Minimum makes for maximum savings.(MACHINE TOOLS)(Ford Motor Co. uses lubrication systems from MAG Powertrain)

From: American Machinist | Date: June 1, 2008| Author: Bates, Charles | Copyright information

[ILLUSTRATION OMITTED]

Ford Motor Co.'s Van Dyke Transmission Plant has installed its second minimum quantity lubrication (MQL) machining system.

The system produces aluminum transmission cases, converter housings and valve bodies for the company's 6-speed transmission.

The minimum quantity lubrication system, from MAG Powertrain (www. mag-powertrain.com), eliminates the need for coolant systems and chip-handling equipment, and provides substantial ...

Read all of this article with a FREE trial to HighBeam Research

Related newspaper, magazine, and journal articles from HighBeam Research

MQL machining.(Metal Cutting)
American Machinist ; Horkos is showing its Minimum Quantity Lubrication (MQL) system, which reduces cutting-fluid flow by more than 1,000 to one versus conventional flood-coolant--flow is in mm/hr, not gpm. Air mixes in the spindle with minute amounts of cutting fluid to create ideally sized droplets, and then the
Toolholders for MQL.(cutting tool digest: Tooling and workholding)
American Machinist ; The modified internal design of Schunk's Tendo hydraulic toolholders resembles a spray-nozzle system without pockets or dead areas and reduces coolant consumption to 0.01 gallon/hr. The minimum quantity lubrication (MQL) coolant-air mixture sprays into working areas between tools and workpieces to
Near-dry-machining solution.(IMTS PRODUCT SHOWCASE: ABRASIVE MACHINING/FINISHING)
Fabricating & Metalworking ; Unist Inc. offers its Near Dry Machining, combining its Micro-Fluidization Systems used for fluid control and delivery with its vegetable-based lubricants, Coolube 2210 and 2210EP. The systems will perform CNC drilling and milling on a variety of materials, including aluminum and tool steel. Also
Practically dry deep-hole drilling. (Metal Cutting).
American Machinist ; Two Horkos near-dry machining centers are showcasing the potential of minimum quantity lubrication (MQL) for deep-hole drilling and other applications. At the shared Marubeni and Horkos booth, the HFN-R40H fixed-column horizontal machine drills deep holes in steel crankshafts. Depth-to-diameter
Heat-shrink tool presetter.(WESTEC PRODUCT SHOWCASE: TOOLING & WORKHOLDING)
Fabricating & Metalworking ; Zoller offers its Redomatic heat-shrink tool presetter and measuring machine. It features an integrated heat-shrink system with 10 KW capacity for 3-32 mm/0.12-1.26 inch shank diameter and 5-10 seconds heating time. The unit is now also available for tools with minimum quantity lubrication (MQL).