Thermosetting polyphenylene ether resin with low dielectric constant From: High Performance Plastics | Date: September 1, 1992 | COPYRIGHT 1992 International Newsletters. This material is published under license from the publisher through the Gale Group, Farmington Hills, Michigan.  All inquiries regarding rights should be directed to the Gale Group.Copyright information

A thermosetting polyphenylene ether (PPE) which has a low dielectric constant and good resistance to heat and chemicals has been developed by Asahi Chemical Industry Co Ltd of Tokyo, Japan. The resin has a heat resistance of 250degreeC and a dielectric constant of 3.0, much better than that of epoxy and polyimide resins.

Materials with low dielectric constants and good resistance to heat are increasingly in demand for use in printed circuit...

Related newspaper, magazine, and journal articles from HighBeam Research

	Materials requirements for high performance digital systems: the PWB design process must be more efficient as the industry seeks the optimum balance between design features, material properties, and total cost of ownership. CircuiTree ; There are only two important electrical properties of dielectric materials that affect performance in a high-speed digital system: the dielectric constant and the dissipation factor. There are only two applications of dielectric materials in a high speed digital system where the materials'
	An analysis of today's microwave materials. Microwave Journal ; For many years, the only materials available to microwave designers were Teflon[TM]-based materials, which used different methods of reinforcement involving fiberglass. These materials ranged from 2.17 to approximately 2.6 in dielectric constant. With the increased use of ceramics, the higher
	Dielectric constant of Turkish timbers in the longitudinal direction at a 9.8-GHz frequency. Forest Products Journal ; Abstract Applications of microwave techniques in the wood industry have been developed both for treatment and for diagnostic purposes. All these applications require reliable results of the dielectric constant of the wood species of interest. In this paper, the dielectric constant of the most
	Spandex "ROICA" from Asahi Chemical JTN Monthly ; What Is "ROICA"? "ROICA" is a registered trademark of Asahi Chemical Industry Co., Ltd. (Asahi Kasei) for polyurethane elastomeric yam (spandex). Asahi Chemical is an integrated and comprehensive producer of chemicals, and has annual sales of I trillion yen. Its fiber and textile operations consist
	A swept measurement for wireless material dielectric constant.(Technical Feature) Microwave Journal ; Most test methods used to test high frequency material do so at a single frequency. Since most circuits are supposed to operate over a band of frequencies, why shouldn't the material that is such a critical part of the circuits used for high frequency wireless applications be characterized over

See all results.