|
Measuring Adhesion to Poly(olefins): The Role of Adhesion Promoter and Substrate.
From:
The Journal of Coatings Technology
| Date:
October 1, 2001| Author:
Britz, Dottie; Mihora, Dennis M.; Pierce, Russ; Ryntz, Rose A.
| COPYRIGHT 2001 Federation of Societies for Coatings Technology. This material is published under license from the publisher through the Gale Group, Farmington Hills, Michigan. All inquiries regarding rights should be directed to the Gale Group.Copyright information
|
Dennis M. Mihora [+]
Dottie Britz [*]
Russ Pierce [**]
The use of thermoplastic poly(olefins) in the automotive industry continues to proliferate due to their decreased cost and weight and increased recyclability in comparison to thermoplastics such as poly(carbonate) alloys or poly(urethanes). An attribute that continues to hamper the widespread introduction of thermoplastic poly(olefins), in particular thermoplastic olefin (TPO, a blend of impact...
Related newspaper, magazine, and journal articles from HighBeam Research
|
|
Measuring Adhesion to Poly(olefins): The Role of Adhesion Promoter and Substrate.
The Journal of Coatings Technology
; Dennis M. Mihora Dottie Britz Russ Pierce The use of thermoplastic poly(olefins) in the automotive industry continues to proliferate due to their decreased cost and weight and increased recyclability in comparison to thermoplastics such as poly(carbonate) alloys or poly(urethanes). An attribute
|
|
Getting the most out of chlorinated polyolefin (CPO) adhesion promoters.(Nuts And Bolts of Coatings Formulation)
Paint & Coatings Industry
; Editors Note: This is the third of a series of articles regarding the 'Nuts and Bolts' of formulating. It is intended to help formulators new to the industry, those who have changed jobs within the industry or simply as a refresher. Chlorinated polyolefin (CPO) adhesion promoters are widely used as
|
|
|
Examination of the distribution of TPO adhesion promoter material in a painted TPO system. (thermoplastics olefin)
The Journal of Coatings Technology
; ... hydrogen bonding ([[Delta].sub.h]) contributions as determined by Sphere software calculations (available from Dow Chemical). If one maps the relationship of the solubility parameter of the solvent to the solubility radius of the TPO ([ILLUSTRATION FOR FIGURE 7 OMITTED ...
|
|
|
Measuring Adhesion to Poly (Olefins): The Role of Adhesion Promoter and Substrate.
The Journal of Coatings Technology
; Measuring Adhesion to Poly (Olefins): The Role of Adhesion Promoter and Substrate--R.A. Ryntz etal Vol. 73, No, 921, 107 (Oct. 2001) The use of thermoplastic poly (olefins) in the automotive industry continues to proliferate due to their decreased cost and weight and increased recyclability in
|
|
A new and truly selective direct metallization process based on conductive polymers.
CircuiTree
; A new direct metallization process, based on the formation of a conductive polymer for Plating Through Hole (PTH) and Blind Micro-Via (BMV) plating, meets the reliability demands for High Density Interconnects (HDI) PCB and packaging applications. Due to reduced investment and running costs, their
|
|
It's In the Can
Automotive Body Repair News
; AEROSOL ADVANCEMENTS Use of these 16-to-24-oz. cans for small-area repairs is increasing, and paint manufacturers are responding with a variety of products During the past decade or so, aerosol products have gained acceptance for minor damage repairs in collision repair shops. The driving forces
|
|
Making materials work in combination. (Engineering Polymers)
British Plastics & Rubber
; FURTHER potential for combining the properties of different engineering polymers has been tapped by Huls with technology for combining nylon 12 with PVdF and PBT. Initial product development has been in automotive fuel lines where PA12 tubing can be made substantially more impervious to fuels. PA12
|
|
|
Eastman Chemical Co. (Materials Watch).
Paint & Coatings Industry
; Eastman Chemical Co. announces the latest additions to its portfolio of products for paint adhesion to olefin plastics: Eastman CP 730-1 chlorinated adhesion promoter and AP 550-1 nonchlorinated adhesion promoter. Both target the increasing performance demands of the automotive paint-on-plastic
|
|
|
Waterborne, chlorine-free adhesion promoter for TPO: effect of crystallinity on adhesion and gasoline-resistance performance properties.
Paint & Coatings Industry
; Due to their high chemical stability, low price. excellent balance of physical properties, possible recycling, etc., the amount of polypropylene (PP) and TPO consumed by automotive parts, household electrical appliances and molded general goods businesses is increasing. However, PP and TPO are
|
|
|
Nylon bonds to EPDM.(ENGINEERING MATERIALS)
British Plastics & Rubber
; A PROCESS for making hard-soft components combining nylon and EPDM without an adhesion promoter has been unveiled by Degussa. It says that previously nylons could only be moulded together with x-NBR, HNBR, FKM and AEM rubbers. But now its adhesion-modified PA 612 compound Vestamid DX9324 can bond
|