2002 Materials Handbook. (C).(Glossary) From: Ceramic Industry | Date: January 1, 2002 | COPYRIGHT 2002 BNP Media. This material is published under license from the publisher through the Gale Group, Farmington Hills, Michigan.  All inquiries regarding rights should be directed to the Gale Group.Copyright information

CADMIUM ANTIMONIDE. CdSb. Mol. wt. 234.2; m.p. 452[degrees]C. Crystallizes in the rhombic system with a = 6.26 angstroms, b = 7.98 angstroms, c = 9.55 angstroms. Hard, brittle, metallic gray material prepared by mining stoichiometric proportions of the pure constituents and heating in a sealed glass container under a low pressure of hydrogen, Cooling has to be slow, and further annealing is necessary, otherwise the product is very brittle and easily fragments into small pieces. The...

Related newspaper, magazine, and journal articles from HighBeam Research

	Age-hardenable nickel-base alloy: RA718 (UNS N07718) is a nickel alloy precipitation hardened by gamma prime and double prime. It is readily fabricated and is weldable even in the aged condition. The alloy is used for gas turbine components at temperatures up to 650[degrees]C (1200[degrees]F) as well as for cryogenic equipment.(Alloy Digest Data Sheet) Advanced Materials & Processes ; ALLOY 718 is strengthened by a precipitation hardening reaction involving columbium, titanium, aluminum, and nickel, with a degree of solid-solution strengthening by molybdenum. For alloy RA718, two commonly used heat treatments are as follows. * Treatment I: Anneal at 925-1010[degrees]C
	Is this man's beer too cold?: New eatery derives its name from the temperature at which it serves its brew -- 29 Degrees. Fort Worth Star-Telegram (Fort Worth, TX) ; ... 817-390-7718 barry@star-telegram.com Copyright (c) 2007, Fort Worth Star-Telegram, Texas Distributed by McClatchy-Tribune Business News. For reprints, email tmsreprints@permissionsgroup.com, call 800-374-7985 or 847-635-6550, send a fax to 847-635-6968, or write ...
	Macon hits 101 degrees on first day of summer: Triple-digit heat expected today. Macon Telegraph (Macon, GA) ; ... already for a hot summer, Sena said. Copyright (c) 2006, The Macon Telegraph, Ga. Distributed by Knight Ridder/Tribune Business News. For reprints, email tmsreprints@permissionsgroup.com, call 800-374-7985 or 847-635-6550, send a fax to 847-635-6968, or write ...
	Polyimide resin resists wear, can operate at 650[degrees]F (340[degrees]C).(Polymers/Ceramics) Advanced Materials & Processes ; A thermosetting polyimide resin called DMBZ-15 that reportedly exhibits better wear resistance than the benchmark PMR-15 resin and can operate at temperatures as high as 650[degrees]F (340[degrees]C) has been developed at NASA Glenn Research Center, Cleveland, Ohio, in collaboration with Maverick
	Akron's hot '06 tallied in report: Average temperature 2 degrees above 30-year norm, eco-group finds. Akron Beacon Journal (Akron, OH) ; Byline: Bob Downing Jul. 25--The state heated up last year, as temperatures were well above normal in Akron and other Ohio cities. Feeling the Heat, a report released Tuesday by Environment Ohio, said the average Akron temperature in 2006 -- 51.5 degrees -- was 2 degrees above the city's 30-year
	Aluminum soldered by 300 kW plasma lamp at 490[degrees]C.(Welding/Joining) Advanced Materials & Processes ; A high-density infrared 300 kW plasma lamp has been demonstrated to successfully solder aluminum with a solder consisting of 80 wt% Zn - 20 wt% aluminum, and a flux at a soldering temperature of 490[degrees]C (915[degrees]F), according to Aluminum Soldering--A New Look, a presentation at the 2003
	Today's forecast: 98 degrees. Charlotte Observer (Charlotte, NC ) ; ... temperatures begin tapering off later in the week. The only good news: Humidity levels are expected to be lower than normal for summer ... Charlotte Observer, N.C. Distributed by McClatchy-Tribune Business News. For reprints, email tmsreprints@permissionsgroup.com, call 800-374- ...
	Education Programs Leading to Postprofessional Degrees for Physical Therapists.(Directory) Physical Therapy ; Programs of graduate study are developed to meet the needs and interests of students. The programs listed below provide postprofessional graduate education opportunities for physical therapists; however, not all of the degrees offered by these programs are necessarily in physical therapy. Number of
	Very Low TC Resistors: 2 ppm/[degrees]C, 50[ohm] to 10 Meg. (ECN Literature News). ECN-Electronic Component News ; * Low TC Ultra-Stable Resistors, Standard Resistance Values with Tolerances to 0.01%, TC 2 ppm/[degrees]C, -40[degrees]C to +85[degrees]C. NEW Low TC Resistor Products: * Ultra-Stable High Volt Resistors, Tolerance 0.1%, TC 10 ppm/[degrees]C. * Chip Resistors: High Value 10 Meg to 100 Meg, 1% Tol.,
	CONVECTIVE HEATING BELOW 1000 degrees C. Advanced Materials & Processes ; High-temperature convective heating can be faster and provide better uniformity than radiant heating in a variety of applications. Thermal processing operations such as heat treating, joining, curing, and drying are carried out in many different types of furnaces and ovens. The method of heat

See all results.