of geologic maps

Geologic maps use color to represent various types of geologic features or units (a particular type of rock with a known age range). Geologic units are indicated by colors that can range from yellows and reds to purples and browns. Not only are geologic units assigned a color but also a set of letters. The set is usually composed of an initial capital letter followed by one or two lowercased letters. The capital letter represents the age of the geologic unit. The lower-cased letters indicate the geologic unit's name or the type of rock of which it is comprised.

Contact and fault lines. When two geologic units are located next to each other, the place where they meet is called a contact. The two main types of contacts are depositional contacts and faults. Depositional contacts are created when geologic units are composed under, over, or next to each other. The place where they meet is called a depositional contact and is indicated by a thin line. Geologic units can be moved over time by faults. Faults are cracks or fractures in Earth's crust (outer portion of Earth's surface) caused by the movement of land masses, called plates, on either side of the fault line. When plates move suddenly, the result is an earthquake. A fault line (a thick line with the same geologic unit on both sides of the line) indicates geologic units that have been moved by faults after they have been formed. Fault lines are especially important for geologic maps of a state such as California, where faults are known to be active.

Words to Know

Bed: Mass of rock that extends under a large area and is bounded by different material.

Fault: A crack running through rock that is the result of tectonic forces.

Fold: A bend in a layer of rock.

Plates: Large regions of Earth's surface, composed of the crust and uppermost mantle, which move about, forming many of Earth's major geologic surface features.

Fold lines. Over time, geologic units can be reshaped by Earth's movements into wavelike shapes called folds. (A fold is a bend in a geologic unit that forms due to a change in pressure). Wavelike folds are composed of layers of Earth's crust that bend and buckle under enormous pressure as the crust hardens, compresses, and shortens. Folds may be softly rolling or severe and steep, depending on the amount of pressure and density of the crust. Folding may be massive, creating mile upon mile of mountains like the Appalachian chain, which traverses the eastern United States from New York to Georgia. A fold axis (a line that follows through the crest, or peak, of a fold) is represented on a geologic map by a line thicker than a depositional contact line.

Lines on a geologic map can be adjusted according to known or unknown locations. When a contact line is indicated but the location is not quite certain, the line will appear as dashed. As the dashes that make up a line become shorter, the more uncertain the location is to establish. This could be due to man-made construction or natural growth of vegetation. If the line appears dotted, the location is very uncertain. Other, more specialized symbols are often used as well on geologic maps to help the user understand the makeup of Earth below.

Strike and dip lines. Over millions and millions of years, rocks form into layers that are called beds. These beds can reach significant heights, such as the walls of the Grand Canyon in Arizona. Sometimes these beds do not stand straight up due to the shifting of Earth's plates (large sections of the Earth's crust and upper mantle, the portion just below the

crust). The result is that the bed is tilted. To identify such a bed on a geologic map, a strike and dip symbol is used. The strike and dip symbol is composed of three elements: a long line, a short line, and a number. The strike line is represented by the long line and indicates what part of the bed is still horizontal. The next line, the short line, is called the dip line and indicates which way the bed is tilted. The number, called the dip, follows next and indicates in degrees how much the bed is tilted. The higher the number, the more sharply the bed is tilted.

Map key. To help the user understand a geologic map, a map key is always provided. A map key is a table that displays all the colors and symbols used on a map. Starting with the most recently composed geologic unit and preceding to the oldest, a description of the type of rocks and their age are listed next to the color that represents them on the map. Following the list of geologic units comes another list of symbols, such as different types of lines, and then the strike and dip marks. If necessary, a map key also contains other important information, such as the locations of fossils, deposits of precious metals (such as gold, silver, and platinum, which have historically been valued for their beauty and rarity), and faults.

The future of geologic information

In 1992, the U.S. Congress passed the National Geologic Mapping Act (Public Law 102-285). Part of the act states: "Federal agencies, state and local governments, private industry, and the general public depend on the information provided by geologic maps to determine the extent of potential environmental damage before embarking on projects that could lead to preventable, costly environmental problems or litigation." The act also directs that the U.S. Geological Survey establish a geologic database that involves public and private institutions to help promote a better understanding of Earth and how to protect it.

Two years later, U.S. President Bill Clinton (1946 ) signed an executive order for the National Spatial Data Infrastructure (NSDI). This order is particularly important because it specifically provides for the establishment of the National Geospatial Data Clearinghouse. This clearinghouse will allow users to search for geologic information.

The sharing of geologic information is key to achieving a better understanding of Earth. By studying geologic maps, users can identify such potential natural hazard areas for floods, earthquakes, volcanoes, and landslides. These maps can also provide data on important deposits of energy resources such as oil, natural gas, and coal.

[See also Cartography; Fault; Geology; Plate tectonics ]

Geologic Map

views updated Jun 27 2018

Geologic Map

Geologic maps are graphical representations of rocks, sediments, and other geologic features observed or inferred to exist at or beneath Earths surface. They

can be based on observations of outcrops in the field, interpretation of aerial photographs or satellite images, or information obtained during the drilling of exploratory boreholes. Outcrops can be obscured, particularly in areas covered by dense vegetation or thick soil, and borehole information is often limited. Therefore, geologic maps are in most cases interpretive rather than purely descriptive scientific documents. Geologic maps are used for a variety of purposes, including petroleum, mineral, and ground-water exploration; land use planning; and natural hazard studies.

The first modern geologic map was drawn by William Smith (1769-1839), a British canal builder. He recognized that sedimentary rocks occurred in a consistent sequence throughout the countryside. Knowing the position of a coal bed within the sedimentary rock sequence in one location allowed Smith to predict its occurrence and depth beneath the surface in other locations. Likewise, knowledge of rock sequences allowed Smith to predict the kinds of rocks that would be encountered during canal construction.

A general geologic map classifies rocks primarily according to their ages and secondarily according to their formation names. Formations are rock units that have a distinctive appearance or physical properties that can be identified in the field, and must also be laterally extensive and thick enough to depict on maps of a specified scale. In the United States, the scale at which formations must be mappable is 1:24,000, which corresponds to the scale of U.S. Geological Survey topographic maps covering 7.5 minutes of latitude and longitude.

Formations are named according to a protocol that requires a published description of each proposed formation in a scientific journal. If a formation consists of only one rock type, that rock type is included in the formation name (Berea Sandstone). If a formation consists of different rock types, then the word Formation is appended (Morrison Formation). Formations are named after nearby landmarks and, unlike fossils, never named directly after people. They can be, however, named after places that are named after people. The Gene Autry Shale, for example, is named after the town of Gene Autry, Oklahoma. The town, in turn, was named after the famous American singing cowboy Gene Autry (1907-1998).

Geologic maps also contain symbols representing geometric elements that are collectively known as geologic structures. These include faults, joints (fractures across which very little movement has occurred), aligned prismatic or platy mineral crystals known as lineations or foliations, and strata that have been tilted or folded in response to stresses within Earths crust.

Specialized geologic maps can also be prepared. Engineering geologists conducting investigations for construction projects, for example, may be more concerned with rock types than ages. They may therefore depict rocks using a system that emphasizes rock type and origin over age. Petroleum geologists and hydro-geologists often prepare maps based solely on information obtained during the drilling of oil, gas, and water wells. Those that depict changes in the thickness of a particular formation are known as isopach maps. Structure maps show the elevation or depth of a formation that may be an important petroleum reservoir or aquifer.

Geologic Map

views updated May 14 2018

Geologic map

Geologic maps are graphical representations of rocks , sediments, and other geologic features observed or inferred to exist at or beneath Earth's surface. They can be based on observations of outcrops in the field, interpretation of aerial photographs or satellite images, and information obtained during the drilling of exploratory boreholes. Outcrops can be obscured, particularly in areas covered by dense vegetation or thick soil , and borehole information is often limited. Therefore, geologic maps are in most cases interpretive rather than purely descriptive scientific documents. Geologic maps are used for a variety of purposes, including petroleum , mineral, and groundwater exploration; land use planning; and natural hazard studies.

The first modern geologic maps were drawn by William Smith (1769-1839), a British canal builder. He recognized that sedimentary rocks occurred in a consistent sequence throughout the countryside. Knowing the position of a coal bed within the sedimentary rock sequence in one location allowed Smith to predict its occurrence and depth beneath the surface in other locations. Likewise, knowledge of rock sequences allowed Smith to predict the kinds of rocks that would be encountered during canal construction.

A general geologic map classifies rocks primarily according to their ages and secondarily according to their formation names. Formations are rock units that have a distinctive appearance or physical properties that can be identified in the field, and must also be laterally extensive and thick enough to depict on maps of a specified scale. In the United States, the scale at which formations must be mappable is 1:24,000, which corresponds to the scale of U.S. Geological Survey topographic maps covering 7.5 minutes of latitude and longitude .

Formations are named according to a protocol that requires a published description of each proposed formation in a scientific journal. If a formation consists of only one rock type, that rock type is included in the formation name (Berea Sandstone). If a formation consists of different rock types, then the word Formation is appended (Morrison Formation). Formations are named after nearby landmarks and, unlike fossils, never named directly after people. They can be, however, named after places that are named after people. The Gene Autry Shale, for example, is named after the town of Gene Autry, Oklahoma. The town, in turn, was named after the famous American singing cowboy Gene Autry (1907-1998).

Geologic maps also contain symbols representing geometric elements that are collectively known as geologic structures. These include faults, joints (fractures across which very little movement has occurred), aligned prismatic or platy mineral crystals known as lineations or foliations, and strata that have been tilted or folded in response to stresses within Earth's crust.


Specialized geologic maps can also be drawn. Engineering geologists conducting investigations for construction projects, for example, may be more concerned with rock types than ages. They may therefore depict rocks using a system that emphasizes rock type and origin over age. Petroleum geologists and hydrogeologists often prepare maps based solely on information obtained during the drilling of oil, gas, and water wells. Those that depict changes in the thickness of a particular formation are known as isopach maps. Structure maps show the elevation or depth of a formation that may be an important petroleum reservoir or aquifer .

Geologic Map

views updated Jun 08 2018

Geologic map

A geologic map shows the types of rocks or loose sediments at or below Earth's surface, along with their distribution. Geologic maps also illustrate the relative ages of, and physical relationships between, Earth's materials. Geologic maps are used for a variety of purposes, including natural resource development, land use planning, and natural hazard studies.

There are three steps to constructing a geologic map. First, the geologist locates natural or man-made exposures of rock called outcrops. Second, the geologist records outcrop locations and characteristics on a simple base map. Finally, the geologist prepares a geologic map by interpreting the distribution of and relationships between rock units.

Outcrops provide several kinds of data that are critical to map construction. The geologist records the rock type, for example, sandstone or granite , and a detailed description of its specific physical characteristics. Fossils , if present, may allow the rock to be dated fairly accurately. If more than one rock type is present, the nature of the contact between them is important. In addition, the geologist records the shape and spatial orientation of each rock unit.

The accuracy of a geologic map is primarily dependent upon the spacing of outcrops. If outcrops are widely spaced, the geologist must use his or her knowledge of local and regional geology to fill in, or interpolate, between the outcrops. In most cases, the best interpretation will be the simplest one that fits all the known data.

The spacing of outcrops is dependent upon several factors. If the terrain is steep or vegetation is sparse, outcrops are better exposed. Rock units that are resistant to erosion also form good outcrops. Finally, in flat terrain, resistant beds are better exposed if they are steeply inclined (due to deformation).

The fundamental rock unit for mapping is the formation. A formation is a body of rock consisting of one or more rock types, usually at least 10 ft (3 m) in thickness, that is present over a large geographic area . These characteristics allow it to be the basis for geologic mapping. Formations are named for a geographic location, such as a town, near where

they were first described. For example, the Miami Limestone was named for Miami, Florida.

The distribution of each formation is shown on the map using a separate color, a letter code, or both. A line indicates where the contact is located between adjacent formations. If the contact is exposed at the surface, a solid line is used; if covered, a dashed line is used. Heavier lines indicate the location of faults. With training, one can learn to determine the geologic history of an area from looking at a geologic map.

See also Bathymetric mapping; Cartography

geologic map

views updated May 08 2018

geologic map A map which shows the surface distribution of rock types, including their ages and relationships, and also structural features.

About this article

Geologic Map

All Sources -
Updated Aug 13 2018 About encyclopedia.com content Print Topic