MDM Observatory
MDM Observatory An observatory on Kitt Peak, Arizona, jointly owned by the University of Michigan, Dartmouth College, the Ohio State University, Columbia University, and Ohio University; the initials MDM arise from the names of the three initial owners, Michigan, Dartmouth, and MIT. The MDM Observatory operates two telescopes: the 2.4-m Hiltner Telescope, altitude 1938 m, opened in 1986, and the 1.3-m McGraw–Hill Telescope, altitude 1925 m, opened at Dexter, Michigan, in 1969 and moved to Kitt Peak in 1975. http://www.astro.lsa.umich.edu/obs/mdm/
Cite this article
Pick a style below, and copy the text for your bibliography.
|
Moldings bring out the best in a room, in a house and in you
Newspaper article from: The Boston Globe; 3/21/1993; ; 700+ words
; ...have invaded the molding industry with a...advantage to plastic moldings is their light...place to start with moldings is the molding shed of a local...interesting, use molding. You can get straight...reverse curved moldings to make any design...
|
|
|
Molding can fancy up the house, in and out
Newspaper article from: The Boston Globe; 5/11/1997; ; 700+ words
; ...are another use for moldings. Manufacturers are...different kinds of molding, always with an indented...there are many uses for moldings, be careful in choosing certain moldings for your house. A deep crown molding will not go well in...
|
 "Professional Builder (1993)")
|
Moldings & trim: add value to your new homes by incorporating these decorative details indoors and out.(Product Report)
Magazine article from: Professional Builder (1993); 3/1/2004; ; 700+ words
; ...grew up in an age when moldings only did things like...West Coast sales for molding and millwork manufacturer...the possibilities of moldings and trim not only can...home buyers expect base molding," Roth says, "but...a builder adds crown moldings, moldings around doors...
|
 "Post-Tribune (IN)")
|
Molding and trim--The crowning glory of any room
Newspaper article from: Post-Tribune (IN); 10/14/2007; ; 700+ words
; ...install trim, even crown molding." Here are facts you...include baseboards, molding around doors and windows...ceiling trims and crown moldings. They can all be as...company pre-cuts the moldings for the proper fit. Precut corners and the molding's light weight means...
|
|
Moldings add elegance
Newspaper article from: Chicago Sun-Times; 8/11/1991; 570 words
; ...afford. The once ornate moldings became both smaller and...the largest, most ornate moldings once again are affordable. Reproductions of classic molding styles are offered in plaster...Likewise, machine-cut wood moldings have replaced more expensive...
|
|
|
Molding a look that lasts
Newspaper article from: The Boston Globe; 4/8/1999; ; 700+ words
; ...The Boston market for moldings has exploded," says Richard...back the original ornate moldings." Kessel says he has in stock curved ceiling molding, window casings, and baseboards. These flexible moldings, made of polyurethane...
|
|
Reportlinker Adds Molding And Trim - A North American Market Perspective.
PR Newswire; 12/2/2009; 700+ words
; ...reportlinker.com/p0164512/Molding-And-Trim---A...affluent, decorative moldings and trims that can make...commoners. A simple molding design can work wonders...of Custom Decorative Moldings Polyurethane Division...Interest in the Southwest Molding Co 13 AZEK Acquires...
|
|
Core Molding Technologies Announces New Labor Contract
Newspaper article from: U.S. Newswire; 6/7/2007; 700+ words
; ...Contact: Herman F. Dick, Jr. of Core Molding Technologies, Inc., +1-614-870...7 /PRNewswire-FirstCall/ -- Core Molding Technologies, Inc. (AMEX: CMT) today...relations with our employees." Core Molding Technologies, Inc. is a compounder of...
|
|
|
Core Molding Technologies Reports First Quarter 2008 Results.
PR Newswire; 5/8/2008; 700+ words
; ...May 8 /PRNewswire-FirstCall/ -- Core Molding Technologies, Inc. today announced results...recovery in the truck market in 2008." Core Molding Technologies, Inc. is a compounder of sheet molding composites (SMC) and molder of fiberglass...
|
|
|
Core Molding Technologies Announces Letter of Intent to Acquire Assets of Cincinnati Fiberglass.
PR Newswire; 7/5/2005; 700+ words
; ...5 /PRNewswire-FirstCall/ -- Core Molding Technologies, Inc. today announced...greater geographical reach, additional molding capacity and expanded process diversification with their open molding and multiple insert tooling (MIT) resin...
|
|
molding
Book article from: The Columbia Encyclopedia, Sixth Edition
...The shape of a molding is termed its profile or section. Moldings formed an important...temple or pylon. Moldings were an essential...profiles form the basic molding vocabulary for classic...heavier, projecting moldings, which cast dramatic...cent., decorative molding has been ...
|
|
SIC 3442 Metal Doors, Sash, Frames, Molding, and Trim
Encyclopedia entry from: Encyclopedia of American Industries
SIC 3442METAL DOORS, SASH, FRAMES, MOLDING, AND TRIM Companies in this industry...window and door frames and screens, molding, and trim. Establishments primarily...doors, windows, sash, door frames, molding, and trim are classified in SIC 2431...
|
|
Dickten Masch Plastics LLC
Book article from: International Directory of Company Histories
...when a customer again requires parts. Dickten Masch employs both thermoplastic molding and thermoset molding technologies. Capabilities include multi-shot molding, combining parts into a single molding process to eliminate further assembly...
|
|
|
Ampacet Corporation
Book article from: International Directory of Company Histories
...Private Company Founded: 1937 as American Molding Powder & Chemical Corp. Sales...and cast films, blownware, injection molding, wire and cable, pipe and conduit...Brooklyn, New York, in 1937 as American Molding Powder & Chemical Corp. It was...
|
|
|
SIC 3061 Molded, Extruded, and Lathe-Cut Mechanical Rubber Goods
Encyclopedia entry from: Encyclopedia of American Industries
...is the most important component in the molding process, giving the part its shape and...look, and functions. The choice of molding process—compression, transfer...processes, combining two of the three molding techniques, have become popular in some...
|
