Effect of curing conditions on the mortars with and without GGBFS. From: Construction and Building Materials | Date: March 1, 2008| Author: | COPYRIGHT 2008 Reed Business Information, Inc. (US). This material is published under license from the publisher through the Gale Group, Farmington Hills, Michigan.  All inquiries regarding rights should be directed to the Gale Group. (Hide copyright information) Copyright information

Abstract

The effect of curing conditions on properties of mortars with and without ground granulated blast furnace slag (GGBFS) was studied. In the present work, cement was replaced by ground granulated blast furnace slag 0% (control), 30%, and 60% by weight, and mortars were produced. One of the two groups of mortars was kept in water at 20[degrees]C standard conditions, and the other was kept in moisture cabinet at 40[degrees]C temperature and approximately at 100% relative humidity (RH). Flexural strength, compressive strength, ultrasonic pulse velocity, capillarity ...

Related newspaper, magazine, and trade journal articles from HighBeam Research

(Including press releases, facts, information, and biographies)

	Performance of ground blast furnace slag and ground basaltic pumice concrete against seawater attack. Magazine article from: Construction and Building Materials ; ...concrete incorporating ground blast furnace slag (GBS) and ground basaltic pumice...specimens. Keywords: Granule blast furnace slag; Ground basaltic pumice; Compressive...huge amount of disposed ground blast furnace slag waste in Iskenderun in Southern...
	Recovery of valuable metals from copper blast furnace slag Magazine article from: Minerals & Metallurgical Processing ; ...copper and nickel from copper blast furnace slag by carbon was studied. The...Key words: Recovery, Copper blast furnace slag, Two-stage reduction Introduction...Pb from an industrial copper blast furnace slag. As a part of this investigation...
	Recovery of copper from copper blast furnace slag Magazine article from: Minerals & Metallurgical Processing ; ...Key words: Copper recovery, Blast furnace slag, Reduction process, Smelting...innocuous material. Copper blast furnace slag contains significant amount...recovery of copper from a copper blast furnace slag. Carbothermic reduction kinetics...
	Evaluation of Blast Furnace Slag as a Means of Reducing Metal Availability in a Contaminated Sediment for Beneficial Use Purposes Magazine article from: Soil & Sediment Contamination ; ...specific chemical amendment (blast furnace slag) with slightly contaminated...Keywords Sediment, heavy metals, blast furnace slag Introduction Sediment contamination...availability (Barth et al., 2001). Blast furnace (BF) slag is a calcium alumino-silica...
	The effect of fineness on the properties of the blended cements incorporating ground granulated blast furnace slag and ground basaltic pumice.(Report) Magazine article from: Construction and Building Materials ; ...compared to ground granulated blast furnace slag (GGBFS). Blended cement had...basaltic pumice; Granulated blast-furnace slag: Fineness 1. Introduction Turkey...However, the production of Ground Blast Furnace Slag (GBFS) was about 0.75% and...
	The effect of slaked lime, anhydrous gypsum and limestone powder on properties of blast furnace slag cement mortar and concrete. Magazine article from: Construction and Building Materials ; Abstract Basic properties of blast furnace slag cement mortar and concrete...possibilities for manufacturing blast furnace slag cement, which could compensate...Carbonation 1. Introduction Although blast furnace slag cement has such good qualities...
	Hydration of Mechanically Activated Granulated Blast Furnace Slag Magazine article from: Metallurgical and Materials Transactions ; Ground granulated blast furnace slag (GGBFS) is known to possess latent...INTRODUCTION GROUND granulated blast furnace slag (GGBFS) is a glassy, granular...MATERIALS AND METHODS A. The Blast Furnace Slag A granulated BF slag sample from...
	Blast furnace rebirth; Newspaper article from: Post-Tribune (IN) ; ...VERSION A 175-ton portion of the No. 13 blast furnace structure is held in mid-air Thursday...of U.S. Steel's newly rebuilt No. 14 blast furnace at Gary Works.(PHOTO - Color) (LESLIE...rebuilding of U.S. Steel's largest blast furnace is massive. From the $260 million price...
	Bethlehem blast furnace to be down 3-4 more weeks Newspaper article from: Post-Tribune (IN) ; ...FROM PRINTED VERSION A Bethlehem Steel blast furnace will need three to four more weeks...their steel, the company added. The "D" blast furnace, one of two at Bethlehem's Burns Harbor...the repairs and to make additional blast furnace improvements that had been scheduled...
	International Steel Group Starts Second Blast Furnace. Newspaper article from: The Times (Munster, Indiana) (via Knight-Ridder/Tribune Business News) ; ...Ind.--With the startup of its second blast furnace, International Steel Group is operating...months after its startup. The No. 3 blast furnace was put into production on Sept. 10...Cleveland-based company. The startup of the blast furnace at the sister plant which supplies...

For more facts and information, see all results

Find more facts and information related to the article "Effect of curing conditions on the mortars with ..."