Proposed design guidelines for strengthening of steel bridges with FRP materials.(fiber reinforced polymer)

From: Construction and Building Materials | Date: May 1, 2007| Author: | Copyright information

Abstract

This paper focuses on the use of externally bonded high modulus carbon fiber reinforced polymer (HM CFRP) materials to strengthen steel bridges and structures. Proper installation of the CFRP materials is necessary to prevent premature failure due to debonding. The paper proposes guidelines and installation techniques based on the best practice reported in the literature and the extensive practical experience in bonding of composite materials. The surface preparation of the materials, the application of the adhesive and the detailing of the strengthening are provided ...

Read all of this article with a FREE trial to HighBeam Research

Related newspaper, magazine, and trade journal articles from HighBeam Research

(Including press releases, facts, information, and biographies)

Increasing the flexural performance of RC beams strengthened with CFRP materials.
; Abstract In recent years scientific attention has focused on the use of FRP composites as the most promising technologies for repairing, strengthening or retrofitting existing structures to resist higher loads and to rectify damage. The use of external FRP as flexural strengthening gives advantages
Experimental behaviour of reinforced concrete column models strengthened by CFRP materials.(Carbon Fiber Reinforced Polymer)
; Abstract. Strengthening of the reinforced concrete structures is one of the most difficult and important tasks of civil engineering. The paper presents the problem of strengthening of reinforced concrete structures. Experimental tests of load-carrying capacity of reinforced concrete columns
Mitsubishi Rayon to Supply Composite Materials for Airbus A380.
; ...the aircraft maker's growing demand for carbon fibers and its reinforced polymer (CFRP) composites. Airbus's demand for CFRP materials is expected to rise steeply with the start of production of the A380 next-generation airliner as well as other aircraft...
Hybrid Material Composed of CFRP and Aluminum.(carbon fibre reinforced plastic from Toray Industries Inc)(Brief Article)
; ...be secured. This new CFRP material has been designed with a larger deformation property, than is the case with existing CFRP materials. The aluminum deformation achieved has not previously been displayed in conventional forms of aluminum. In joining the heterogeneous...
Durability Evaluation of Carbon Fiber-Reinforced Polymer Strengthened Concrete Beams: Experimental Study and Design
; ...ProQuest Information and Learning: ... denotes formulae omitted.) INTRODUCTION Today, carbon fiber-reinforced polymer (CFRP) materials are being used worldwide for the retrofitting and repair of deficient and old infrastructures such as bridges and buildings...
New optics eye COSMOS.
; ...strength and weight. At 160 kg, the tube represents a small fraction of the satellite's 4-ton weight. One problem in using CFRP materials on spacecraft is moisture absorption, explains Juhani Hanka of Finavicomp's Space Structures Unit. Outgassing in the vacuum...
Assessing the effectiveness of embedding CFRP laminates in the near surface for structural strengthening.
; ...work is to assess the benefits of the NSM strengthening technique on this type of structural elements. EBR techniques using CFRP materials have also been used to increase the shear resistance of RC beams [17-19]. Premature failures of these CFRP systems, however...
Feasibility investigation of the shear repair of timber stringers with horizontal splits.
; ...Research into the repair of timber stringers with horizontal shear splits has been limited. Carbon fiber reinforced polymers (CFRP) materials in the form of laminates or fabrics have been externally bonded to shear-critical zones in various configurations. Experimental...
Flexural behavior of aged prestressed concrete girders strengthened with various FRP systems.(Report)
; ...under service loading conditions of such girders is provided elsewhere [4]. 1.2. Background One of the most common uses of CFRP materials is to externally bond the material directly to the concrete surface. Externally bonding CFRP systems to concrete can be...
Anatomy of commercial aircraft: with low-cost air travel on the increase, airlines are fighting a price war. As such, aircraft manufacturers are resorting to the use of more fibre-reinforced plastics (FRPs) components to realise the low seat-to-mile advantages being demanded by airlines.(Composites)
; ...allowing a weight saving of up to 1.5 tonnes. Said Dr Jerome Pora, the A380's Structure Deputy Director, The interest in using CFRP materials is based on the fatigue and corrosion behaviour and associated weight benefits. In addition, a number of other innovations...