|
Near-Dry Machining Cuts the Heat
|
Systems for supplying minimum quantities of cutting fluid are slipping into shops that use traditional flood-cooling-though slowly
"Metal working fluids are not costly in themselves, but they can run up the costs of production if poorly chosen or improperly handled and controlled." This is a reasonable observation for today, even though this statement appeared nearly 60 years ago in a booklet on cutting fluids from Standard oil. The emphasis on fluid handling and control shows how cons...
Related newspaper, magazine, and journal articles from HighBeam Research
|
|
Machining Springs, Wire Forms Near-Dry
Manufacturing Engineering
; Near-dry machining on a CNC wire-forming operation has produced ... such as plate, passivation, stress relieve, heat treat, shot peen, and tumble. To improve productivity ... and in particular at the Accu-Lube system of near-dry machining from ITW ROCOL North America (Glenview, ...
|
