Process for the physical testing of rubber.(Patent News)

From: Rubber World | Date: June 1, 2005 | Copyright information

U.S. patent: 6,829,951

Issued: December 14, 2004

Inventors: John Putman and Matthew C. Putman

Assigned: Tech Pro

Keywords: This process provides a method for determining an optimal time for changing the test conditions to which the rubber sample is ...

Read all of this article with a FREE trial to HighBeam Research

Related newspaper, magazine, and trade journal articles from HighBeam Research

(Including press releases, facts, information, and biographies)

New-Generation DMA. (Computer Hardware & Software).
; ...polymeric materials over a wide range of test conditions, reports the manufacturer, EnduraTec...Pointing out that combining multiple test conditions can create a comprehensive material...algorithms said to provide the desired test conditions without the need for tuning; automatic...
Testing PSI & PSI missing
; ...methodological issues, but to differences in "test conditions." Test conditions are hypothesized to influence the outcome...Schmeidler, 1966,396). In support of the test conditions hypothesis, parapsychologists have identified...
TESTING PSI & PSI-MISSING.(Brief Article)
; ...methodological issues, but to differences in test conditions. Test conditions are hypothesized to influence the outcome...Schmeidler, 1966, 396). In support of the test conditions hypothesis, parapsychologists have identified...
(book review)
; ...are presented relative to different test conditions, exposure environments and test specimen...easy comparison between material and test conditions. New to this edition is textual summary...easy comparison between materials and test conditions. (William Andrews Publishing)
Simplified rubber compound management. (Chemix software)
; ...including a wealth of raw materials, test conditions and physical properties associated...enter raw materials, properties and test conditions and manipulate the formulation database...be maintained for each company. * Test conditions and physical properties. Test ...
EXECUTIVE SUMMARY.
; ...temperature, strain and frequency test conditions like Dynamic Mechanical Rheological...tests, the industry adopted standard test conditions and standard data outputs so routine...that are being considered as standard test conditions and standard test results for RPA...
DMA software.(New Products)
; ...biological and polymeric materials over a wide range of test conditions. Based on the company's WinTestr Digital Control System...properties with minimal operator interaction. Combining multiple test conditions can create a comprehensive material analysis. The new DMA...
WorldSID Dummy Head-Neck Biofidelity Response
; ...been assessed against a set of five test conditions that have been used to define biofidelity...response targets. Three of the five test conditions are recommended by ISO TR9790 (ISO...The latter and two of the ISO TR9790 test conditions form the basis of the draft IHRA ...
Reliability of wear volume measurement approaches in relation to the effect of surface finish on friction and wear of AI2O3
; ...due to a lack of adequate control of test conditions and unreliable measurement techniques...same type of material under identical test conditions but in different laboratories can...a lack of adequate control of the test conditions and unreliable measuring techniques...
Handheld LCR/ESR meter. (Test & Measurement).(B&K Precision 886)(Brief Article)
; * Tests components at maximum frequencies of 100 kHz * Offers a large variety of measurement parameters and test conditions * Model 886, $769 B&K Precision, 1-714-237-9220, www.bkprecision.com No. 366