Global trends in the radiation curing market. (Special Report).(Illustration)

From: China Chemical Reporter | Date: February 6, 2003| Author: | Copyright information

Japan holds half of the radiation curing market in Asia, with China holding 12.4%. The output of radiation curing products in China was close to 40 000 tons in 2001 and is set to maintain an average annual rate of 25%.

Radiation curing has the feature of rapid curing at normal temperatures. It not only increases the product yield by a considerable margin, but also improves the product quality and produces no environmental pollution. The annual growth of radiation curing is two times higher than the conventional coating sector. In spite of this, the international ...

Read all of this article with a FREE trial to HighBeam Research

Related newspaper, magazine, and trade journal articles from HighBeam Research

(Including press releases, facts, information, and biographies)

Radiation curing: growing bigger and better: environment, new products drive market. (Special Report)
; ...Belleville, NJ), a compounder of radiation-curing chemicals. And we hope it stays that...every reason to believe that growth in radiation curing--or ultraviolet (UV)/electron beam...guidelines will specifically mention radiation curing, but it is virtually certain they...
Special acrylic esters have broad prospect.
; ...long years in the past the radiation curing market in the world was mainly...a drastic growth of the radiation curing market in Asia in recent years...development stage in China. The radiation curing market in China is therefore still...
Radiation curing made easier: new software can help formulators, manufacturers and finishing engineers in the radiation curing industry improve productivity and shorten the delivery of new products to market.(TECHNOLOGY: RADIATION CURING)
; Radiation curing is a small but...rates, while the radiation curing segment, representing...1) However, radiation curing is much more...addressable radiation curing market is nearly $3...that radiation curing technology is...to enter, as ...
A review of radiation curing: new surface control additives.
; Radiation curing is a process whereby reactive liquids...coatings industry nearly 30 years ago, radiation curing technology has benefited from an...growth rate. During the 1980s the radiation curing coatings market grew at an annual...
Radiation curing of coatings.
; Radiation curing technology is emerging as an ecologically...terminology used in the ultraviolet radiation curing industry. The book contains over...took place in the early days of radiation curing. Specific end uses for radiation-cur...
Radiation curing: small coating segment thrives on innovation. (includes related article on niche marketing by radiation curing companies) (Cover Story)
; Radiation curing of specialty coatings, inks, and...Thousands of companies are involved in radiation curing. The technology has been growing...supplying monomers and oligomers for radiation curing. Raw materials producers traditionally...
ASTM Manual on Radiation Curing of Coatings now available. (Reference Watch).
; ASTM Manual 45, Radiation Curing of Coatings focuses on radiation curing of coatings, adhesives, inks, and sealants...marketers, and managers who are engaged in the radiation curing of coatings, adhesives, inks, and sealants...
Radiation curing develops rapidly.(Fine Chemicals)
; Radiation curing including ultraviolet (UV) curing and electric...years since Bayer of Germany first developed radiation curing wood product coatings and commercialized radiation curing technology, but a robust development has been...
ASTM International. (In Brief).(releases Manual 45, Radiation Curing of Coatings)(Brief Article)
; ASTM International has released Manual 45, Radiation Curing of Coatings, a practical handbook to radiation curing technology. The 240-page book is $79 and available from ASTM at (610) 832-9585 or by e-mail to service@astm.org.
(book reviews)
; RADIATION CURING OF POLYMERIC MATERIALS Edited by...ACS Series #417, and is devoted to radiation curing. The volume is divided into the...radiation-cured systems; photodegradation; radiation curing of cationic polymerization; laser...