curing
From: The Columbia Encyclopedia, Sixth Edition
|
Date: 2008
curing see fish curing .
Author not available, CURING.,
The Columbia Encyclopedia, Sixth Edition 2008
The Columbia Encyclopedia, Sixth Edition. Copyright 2008 Columbia University Press
For permission to reuse this article, contact Copyright Clearance Center.
Related articles from HighBeam Research:
|
Experimental study of early-age behavior of high performance concrete deck slabs under different curing methods.
Construction and Building Materials; 12/1/2006; Huo, X. Sharon Wong, Ling Ung; 4460 words;
Abstract Curing techniques and curing duration have crucial effects to the strength and durability of concrete. Proper curing can protect against moisture loss from fresh concrete. The objective ...
|
|
A review of radiation curing: new surface control additives.
The Journal of Coatings Technology; 3/1/1996; Bowling, Karen Adams, Jay Struck, Susanne; 3417 words;
Radiation curing is a process whereby reactive liquids ... industry nearly 30 years ago, radiation curing technology has benefited from an extremely ... growth rate. During the 1980s the radiation curing coatings market grew at an annual rate ...
|
|
|
Self-curing concrete: water retention, hydration and moisture transport.
Construction and Building Materials; 6/1/2007; Dieb, A.S. El-; 3024 words;
... retention of concrete containing self-curing agents is investigated. Concrete weight ... to evaluate the water retention of self-curing concrete. Non-evaporable water at different ... permeability. The water transport through self-curing concrete is evaluated with age. The effect ...
|
|
Radiation curing develops rapidly.(Fine Chemicals)
China Chemical Reporter; 9/16/2005; 1203 words;
Radiation curing including ultraviolet (UV) curing and electric beam (EB) curing is an advanced material surface treatment technology. It is not yet 40 years since Bayer of Germany first developed radiation curing wood product coatings and commercialized ...
|
|
|
Global trends in the radiation curing market. (Special Report).(Illustration)
China Chemical Reporter; 2/6/2003; Yanxiao, Lu; 2341 words;
Japan holds half of the radiation curing market in Asia, with China holding 12.4%. The output of radiation curing products in China was close to 40 000 ... average annual rate of 25%. Radiation curing has the feature of rapid curing at normal ...
|
|
Curing with a twist: adding robots to UV technology allows curing of complex 3-D parts.
Products Finishing; 6/1/2006; Mills, Paul; 2076 words;
Ultraviolet curing requires direct line-of-sight between the ... simple shapes, their sheer size can make curing them a challenge. That's because many of the UV lamps that were developed for curing small and simple profiles like optical fibers ...
|
|
Comparative Study of Continuous-Power and Pulsed-Power Microwave Curing of Epoxy Resins.
Polymer Engineering and Science; 10/1/2000; FU, BAO HAWLEY, MARTIN C.; 5333 words;
... systems, diglycidyl ether of bisphenol A (DGEBA) with curing agents meta phenylene diamine (mPDA), diaminodiphenyl ... both pulsed-power and continuous-power microwave curing systems. Isothermal curing was conducted at three different temperatures for ...
|
|
|
Radiation curing develops stably.(Market share report)
China Chemical Reporter; 10/26/2006; 1303 words;
Radiation curing including ultraviolet (UV) curing and electric beam (EB) curing is an advanced material surface treatment technology. In advanced countries and regions such as North America, Western Europe and Japan, a considerable market scale ...
|
|
The EB advantage: modern EB curing technology can provide a viable, cost-effective solution to complex curing challenges.(UV/EB TECHNOLOGY: ELECTRON BEAM CURING)
Finishing Today; 4/1/2008; Epstein, Josh; 1478 words;
[ILLUSTRATION OMITTED] Electron beam (EB) curing is one of the most powerful industrial curing technologies commercially available today. Historically relegated to niche applications, EB curing has long been recognized as an option for addressing ...
|
|
|
Comparison of four methods for monitoring the kinetics of curing of a phenolic resin.
Polymer Engineering and Science; 1/1/2005; Malkin, A.Ya. Gorbunova, I.Yu. Kerber, M.L.; 4530 words;
INTRODUCTION The kinetics of oligomer curing govern both the duration of the process ... when discussing the kinetics of oligomer curing, it is necessary to first state the method ... popular method for monitoring oligomer curing [1-5], but it is well known that this ...
|
|
Growth and use of radiation-curing technology in China.(Market Update)
JCT CoatingsTech; 10/1/2005; Wang, Qingfeng Shi, Wenfang; 4271 words;
... Oligomers are another important raw material for UV curing. Although most oligomers were formerly imported ... countries. Photoinitiator is a key product for UV curing, having the fastest growth rate in the last three ... shares of different raw materials used in UV curing industries. UV FORMULATIONS There ...
|
|
|
Recent advances in UV-curing chemistry.
The Journal of Coatings Technology; 4/1/1993; Decker, Christian Moussa, Khalil; 4641 words;
INTRODUCTION Radiation curing is known to be one of the most efficient ... continuously and quantitatively the curing process. This method proved particularly ... HIGH-PERFORMANCE PHOTOINITIATORS UV-Curing of Acrylic Resins Photoinitiators which ...
|
|
|
Radiation curing made easier: new software can help formulators, manufacturers and finishing engineers in the radiation curing industry improve productivity and shorten the delivery of new products to market.(TECHNOLOGY: RADIATION CURING)
Finishing Today; 8/1/2006; Thommes, Glen A. Thommes, Jeffrey Eaton, David F. Mickish, Daniel; 3328 words;
Radiation curing is a small but fast-growing segment of ... GDP growth rates, while the radiation curing segment, representing only 3.2% of the ... annualized rate of 6%. (1) However, radiation curing is much more than simple conformal coatings ...
|
|
|
Effect of curing conditions on the mortars with and without GGBFS.
Construction and Building Materials; 3/1/2008; Cakir, O. Akoz, F.; 3914 words;
Abstract The effect of curing conditions on properties of mortars ... at slag replaced mortars. Keywords: Curing condition; Ground granulated blast furnace ... especially at lower temperatures, longer curing period and carbonation [6]. The necessity ...
|
|
Curing with light.(light-curing adhesives and equipment)
Assembly; 8/1/1999; Bachmann, Andrew G.; 1672 words;
Carefully chosen light-curing adhesives and equipment can increase ... Ultraviolet (UV) and broad-spectrum light-curing resins can reduce costs for many assembly ... developed for inks and thin coatings, light curing did not become popular for other applications ...
|
See all results from premium newspaper and magazine articles, images, maps and more at HighBeam Research.
Related articles from newspapers, magazines and other sources:
Curing and canning of fishery products: a history.
Marine Fisheries Review; 9/22/1988; Jarvis, N.D.; 5731 words;
|
How much curing is enough? We all know that concrete should be cured, but at what point do we say that curing is adequate?
Concrete Construction; 12/1/2003; Erlin, Bernie Nasvik, Joe Powers, Laura; 1723 words;
|
The make-or-break process: with an eye on the bottom line, the producer increasingly is trying to optimize the curing process. (Product Pulse).
The Concrete Producer; 7/1/2003; Talend, Don; 1488 words;
|
Curing concrete slabs. (Concrete Basics).
Concrete Construction; 12/1/2002; Nasvik, Joe; 744 words;
|
Curing with well water.(Problem Clinic)
Concrete Construction; 6/1/2005; 456 words;
|
Wet curing concrete floors: single-use curing blankets provide uniformly colored slabs.
Concrete Construction; 8/1/2005; France, Tim K.; 1458 words;
|
Terminology, technology, and troubleshooting: curing lights.(light emitting diode)
The Dental Assistant; 7/1/2005; Wallace, Victoria L.; 1719 words;
|
Curing concrete.
Concrete Construction; 5/1/2003; 286 words;
|
Why use curing compounds?(Decorative Tip of the Month)
Concrete Construction; 1/1/2005; 98 words;
|
Fusion UV Curing Systems, a subsidiary of Fusion Systems Corp., has opened an automotive application process evaluation laboratory
Autoparts Report; 4/17/1995; 67 words;
|
|
|