State of the art agitations.(painting clinic) From: Products Finishing | Date: September 1, 2005| Author: Kushner, Arthur S. | COPYRIGHT 2005 Gardner Publications, Inc. This material is published under license from the publisher through the Gale Group, Farmington Hills, Michigan.  All inquiries regarding rights should be directed to the Gale Group.Copyright information

Q. My chemical vendor has recommended using eductors to agitate my plating solutions. Can you tell me more about this agitation process? Is it expensive to install? How does it compare to air agitation? M.A.

A. Your vendor is giving you good advice. Using eductors gives you much improved agitation compared to air or mechanical agitation. I addressed this question in an earlier Plating Clinic column. At that time, I wrote the following:

A paper, Exploitation of...

Related newspaper, magazine, and journal articles from HighBeam Research

	Eductor redux.(PLATING CLINIC) Products Finishing ; Q. We are looking for a better way to agitate our plating baths. Currently we are using air agitation but one of our vendors has suggested using eductors. Should we and if so, why? S. W. A. The short answer to your question is an unequivocal yes. I addressed this question in one of my earlier
	Collisions of small drops in a turbulent flow. Part I: Collision efficiency. Problem formulation and preliminary results Journal of the Atmospheric Sciences ; ABSTRACT A mathematical approach to the calculation of the collision efficiency between droplets within a turbulent flow is suggested. The problem of drops' hydrodynamic interaction is reconsidered taking into account additional inertia-induced relative velocities between droplets of different
	Turbulence in the Fast Lane USA Today ; Although NASA's X-43A and other hypersonic airplanes use air-breathing engines and fly much like 747s, there is a big difference between ripping air at Mach 10 (around 7,000 mph) and cruising through it at 350 mph. These differences are even more pronounced when hypersonic aircraft sip rarified air
	Pinning Down Turbulent Flow Via New Formula Mechanical Engineering ; TO MOST PEOPLE, turbulence is the rolling and jolting that airplane passengers sit through as their jet moves through a rough pocket of air. But to engineers and scientists, turbulence is the chaotic flow of a gas or liquid in which parts of the current curl into irregular, ever smaller and tighter
	Pinning down turbulent flow via new formula.(computing)(Brief Article) Mechanical Engineering-CIME ; TO MOST PEOPLE, turbulence is the rolling and jolting that airplane passengers sit through as their jet moves through a rough pocket of air. But to engineers and scientists, turbulence is the chaotic flow of a gas or liquid in which parts of the current curl into irregular, ever smaller and tighter

See all results.