Standard Deviation

views updated May 17 2018

Standard Deviation

BIBLIOGRAPHY

The standard deviation is found throughout the behavioral and social science literature. It is the average spread among a set of scores around their mean, and it is the most frequently used measure of variability in parametric datasets. Researchers analyze their data by looking at the variability and breaking that variability down into its component parts.

When we describe any set of data we use three characteristics: (1) the form of the distribution, (2) the mean or central tendency, and (3) the variability. All three are required, since they are generally independent of each other. In other words, knowing the mean tells us nothing of the variability.

Variability is a characteristic of all measures. In the social sciences, the people or groups that researchers study may be exposed to the same treatment or conditions, yet they show different responses to that treatment or condition. In other words, all the scores of the people or groups would be different. The goal of the scientist is to explain why the scores are different. If everyone were exactly the same, the standard deviation would be zero.

In addition to describing their data, researchers use the standard deviation in inferential statistics. When they manipulate conditions or treatments, researchers attempt to explain different scores between groups by looking at the variability between the groups. If the groups are different enough, then they are said to be statistically significantly different. This conclusion may be drawn based on the probability (odds) that the difference could have occurred by chance. Researchers use these samples as estimates of the true parameters in the population of interest, and the standard deviation is used (along with the sample size) to establish the precision of the estimates (Winer 1971). The smaller the standard deviation, the smaller the error (or the greater the precision of the estimate).

We also find variability that cannot be explained by the treatments or conditions applied to the people or groups. This variability must also be a part of all the explanations. This part of the variability is often called error, since experiments or studies do not indicate why it occurs.

The English mathematician and statistician Karl Pearson (18571936) introduced the procedure and the term standard deviation to statistics in 1892 (Magnello 2005). The standard deviation calculation is very straightforward. The standard deviation is defined as the square root of sum of the squared deviations from the mean, divided by the number of squared deviations. The equation for the standard deviation is where stdev is the standard deviation, X is a raw score, M is the mean of the scores, XM represents the deviation of a score from the mean, and N is the number of scores. Many different symbols have been used to represent the elements of the equation, but in all cases the standard deviation is the square root of the average of the squared deviations from the mean.

At this point, new students of statistics often ask why researchers do not use the deviations from the mean directly. The deviations from the mean cannot be averaged since the sum of the deviations from the mean is always zero. It is possible to use the mean deviation score, which avoids the zero sum by employing absolute values, but this tends to be mathematically cumbersome (Weisstein 2003).

An example will illustrate the calculation of the standard deviation. Let us assume we have five scores for five individuals. The N is equal to 5. The scores are 10, 8, 6, 4, and 2. We must first calculate the mean, so we add all the scores and then divide by N. The sum of the scores (10 + 8 + 6 + 4 + 2) is 30, and the mean is 30 divided by 5, or 6. Next we must subtract the mean from each score to get the deviation score (10 - 6 = 4, 8 - 6 = 2, 6 - 6 = 0, 4 - 6 = -2, and 2 - 6 = -4). Note we cannot get the mean deviation score because the sum of the deviations is zero. This is always true. We solve this problem by squaring each deviation score (which eliminates the negative signs), then summing and dividing by N (42 = 16, 22 = 4, 02 = 0, -22 = 4, and -42 = 16; the sum of these deviation scores squared is 40; dividing 40 by 5 gives us 8). Since this result is the average of the squared deviations (also known as the variance ), we must get back to the original score units by taking the square root of 8. The final result is a standard deviation of 2.8284 (rounded to four decimal places). We can say the average spread in the set of scores is about 2.8 (or as precise as we need to be).

A common way to help students and others visualize the standard deviation is to show a graph of a normal distribution, with the standard deviations as lines above and below the mean. We do this because many variables of interest to science are distributed normally (or approximately so) in the population of interest. In a large distribution (and a population), there are about three standard deviations above the mean, and three below the mean. Given these assumptions, we can say that approximately 68 percent of a population falls between -1 and +1 standard deviation of the normal curve; approximately 95 percent falls between -2 and +2 standard deviations; and better than 99 percent of the population falls between -3 and +3 standard deviations.

When the distribution of scores is not approximately normal, the use of the standard deviation, and the mean itself, may not be the preferred approach for describing the data. The reason for this is that extreme scores will have a large impact on the squared deviations from the mean, making the spread among scores appear quite large.

Skewed population data, such as income, may best be described using the median for central tendency and the mean absolute deviations from the median as the measure of spread. Another approach is to use the semi-interquartile range (also called the interquartile range) to describe the spread in skewed distributions. Extreme scores do not particularly affect this index, but it is more susceptible to sampling fluctuation and should not be used if the distribution is approximately normal. Box plots are often used to show both central tendency and dispersion using the semi-interquartile range. Unfortunately quartiles and box plots do not have the mathematical properties of the standard deviation and limit further analyses.

The standard deviation is used widely throughout the social sciences. In economics, the description of variations in stock prices employs the standard deviation. In political science, the assessment of voter preference is described as a percentage plus or minus, where the plus or minus amount is derived from the standard deviation. In psychology and sociology, variability among individuals and groups is routinely expressed in standard deviation units. In these days of powerful computer-based statistical tools that are available for laptop computers (arguably the two most widely used are SAS and SPSS), obtaining standard deviations (and most other statistical results) is quick and precise. Other programs, designed more for business use, also provide built-in formulas for calculating the standard deviation (often these are not considered accurate for scientific reporting).

SEE ALSO Frequency Distributions; Measurement; Pearson, Karl; Social Science; Statistics; Test Statistics; Variance; Variation

BIBLIOGRAPHY

Barlow, Kathleen. 19942007. Standard Deviation. In The Encyclopedia of Educational Technology, ed. Bob Hoffman. http://coe.sdsu.edu/eet/Articles/standarddev/start.htm.

Games, Paul, and George Klare. 1967. Elementary Statistics: Data Analysis for the Behavioral Sciences. New York: McGraw-Hill.

Magnello, M. Eileen. 2005. Karl Pearson and the Origins of Modern Statistics: An Elastician Becomes a Statistician. The Rutherford Journal 1 (December). http://rutherfordjournal.org/article010107.html.

Weisstein, Eric W. 2003. Mean Deviation. MathWorldA Wolfram Web Resource. http://mathworld.wolfram.com/MeanDeviation.html.

Winer, B. J. 1971. Statistical Principles in Experimental Design. 2nd ed. New York: McGraw-Hill.

Samuel K. Rock Jr.

standard deviation

views updated Jun 27 2018

standard deviation A measure of the dispersion of data in statistics. For a set of values a1, a2, a3, … an, the mean m is given by (a1 + a2 + … + an)/n. The deviation of each value is the absolute value of the difference from the mean #|ma1#|, etc. The standard deviation is the square root of the mean of the squares of these values, i.e. √[(#|ma1#|2 + … |man|2)/n]

standard deviation

views updated Jun 08 2018

standard deviation (stand-erd) n. (in statistics) a measure of the scatter of observations about their arithmetic mean (see frequency distribution), which is calculated from the square root of the variance of the readings in the series. The arithmetic sum of the amounts by which each observation varies from the mean must be zero, but if these variations are squared before being summated, a positive value is obtained: the mean of this value is the variance. In practice a more reliable estimate of variance is obtained by dividing the sum of the squared deviations by one less than the total number of observations.

standard deviation

views updated Jun 08 2018

standard deviation (symbol σ or s) In statistics, a measure of deviation of observed data or scores from the mean. A small standard deviation indicates that observations cluster around the mean, while a large one indicates that the data are spread far from the mean. The standard deviation is equal to the square root of the variance (the mean of the sum of the squared differences of the data points from the mean).

standard deviation

views updated May 21 2018

standard deviation In statistics, the extent to which data depart from the mean, given by: σ = √(Σ(x)2/N), where σ is the standard deviation, Σ(x) the sum of the deviations of each datum (x) from the mean (), and N is the number of samples.

standard deviation

views updated May 08 2018

standard deviation A measure of the normal variation within a set of data. In any given measurement, two-thirds of the samples fall within one standard deviation on either side of the mean, 95% between two standard deviations, and so on; the proportion falls off sharply because of the bellcurve effect. The standard deviation is calculated as the root-mean-square deviation.

standard deviation

views updated May 21 2018

standard deviation A measure of the normal variation of a population. In any given measurement, two-thirds of the population fall within one standard deviation on either side of the mean, 95% between two standard deviations, and so on; the proportion falls off sharply because of the bell-curve effect. The standard deviation is calculated as the root-mean-square deviation.

standard deviation

views updated May 18 2018

standard deviation See measures of variation.

standard deviation

views updated May 23 2018

standard deviation See VARIATION.

About this article

Standard deviation

All Sources -
Updated Aug 08 2016 About encyclopedia.com content Print Topic