For good measure of pressure.(New Products)

From: Product Design & Development | Date: September 1, 2007 | Copyright information

According to Sensor Products Inc., its Pressurex[R] is a tactile pressure-indicating sensor film that can quickly and accurately reveal the distribution and magnitude of pressure between any 2 contacting, mating or impacting surfaces. Users can simply place the film between any 2 surfaces, and the color intensity of the film instantaneously and permanently changes to directly relate to the amount of pressure applied to it. Interpretation is conceptually similar to analyzing Litmus p...

Read all of this article with a FREE trial to HighBeam Research

Related newspaper, magazine, and journal articles from HighBeam Research

Age-hardenable nickel-base alloy: RA718 (UNS N07718) is a nickel alloy precipitation hardened by gamma prime and double prime. It is readily fabricated and is weldable even in the aged condition. The alloy is used for gas turbine components at temperatures up to 650[degrees]C (1200[degrees]F) as well as for cryogenic equipment.(Alloy Digest Data Sheet)
Advanced Materials & Processes ; ALLOY 718 is strengthened by a precipitation hardening reaction involving columbium, titanium, aluminum, and nickel, with a degree of solid-solution strengthening by molybdenum. For alloy RA718, two commonly used heat treatments are as follows. * Treatment I: Anneal at 925-1010[degrees]C
Why 15[degrees]? (Letters to the Editor).
Engineered Systems ; While reading Timothy Coyle's August 2002 Current Affairs column (page 32), I was struck by the idea of using the 15[degrees] delta T for a 95[degrees]F design day. My first impression was, Why 15[degrees]? In my first job out of college, working with power plant ventilation, I was taught to use a
Properties of TiAl sheet pack-rolled at temperatures below 1000 [degrees]C
Metallurgical and Materials Transactions ; TiAl alloy specimens with microcrystalline (MC, grain size is 5 [mu]m) and submicrocrystalline (SMC, grain size is 0.4 [mu]m) structures were successfully pack-rolled to sheet with a thickness down to 0.4 mm in the temperature ranges of 800 [degrees]C to 1000 [degrees]C and 900 [degrees]C to 1000
Internal Oven Provides Voltage Reference Less Than 1-ppm/[degrees]C Drift.(Technology Information)
Electronic Design ; When precision voltage-reference requirements demand less than 1-ppm/[degrees]C temperature drift, the designer can choose to use expensive components (off-the-shelf modules) or build a custom oven enclosure. This second choice is common among cost-sensitive designs where a less-expensive IC
Digital Sine-Wave Generator Produces 0[degrees] To 360[degrees] Phase-Shifts.(Technology Information)
Electronic Design ; Sine-wave generators with 0[degrees] to 360[degrees] phase-shifts are very important testing blocks in many systems involving DSP operations (i.e., I/Q modulator-demodulator communication, phase-angle measurements and up-down counter conversion in controls, and power electronics). The popular