Minimum quantity exemption for yellow-fleshed Finnish-type potatoes.(rules and regulations for potatoes)(Brief article)

From: The Food Institute Report | Date: May 29, 2006 | Copyright information

AMS removed the minimum quantity exemption for yellow-fleshed Finnish-type potatoes from...

Read all of this article with a FREE trial to HighBeam Research

Related newspaper, magazine, and journal articles from HighBeam Research

USDA plans to remove the exception for yellow fleshed Finnish-type potatoes from the minimum quantity exemption of the handling regulations.(United States. Department of Agriculture)(Brief article)
The Food Institute Report ; USDA plans to remove the exception for yellow fleshed Finnish-type potatoes from the minimum quantity exemption of the handling regulations issued under the Idaho-Eastern Oregon potato marketing order.
Minimum makes for maximum savings.(MACHINE TOOLS)(Ford Motor Co. uses lubrication systems from MAG Powertrain)
American Machinist ; [ILLUSTRATION OMITTED] Ford Motor Co.'s Van Dyke Transmission Plant has installed its second minimum quantity lubrication (MQL) machining system. The system produces aluminum transmission cases, converter housings and valve bodies for the company's 6-speed transmission. The minimum quantity
Analysis of supply contracts with total minimum commitment.
IIE Transactions ; 1. Introduction Traditional (periodic review) stochastic inventory models analyze what can be viewed as, a class of supply contracts that specifies a per-unit purchase cost and the buyer places orders periodically. In all these models, there are no restrictions placed on the buyer regarding
Near-Dry Machining Cuts the Heat
Manufacturing Engineering ; Systems for supplying minimum quantities of cutting fluid are slipping into shops that use traditional flood-cooling-though slowly "Metal working fluids are not costly in themselves, but they can run up the costs of production if poorly chosen or improperly handled and controlled." This is a
COURT REPORT
Supply Management ; [M&J Polymers Ltd v Imerys Minerals Ltd] THE CASE M & J Polymers Ltd (MSJ) supplied chemical dispersants to Imerys Minerals Ltd (Imerys). The supply contract contained a provision requiring Imerys to order a minimum quantity of product. It also contained a "take-or-pay" provision that
THAT WAS THE YEAR THAT WAS.(Brief Article)(Statistical Data Included)
Grocer ; 10 July 21, 1990. Nearly everything went wrong for Asda over the past year. Nonfood sales were hit by a decline in consumer demand; the profit contribution from 25% owned Allied Maples and MFI nosedived; borrowings on the 704m [pounds sterling] acquisition of 61 Gateway superstores were affected by
Itamar Medical signs deal with US device co Evo Medical: The company's sales through the US distributor are likely to exceed NIS 11 million in 2007.
Globes (Tel Aviv, Israel) ; Byline: Gali Weinreb Jul. 2--Itamar Medical Ltd. (TASE: ITMR) announced yesterday that it has signed an exclusive distribution agreement in the US (limited to specific medical sectors) with US medical device company Evo Medical Solutions, for the distribution of its Watch Pat 100 sleep disorder
FAA. (News Briefs: North America Report).(Federal Aviation Administration awards contract to General Dynamics Decision Systems to deliver CM-300 series ATC radios)(Brief Article)
Air Transport World ; FAA awarded a contract to General Dynamics Decision Systems to deliver up to 20,000 CM-300 series ATC radios over the next 10 years. Minimum quantity under the contract is 1,000 radios valued at $5.8 million. The deal has a potential value of up to $119 million.
MQL machining.(Metal Cutting)
American Machinist ; Horkos is showing its Minimum Quantity Lubrication (MQL) system, which reduces cutting-fluid flow by more than 1,000 to one versus conventional flood-coolant--flow is in mm/hr, not gpm. Air mixes in the spindle with minute amounts of cutting fluid to create ideally sized droplets, and then the
Toolholders for MQL.(cutting tool digest: Tooling and workholding)
American Machinist ; The modified internal design of Schunk's Tendo hydraulic toolholders resembles a spray-nozzle system without pockets or dead areas and reduces coolant consumption to 0.01 gallon/hr. The minimum quantity lubrication (MQL) coolant-air mixture sprays into working areas between tools and workpieces to