Ask Joe Powder.(Finishing answers)

From: Finishing Today | Date: May 1, 2008| Author: Pozeg, Joe; Priscilla | Copyright information

Hello Joe,

Can a decorative steel power-coated insert work in an outside fence made of pressure-treated lumber?

Joe Pozeg

Dear Joe,

There are at least a couple of issues to consider. First, will the powder hold up against the outdoor elements? Additionally, will the powder hold up against the nasty chemicals that are present in the pressure-treated board?

As for the first question, the powder will resist fading, chalking and...

Read all of this article with a FREE trial to HighBeam Research

Related newspaper, magazine, and journal articles from HighBeam Research

Ask Joe Powder.(Finishing answers)
Finishing Today ; Dear Joe, I have been told by my distributor that many powders contain ... contain a reference to the overbake performance. If it doesn't, ask the supplier directly. If you don't get a satisfactory answer ... to consider switching to a more forthcoming supplier. Dear Joe, What is the best everyday solvent? We ...
Ask Joe Powder.(Finishing: answers)
Finishing Today ; Dear Joe, I do not have any experience with the powder process. I realize that powder coated parts are supposed to be baked in an ... goes into the mix. Regardless, this technique is sometimes used to coat non-appearance parts at an economical cost. Dear Joe, We used to use a polyester baking enamel for metal office ...
Ask Joe Powder.(Finishing answer)
Finishing Today ; Dear Joe, Can powder coatings be used on wood for picket fences? Joe Schirmer Hello Joe, Indeed, you can powder coat wood for picket fences. The seminal issue is what type of wood should be used to build the ... of sight for complete cure, and the three-dimensional aspect of a picket will make curing all ...
Ask Joe Powder.(Finishing answers)(Letter to the editor)
Finishing Today ; Dear Joe, What are some possible causes for bubbling of powder over e-coat? I am a custom coater who occasionally powder coats an ... through the powder as it was curing. These are the first things to test. Please let me know if this solves your problem. Dear Joe, We are a leading manufacturer of automobile truck ...