|
Mystics lose big time in first WNBA game.(Sports)
The Washington Times
|
June 12, 1998|
|
COPYRIGHT 1998 News World Communications, Inc. This material is published under license from the publisher through the Gale Group, Farmington Hills, Michigan. All inquiries regarding rights should be directed to the Gale Group.
(Hide copyright information)
Copyright
|
CHARLOTTE, N.C. - Jim Lewis certainly won't waste much time recalling his first game as coach of the WNBA's expansion Washington Mystics.
Charlotte guard Andrea Stinson and rookie forward Tracy Reid combined for 36 points as the Sting pummeled the Mystics 83-57 before 9,092 in a WNBA season opener last night at Charlotte Coliseum. The one-sided result spoiled Lewis' debut as a pro coach after 14 years at George Mason University.
Stinson (19 points) and Reid (17 points) fueled a Sting attack that averaged 85 points a game in the preseason. Reid, a ...
|
Rotary embossing: embossing gives labels that extra measure of appeal. Today's converters have a choice between metal and photo polymer embossing dies.
Magazine article from: Label & Narrow Web
; ...label converters who know about rotary embossing. "One of the main purposes of a label...Group) of Overland Park, KS, whose embossing tools are marketed by RotoMetrics...attention, does it stand out from the rest? Embossing adds another dimension because it is...
|
|
Hot embossing of discrete microparts.(Technical report)
Magazine article from: Polymer Engineering and Science
; INTRODUCTION The standard hot embossing process is designed for fabricating...size. During the process a heated embossing master, typically a metallic stamp...in tool and process setup, hot embossing has been widely used in polymer...
|
|
|
Through-thickness embossing process for fabrication of three-dimensional thermoplastic parts.(Technical report)
Magazine article from: Polymer Engineering and Science
; INTRODUCTION The standard hot embossing process is designed for imprinting...size. During the process a heated embossing master, typically a metallic stamp...in tool and process setup, hot embossing has been widely used in polymer...
|
|
|
A two-station embossing process for rapid fabrication of surface microstructures on thermoplastic polymers.
Magazine article from: Polymer Engineering and Science
; INTRODUCTION The hot embossing process involves several sequential...substrate. Finally, the entire embossing, including the polymer and the mold...cycling of the mold is needed during hot embossing. An inherent problem with the standard...
|
|
|
Experimental.(Hot embossing in microfabrication, part 1)(Statistical Data Included)
Magazine article from: Polymer Engineering and Science
; ...techniques for polymer microfabrication are hot embossing (2, 3), injection molding (4-8), and casting (9, 10). Hot embossing provides several advantages such as a relatively low cost for embossing tools, simple operation, and high replication...
|
|
|
Study on squeezing flow during nonisothermal embossing of polymer microstructures.
Magazine article from: Polymer Engineering and Science
; ...microfabrication technologies. The hot embossing technique [1] is a flexible, cost...the replication of a micromachined embossing master to generate microstructures on a polymer substrate. The hot embossing process involves several sequential...
|
|
A decorating alternative: The intricacies of embossing.
Magazine article from: Wearables Business
; Embossing is a subtle and elegant form of garment...or message. Over the last few years, embossing has become an accepted and desirable...screenprinting and embroidery. Although embossing appears to be a simplistic process...
|
|
|
Finite element modeling of polymer hot embossing using a glass-rubber finite strain constitutive model.(Technical report)
Magazine article from: Polymer Engineering and Science
; ...finite element simulations of micro-hot embossing across the glass transition. The model...transition leads to a wide range of required embossing force and springback. The interplay...can lead to significant increases in embossing force during the cooling stage, especially...
|
|
SUSS MicroTec Introduces Embossing Equipment for Nanoimprinting Technology.
PR Newswire
; ...geometries with three newly released embossing tools specifically designed to accommodate...nanostructures into a polymer layer. Embossing, stamping and molding techniques can...pattern generation, to apply different embossing techniques: the FC 150 Device Bonder...
|
|
Wisconsin Inventor Develops Moving Web Material Embossing Apparatus
News Wire article from: US Fed News Service, Including US State News
; ...Schulz of Greenville, Wis., has developed a moving web material embossing method. According to the U.S. Patent & Trademark Office: "An embossing system for embossing at least a portion of a web is provided comprising a first embossing...
|
Find more facts and information related to the
article "Mystics lose big time in first WNBA game.(Sports)"
