|
Exclusive guide to synthetic lubricants.
From:
Plant Engineering
| Date:
July 1, 2003| Author:
Foszcz, Joseph L.
| COPYRIGHT 2003 Reed Business Information. This material is published under license from the publisher through the Gale Group, Farmington Hills, Michigan. All inquiries regarding rights should be directed to the Gale Group.Copyright information
|
Key Concepts
* These lubricants reduce wear and provide long life.
* Synthetics can e formulated to satisfy application requirements.
* The chart lists product offerings from 79 companies.
Synthetics are the logical lubricant choice in a number of applications, including when:
* Equipment failure or excessive downtime is attributed to ineffective lubrication products or practices
* Application demands are beyond the...
Related newspaper, magazine, and journal articles from HighBeam Research
|
|
Exclusive guide to synthetic lubricants.
Plant Engineering
; Key Concepts * These lubricants reduce wear and provide long life. * Synthetics can e formulated to satisfy application requirements. * The chart lists product offerings from 79 companies. Synthetics are the logical lubricant choice in a number of applications, including when: * Equipment failure
|
|
|
High-temp grease has drop point of 630 deg F.
Plant Engineering
; Paragon 3000 high-temperature, extreme pressure grease has a dropping point of 630 deg F, plus outstanding extreme pressure chemistry with 100 lb Timken OK load. The nonclay base grease is water-resistant, highly impact resistant, and offers excellent mechanical stability and long service life.
|
|
|
PLANT ENGINEERING magazine's exclusive guide to interchangeable lubricants 2001.(Buyers Guide)
Plant Engineering
; When, where, how much, and with what -- these are the fundamental questions to answer in equipment lubrication. The answers are normally provided by the makers of process and manufacturing equipment. However, maintenance personnel must sometimes address the with what question when finding
|
|
Extreme pressure.(Brief Article)(Illustration)
Design News
; Extreme Pressure Pressures engineers design for Under 1,000 psi 21% 1,000-1,9000 psi 9% 2,000-2,999 psi 27% 3,000-4,999 psi 28% 5,000 psi and above 15% Source: Design News Note: Table made from bar graph
|
|
|
Food plant lubes.(Lubrication: Products)
Plant Engineering
; Nevastane EP extreme pressure, white, oil-based lubricants can be used in gear reducers and bearings in all types of equipment found in food processing plants. They are also highly effective for reciprocating air compressors and other machinery. In addition to extreme pressure protection, these
|
|
Catalogue of complaints over man's care
Plymouth Evening Herald, The
; Hospital bosses have apologised for 'unacceptable' conditions a Plymouth patient encountered at Christmas - saying Derriford was under 'extreme pressure'. Sarah Mason, aged 61, of Plympton, confronted leading Derriford managers about the care her brother received after being admitted on Christmas
|
|
ChevronTexaco Delo Grease EP.(Oils And Lubes)
Equipment Today Magazine
; Delo Grease EP (extreme pressure) improves mechanical stability and water resistance. * For light- to heavy-duty trucks and off-road equipment * Uses ISOSYN technology for synthetic-type performance * Extreme pressure high-load carrying capacity * Low temperature pumpability and high-temperature
|
|
|
ChevronTexaco Delo Grease EP.(Oils & Lubricants)
Equipment Today Magazine
; Delo Grease EP (extreme pressure) improves mechanical stability and water resistance. * For light- to heavy-duty trucks and off-road equipment * Uses ISOSYN technology for synthetic-type performance * Extreme pressure high-load carrying capacity Indicate 99 on inquiry card [ILLUSTRATION OMITTED]
|
|
|
ChevronTexaco Delo Grease EP.(Oil & Lubricants)
Equipment Today Magazine
; Delo Grease EP (extreme pressure) improves mechanical stability and water resistance. * For light- to heavy-duty trucks and off-road equipment * Uses ISOSYN technology for synthetic-type performance * Extreme pressure, high-load carrying capacity * Low-temperature pumpability and high-temperature
|
|
|
Plant Engineering's interchangeable lubricants.(2004 Exclusive Guide)
Plant Engineering
; When, where, how much, and with what--these are the fundamental questions that have to be answered in equipment lubrication. The answers are normally provided by the builders of process and manufacturing equipment. [ILLUSTRATION OMITTED] However, maintenance personnel must sometimes address the
|